Effectiveness of a soil mapping geomatic approach to predict the spatial distribution of soil types and their properties

A soil map (1:50,000 scale) was recently produced in Sardinia (Italy) using a cost-effective GIS approach. In this study we aimed to verify, in two pilot areas and by means of statistical analysis, the effectiveness of the adopted methodology in representing and predicting the spatial distribution of soil types and properties. We focused on evaluation of 1) the influence of landforms and parent materials on soil types (WRB Reference Soil Groups) and selected soil properties and 2) the suitability of the adopted methodology for calibrating a model to predict land unit composition in terms of different soil types. Leptosols, Regosols and Cambisols were prevalent on slopes, with Leptosols being more frequent on convex slopes and Regosols and Cambisols on concave slopes. In flat areas, soil types mainly depended on the type and age of parent material, with Regosols and Cambisols prevailing on Holocene deposits and highly developed soils (mainly Luvisols) largely prevailing on Pleistocene deposits. On hard rock, Leptosols were very frequent on terrigenous metamorphic rock and frequent on granite. Besides Leptosols, Regosols occurred more frequently than Cambisols on both parent materials. Landforms strongly influenced soil depth and available water capacity. Soils on plains were deeper than those on slopes, where convex forms had shallower soils than concave forms. A similar trend applied to the available water capacity. The parent material had a significant effect on topsoil properties (thickness, texture, pH and organic carbon content) of soils belonging to the same WRB Reference Soil Group (analysis done on the most relevant WRB Reference Soil Groups, i.e. Leptosols, Regosols and Cambisols). We calibrated and tested stepwise multiple linear regressions (MLR) and general linear models (GLM) to predict the composition of map units in terms of different WRB Reference Soil Groups. The two models gave very similar results, with distinct distribution patterns that were coherent with the relationships observed between soil groups and specific combination of terrain attributes and parent materials. Results showed that both models were more reliable in predicting the absence rather than presence of a given soil type

Cochlear Implant Outcomes and Genetic Mutations in Children with Ear and Brain Anomalies

Background. Specific clinical conditions could compromise cochlear implantation outcomes and drastically reduce the chance of an acceptable development of perceptual and linguistic capabilities. These conditions should certainly include the presence of inner ear malformations or brain abnormalities. The aims of this work were to study the diagnostic value of high resolution computed tomography (HRCT) and magnetic resonance imaging (MRI) in children with sensorineural hearing loss who were candidates for cochlear implants and to analyse the anatomic abnormalities of the ear and brain in patients who underwent cochlear implantation. We also analysed the effects of ear malformations and brain anomalies on the CI outcomes, speculating on their potential role in the management of language developmental disorders. Methods. The present study is a retrospective observational review of cochlear implant outcomes among hearing-impaired children who presented ear and/or brain anomalies at neuroimaging investigations with MRI and HRCT. Furthermore, genetic results from molecular genetic investigations (GJB2/GJB6 and, additionally, in selected cases, SLC26A4 or mitochondrial-DNA mutations) on this study group were herein described. Longitudinal and cross-sectional analysis was conducted using statistical tests. Results. Between January 1, 1996 and April 1, 2012, at the ENT-Audiology Department of the University Hospital of Ferrara, 620 cochlear implantations were performed. There were 426 implanted children at the time of the present study (who were <18 years). Among these, 143 patients (64 females and 79 males) presented ear and/or brain anomalies/lesions/malformations at neuroimaging investigations with MRI and HRCT. The age of the main study group (143 implanted children) ranged from 9 months and 16 years (average = 4.4; median = 3.0). Conclusions. Good outcomes with cochlear implants are possible in patients who present with inner ear or brain abnormalities, even if central nervous system anomalies represent a negative prognostic factor that is made worse by the concomitant presence of cochlear malformations. Common cavity and stenosis of the internal auditory canal (less than 2 mm) are negative prognostic factors even if brain lesions are absent

First principle theory of correlated transport through nano-junctions

We report the inclusion of electron-electron correlation in the calculation of transport properties within an ab initio scheme. A key step is the reformulation of Landauer's approach in terms of an effective transmittance for the interacting electron system. We apply this framework to analyze the effect of short range interactions on Pt atomic wires and discuss the coherent and incoherent correction to the mean-field approach.Comment: 5 pages, 3 figure

Hybrid cellulose–Basalt polypropylene composites with enhanced compatibility. The role of coupling agent

This study deals with the development and optimization of hybrid composites integrating microcrystalline cellulose and short basalt fibers in a polypropylene (PP) matrix to maximize the mechanical properties of resulting composites. To this aim, the effects of two different coupling agents, endowed with maleic anhydride (MA-g(grafted)-PP) and acrylic acid (AA-g-PP) functionalities, on the composite properties were investigated as a function of their amount. Tensile, flexural, impact and heat deflection temperature tests highlighted the lower reactivity and effectiveness of AA-g-PP, regardless of reinforcement type. Hybrid formulations with basalt/cellulose (15/15) and with 5 wt. % of MA-g-PP displayed remarkable increases in tensile strength and modulus, flexural strength and modulus, and notched Charpy impact strength, of 45% and 284%, 97% and 263%, and 13%, in comparison with neat PP, respectively. At the same time, the thermo-mechanical stability was enhanced by 65% compared to neat PP. The results of this study, if compared with the ones available in the literature, reveal the ability of such a combination of reinforcements to provide materials suitable for automotive applications with environmental benefits

