Advanced nickel-hydrogen cell configuration study

Three nickel hydrogen battery designs, individual pressure vessel (IPV), common pressure vessel (CPV), and a bipolar battery module were studied. Weight, system complexity and cost were compared for a satellite operating in a 6 hour, 5600 nautical mile orbit. The required energy storage is 52 kWh. A 25% improvement in specific energy is observed by employing a bipolar battery versus a battery comprised of hundreds of IPV's. Further weight benefits are realized by the development of light weight technologies in the bipolar design

Topical cyclone rainfall characteristics as determined from a satellite passive microwave radiometer

Data from the Nimbus-5 Electrically Scanning Microwave Radiometer (ESMR-5) were used to calculate latent heat release and other rainfall parameters for over 70 satellite observations of 21 tropical cyclones in the tropical North Pacific Ocean. The results indicate that the ESMR-5 measurements can be useful in determining the rainfall characteristics of these storms and appear to be potentially useful in monitoring as well as predicting their intensity. The ESMR-5 derived total tropical cyclone rainfall estimates agree favorably with previous estimates for both the disturbance and typhoon stages. The mean typhoon rainfall rate (1.9 mm h(-1)) is approximately twice that of disturbances (1.1 mm h(-1))

Thunderstorm vertical velocities and mass flux estimated from satellite data

Infrared geosynchronous satellite data with an interval of five minutes between images are used to estimate thunderstorm top ascent rates on two case study days. A mean vertical velocity of 3.5/ms for 19 clouds is calculated at a height of 8.7 km. This upward motion is representative of an area of approximately 10km on a side. Thunderstorm mass flux of approximately 2x10 to the 11th power/gs is calculated, which compares favorably with previous estimates. There is a significant difference in the mean calculated vertical velocity between elements associated with severe weather reports (w bar=4.6/ms) and those with no such reports (2.5/ms). Calculations were made using a velocity profile for an axially symmetric jet to estimate the peak updraft velocity. For the largest observed w value of 7.8/ms the calculation indicates a peak updraft of approximately 50/ms

Satellite-observed latent heat release in a tropical cyclone

Data from the Nimbus 5 electrically scanning microwave radiometer (ESMR) are used to make calculations of the latent heat release (L.H.R.) and the distribution of rainfall rate in a tropical cyclone as it grows from a tropical disturbance to a typhoon. The L.H.R. (calculated over a circular area of 4 deg latitude radius) increases during the development and intensification of the storm from a magnitude of 2.7 X 10 to the 21st power ergs/s (in the disturbance stage) to 8.8 X 10 to the 21st power ergs (typhoon stage). The latter value corresponds to a mean rainfall rate of 2.0 mm hr/s. The more intense the cyclone and the greater the L.H.R., the greater the percentage contribution of the larger rainfall rates to the L.H.R. In the disturbance stage the percentage contribution of rainfall rates less than or minus 6 mm hr/s is typically 8%; for the typhoon stage, the value is 38%. The distribution of rainfall rate as a function of radial distance from the center indicates that as the cyclone intensifies, the higher rainfall rates tend to concentrate toward the center of the circulation

Rossby waves and α\alpha-effect

Rossby waves drifting in the azimuthal direction are a common feature at the onset of thermal convective instability in a rapidly rotating spherical shell. They can also result from the destabilization of a Stewartson shear layer produced by differential rotation as expected in the liquid sodium experiment (DTS) working in Grenoble, France. A usual way to explain why Rossby waves can participate to the dynamo process goes back to Busse (1975). In his picture, the flow geometry is a cylindrical array of parallel rolls aligned with the rotation axis. The axial flow component (the component parallel to the rotation axis) is (i) maximum in the middle of each roll and changes its sign from one roll to the next. It is produced by the Ekman pumping at the fluid containing shell boundary. The corresponding dynamo mechanism can be explained in terms of an $\alpha$-tensor with non-zero coefficients on the diagonal. In rapidly rotating objects like the Earth's core (or in a fast rotating experiment), Rossby waves occur in the limit of small Ekman number ($\approx 10^{-15}$). In that case, the main source of the axial flow component is not the Ekman pumping but rather the ``geometrical slope effect'' due to the spherical shape of the fluid containing shell. This implies that the axial flow component is (ii) maximum at the borders of the rolls and not at the centers. If assumed to be stationary, such rolls would lead to zero coefficients on the diagonal of the $\alpha$-tensor, making the dynamo probably less efficient if possible at all. Actually, the rolls are drifting as a wave, and we show that this drift implies non--zero coefficients on the diagonal of the $\alpha$-tensor. These new coefficients are in essence very different from the ones obtained in case (i) and cannot be interpreted in terms of the heuristic picture of Busse (1975)

Emission angle dependent pion interferometry at RHIC and beyond

We use hydrodynamics to generate freeze-out configurations for non-central heavy-ion collisions at present and future collider energies. Such collisions are known to produce strong elliptic flow. The accompanying space-time structure of the source at freeze-out is analyzed using pion interferometry. Between RHIC and LHC energies the source deformation in the transverse plane changes sign. This leaves characteristic signatures in the emission angle dependence of the HBT radii.Comment: Minor changes (some references and discussion added), accepted by Physics Letters