Liquid-Phase Deposition of CIS Thin Layers: Final Report, February 2003--July 2005

The goal of this project was to fabricate single-phase CIS (a-Cu-In-Se, stoichiometric composition: CuInSe2) thin films for photovoltaic applications from a liquid phase - a Cu-In-Se melt of appropriate composition. This approach of liquid-phase deposition (LPD) is based on the new phase diagram we have established for Cu-In-Se, the first complete equilibrium phase diagram of this system. The liquidus projection exhibits four composition fields in which the primary solid phase, i.e., the first solid material that forms on cooling down from an entirely liquid state, is a-CuInSe2. Remarkably, none of the four composition fields is anywhere near the stoichiometric composition (CuInSe2) of a-CuInSe2. The results demonstrate that the proposed technique is indeed capable of producing films with a particularly large grain size and a correspondingly low density of grain boundaries. To obtain films sufficiently thin for solar cell applications and with a sufficiently smooth surface, it is advantageous to employ a sliding boat mechanism. Future work on liquid-phase deposition of CIS should focus on the interaction between the melt and the substrate surface, the resulting CIS interfaces, the surface morphology of the LPD-grown films, and, of course, the electronic properties of the material

Neural activation differences in amputees during imitation of intact versus amputee movements

The mirror neuron system (MNS) has been attributed with increased activation in motor-related cortical areas upon viewing of another's actions. Recent work suggests that limb movements that are similar and dissimilar in appearance to that of the viewer equivalently activate the MNS. It is unclear if this result can be observed in the action encoding areas in amputees who use prosthetic devices. Intact subjects and upper extremity amputee prosthesis users were recruited to view video demonstrations of tools being used by an intact actor and a prosthetic device user. All subjects pantomimed the movements seen in the video while recording electroencephalography (EEG). Intact subjects showed equivalent left parietofrontal activity during imitation planning after watching the intact or prosthetic arm. Likewise, when prosthesis users imitated prosthesis demonstrations, typical left parietofrontal activation was observed. When prosthesis users imitated intact actors, an additional pattern was revealed which showed greater activity in right parietal and occipital regions that are associated with the mentalizing system. This change may be required for prosthesis users to plan imitation movements in which the limb states between the observed and the observer do not match. The finding that prosthesis users imitating other prosthesis users showed typical left parietofrontal activation suggests that these subjects engage normal planning related activity when they are able to imitate a limb matching their own. This result has significant implications on rehabilitation, as standard therapy involves training with an intact occupational therapist, which could necessitate atypical planning mechanisms in amputees when learning to use their prosthesis

Atomic configurations of dislocation core and twin boundaries in 3C-SiC studied by high-resolution electron microscopy

The defects in 3C-SiC film grown on (001) plane of Si substrate were studied using a 200 kV high-resolution electron microscope with point resolution of 0.2 nm. A posterior image processing technique, the image deconvolution, was utilized in combination with the image contrast analysis to distinguish atoms of Si from C distant from each other by 0.109 nm in the [110] projected image. The principle of the image processing technique utilized and the related image contrast theory is briefly presented. The procedures of transforming an experimental image that does not reflect the crystal structure intuitively into the structure map and of identifying Si and C atoms from the map are described. The atomic configurations for a 30 degrees partial dislocation and a microtwin have been derived at atomic level. It has been determined that the 30 degrees partial dislocation terminates in C atom and the segment of microtwin is sandwiched between two 180 degrees rotation twins. The corresponding stacking sequences are derived and atomic models are constructed according to the restored structure maps for both the 30 degrees partial dislocation and microtwin. Images were simulated based on the two models to affirm the above-mentioned results

Capillary filling with wall corrugations] Capillary filling in microchannels with wall corrugations: A comparative study of the Concus-Finn criterion by continuum, kinetic and atomistic approaches

We study the impact of wall corrugations in microchannels on the process of capillary filling by means of three broadly used methods - Computational Fluid Dynamics (CFD), Lattice-Boltzmann Equations (LBE) and Molecular Dynamics (MD). The numerical results of these approaches are compared and tested against the Concus-Finn (CF) criterion, which predicts pinning of the contact line at rectangular ridges perpendicular to flow for contact angles theta > 45. While for theta = 30, theta = 40 (no flow) and theta = 60 (flow) all methods are found to produce data consistent with the CF criterion, at theta = 50 the numerical experiments provide different results. Whilst pinning of the liquid front is observed both in the LB and CFD simulations, MD simulations show that molecular fluctuations allow front propagation even above the critical value predicted by the deterministic CF criterion, thereby introducing a sensitivity to the obstacle heigth.Comment: 25 pages, 8 figures, Langmuir in pres