Correlation between mechanical properties and processing conditions in rubber-toughened wood polymer composites

The use of wood fibers is a deeply investigated topic in current scientific research and one of their most common applications is as filler for thermoplastic polymers. The resulting material is a biocomposite, known as a Wood Polymer Composite (WPC). For increasing the sustainability and reducing the cost, it is convenient to increase the wood fiber content as much as possible, so that the polymeric fraction within the composite is thereby reduced. On the other hand, this is often thwarted by a sharp decrease in toughness and processability-a disadvantage that could be overcome by compounding the material with a toughening agent. This work deals with the mechanical properties in tension and impact of polypropylene filled with 50 wt.% wood flour, toughened with different amounts (0%, 10%, and 20%) of a polypropylene-based thermoplastic vulcanizate (TPV). Such properties are also investigated as a function of extrusion processing variables, such as the feeding mode (i.e., starve vs. flood feeding) and screw speed. It is found that the mechanical properties do depend on the processing conditions: the best properties are obtained either in starve feeding conditions, or in flood feeding conditions, but at a low screw speed. The toughening effect of TPV is significant when its content reaches 20 wt.%. For this percentage, the processing conditions are less relevant in governing the final properties of the composites in terms of the stiffness and strength

High availability using virtualization - 3RC

High availability has always been one of the main problems for a data center. Till now high availability was achieved by host per host redundancy, a highly expensive method in terms of hardware and human costs. A new approach to the problem can be offered by virtualization. Using virtualization, it is possible to achieve a redundancy system for all the services running on a data center. This new approach to high availability allows the running virtual machines to be distributed over a small number of servers, by exploiting the features of the virtualization layer: start, stop and move virtual machines between physical hosts. The 3RC system is based on a finite state machine, providing the possibility to restart each virtual machine over any physical host, or reinstall it from scratch. A complete infrastructure has been developed to install operating system and middleware in a few minutes. To virtualize the main servers of a data center, a new procedure has been developed to migrate physical to virtual hosts. The whole Grid data center SNS-PISA is running at the moment in virtual environment under the high availability system.Comment: 10 page

Bilateral osseous stenosis of the internal auditory canal: case report

Osteomas as well as exostoses of the internal auditory canal are rare, benign, usually slow-growing lesions. The most common localizations of these temporal bone lesions are the mastoid cortex and the external auditory canal. A rare case is reported of bilateral osseous stenosis of the internal auditory canal, in the absence of clinical (auditory, vestibular and facial nerve) symptoms. In the absence of auditory, vestibular and/or facial nerve symptoms, long-term follow-up should be assessed; surgical intervention may be warranted only if symptoms are present

Recent results from the Arctic Radiation and Turbulence Interaction STudy (ARTIST) project

Ground-based measurements were conducted at Ny-˚Alesund in the Svalbard Islands in the framework of the research project ARTIST (Arctic Radiation and Turbulence Interaction STudy) funded by the European Communities. Key objectivesof the campaign were: 1) provide all participantswith ground reference data as input to models describing the development of the atmospheric boundary level, 2) compute the surface roughness length in order to characterise the surface of the site, 3) parameterise the surface energy exchanges, calculating the surface radiation flux, the sensible and latent heat fluxes, and 4) obtain the surface energy balance during both clear and cloudy sky conditions. The cloud radiative forcing has been also estimated. Final results of the analysis of the data set are presented

The effect of magnetic impurities in a two-band superconductor: A point-contact study of Mn-substituted MgB2 single crystals

We present the first results of directional point-contact measurements in Mg_{1-x}Mn_{x}B_2 single crystals, with x up to 0.015 and bulk T_c down to 13.3 K. The order parameters Delta_{sigma} and Delta_{pi} were obtained by fitting the conductance curves with the two-band Blonder-Tinkham-Klapwijk (BTK) model. Both Delta_{pi} and Delta_{sigma} decrease with the critical temperature of the junctions T_c^A, but remain clearly distinct up to the highest Mn content. Once analyzed within the Eliashberg theory, the results indicate that spin-flip scattering is dominant in the sigma band, as also confirmed by first-principle band structure calculations.Comment: 4 pages, 5 eps figures. New theoretical results added, text and some figures changed. References adde

Isolation and molecular typing of Leishmania infantum from Phlebotomus perfiliewi in a reemerging focus of leishmaniasis, Northeastern Italy

Visceral leishmaniasis (VL) caused by Leishmania (L.) infantum is a public health threat in the Emilia-Romagna region, northeastern Italy, but its epidemiology has not been fully elucidated in this area. The objective of this study was to characterize Leishmania infection in sand flies collected in a re-emerging focus of VL in the Bologna province. During the summer of 2016, 6114 sand flies were collected, identified, and tested for Leishmania detection. Of the identified sand flies, 96.5% were Phlebotomus (P.) perfiliewi and 3.5% were P. perniciosus. Detected parasites were characterized by biomolecular methods (multilocus microsatellite typing and characterization of repetitive region on chromosome 31), and quantified by real-time PCR. The prevalence of Leishmania infection in individually-tested P. perfiliewi sand flies varied from 6% to 10% with an increasing trend during the season. Promastigotes of L. infantum were isolated by dissection in one P. perfiliewi female; the isolated strain (Lein-pw) were closely related to Leishmania parasites from VL cases in northeastern Italy, but differed from strains isolated in dogs from the same area. Our findings strongly support the vector status of P. perfiliewi for human VL in the study area