Thin Polymer Brush Decouples Biomaterial's Micro-/Nano-Topology and Stem Cell Adhesion

Surface morphology and chemistry of polymers used as biomaterials, such as tissue engineering scaffolds, have a strong influence on the adhesion and behavior of human mesenchymal stem cells. Here we studied semicrystalline poly(ε-caprolactone) (PCL) substrate scaffolds, which exhibited a variation of surface morphologies and roughness originating from different spherulitic superstructures. Different substrates were obtained by varying the parameters of the thermal processing, i.e. crystallization conditions. The cells attached to these polymer substrates adopted different morphologies responding to variations in spherulite density and size. In order to decouple substrate topology effects on the cells, sub-100 nm bio-adhesive polymer brush coatings of oligo(ethylene glycol) methacrylates were grafted from PCL and functionalized with fibronectin. On surfaces featuring different surface textures, dense and sub-100 nm thick brush coatings determined the response of cells, irrespective to the underlying topology. Thus, polymer brushes decouple substrate micro-/nano-topology and the adhesion of stem cells

FIB patterning of stainless steel for the development of nano-structured stent surfaces for cardiovascular applications

Stent implantation is a percutaneous interventional procedure that mitigates vessel stenosis, providing mechanical support within the artery and as such a very valuable tool in the fight against coronary artery disease. However, stenting causes physical damage to the arterial wall. It is well accepted that a valuable route to reduce in-stent re-stenosis can be based on promoting cell response to nano-structured stainless steel (SS) surfaces such as by patterning nano-pits in SS. In this regard patterning by focused ion beam (FIB) milling offers several advantages for flexible prototyping. On the other hand FIB patterning of polycrystalline metals is greatly influenced by channelling effects and redeposition. Correlative microscopy methods present an opportunity to study such effects comprehensively and derive structure–property understanding that is important for developing improved patterning. In this chapter we present a FIB patterning protocol for nano-structuring features (concaves) ordered in rectangular arrays on pre-polished 316L stainless steel surfaces. An investigation based on correlative microscopy approach of the size, shape and depth of the developed arrays in relation to the crystal orientation of the underlying SS domains is presented. The correlative microscopy protocol is based on cross-correlation of top-view scanning electron microscopy, electron backscattering diffraction, atomic force microscopy and cross-sectional (serial) sectioning. Various FIB tests were performed, aiming at improved productivity by preserving nano-size accuracy of the patterned process. The optimal FIB patterning conditions for achieving reasonably high throughput (patterned rate of about 0.03 mm2/h) and nano-size accuracy in dimensions and shapes of the features are discussed as well

Thermal modelling of gas generation and retention in the Jurassic organic-rich intervals in the Darquain field, Abadan Plain, SW Iran

The petroleum system with Jurassic source rocks is an important part of the hydrocarbons discovered in the Middle East. Limited studies have been done on the Jurassic intervals in the 26,500 km2 Abadan Plain in south-west Iran, mainly due to the deep burial and a limited number of wells that reach the basal Jurassic successions. The goal of this study was to evaluate the Jurassic organic-rich intervals and shale gas play in the Darquain field using organic geochemistry, organic petrography, biomarker analysis, and basin modelling methods. This study showed that organic-rich zones present in the Jurassic intervals of Darquain field could be sources of conventional and unconventional gas reserves. The organic matter content of samples from the organic-rich zones corresponds to medium-to-high-sulphur kerogen Type II-S marine origin. The biomarker characteristics of organic-rich zones indicate carbonate source rocks that contain marine organic matter. The biomarker results also suggest a marine environment with reducing conditions for the source rocks. The constructed thermal model for four pseudo-wells indicates that, in the kitchen area of the Jurassic gas reserve, methane has been generated in the Sargelu and Neyriz source rocks from Early Cretaceous to recent times and the transformation ratio of organic matter is more than 97%. These organic-rich zones with high initial total organic carbon (TOC) are in the gas maturity stage [1.5–2.2% vitrinite reflectance in oil (Ro)] and could be good unconventional gas reserves and gas source rocks. The model also indicates that there is a huge quantity of retained gas within the Jurassic organic-rich intervals