Micromechanics of hemp strands in polypropylene composites

The present paper investigates micromechanics of hemp strands. The main objective of the present work has been the determination of the intrinsic strength of hemp strands. Hemp strands have been used as reinforcement of Polypropylene composites. Different percentages of hemp strands and coupling agents (MAPP) have been tested to obtain a map of the mechanical properties of that kind of composites and the effect of the components on the final properties. Mechanical properties of the different specimens have been tested using standard experimental methods and equipment. Micromechanics of the strands have been obtained using Hirsch model, Bowyer-Bader methodology and Kelly-Tyson model.Fil: Vallejos, María Evangelina. Universidad Nacional de Misiones; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Nordeste; ArgentinaFil: Espinach, F. X.. Universidad de Girona; EspañaFil: Julián, F.. Universidad de Girona; EspañaFil: Torres, L.. Universidad de Girona; EspañaFil: Vilaseca, F.. Universidad de Girona; EspañaFil: Mutjé. P.. Universidad de Girona; Españ

Flexural Properties and Mean Intrinsic Flexural Strength of Old Newspaper Reinforced Polypropylene Composites

Newspapers have a limited lifespan, and therefore represent a focus of used and disposed paper. While these refuses have a considerable value and can be easily recycled, a considerable fraction ends in landfill. The authors show the possibility of adding value to used newspaper and enlarge its value chain. Old newspaper incorporates a high amount of wood fibers able to be used as reinforcement. On the other hand, this material also incorporates inks and other components inherent to newspaper production. In this work, the authors disintegrate old newspaper to recover and individualize wood fibers. A morphological analysis showed that the recovered fibers had aspect ratios higher than 10, revealing, a priori, their strengthening capabilities. Thereupon, these fibers were compounded with polypropylene at different contents, ranging from 20% to 50% w/w. It is well known that wood fibers are hydrophilic, while polyolefin are hydrophobic. This is a drawback to obtaining strong interfaces. Thus, two sets of composites were produced, with and without a coupling agent. The results showed that uncoupled composites increased the flexural strength of the matrix but reached an equilibrium point from which adding more reinforcement did not changer the flexural strength. On the other hand, the coupled composites showed a linear increase of the flexural strength against the reinforcement content. The flexural moduli of the coupled and uncoupled composites were very similar and evolved linearly with the reinforcement content.This research was funded by the University of Girona

Research on the suitability of organosolv semi-chemical triticale fibers as reinforcement for recycled HDPE composites

The main objective of this research was to study the feasibility of incorporating organosolv semi-chemical triticale fibers as the reinforcing element in recycled high density polyethylene (HDPE). In the first step, triticale fibers were characterized in terms of chemical composition and compared with other biomass species (wheat, rye, softwood, and hardwood). Then, organosolv semi-chemical triticale fibers were prepared by the ethanolamine process. These fibers were characterized in terms of its yield, kappa number, fiber length/diameter ratio, fines, and viscosity; the obtained results were compared with those of eucalypt kraft pulp. In the second step, the prepared fibers were examined as a reinforcing element for recycled HDPE composites. Coupled and non-coupled HDPE composites were prepared and tested for tensile properties. Results showed that with the addition of the coupling agent maleated polyethylene (MAPE), the tensile properties of composites were significantly improved, as compared to non-coupled samples and the plain matrix. Furthermore, the influence of MAPE on the interfacial shear strength (IFSS) was studied. The contributions of both fibers and matrix to the composite strength were also studied. This was possible by the use of a numerical iterative method based on the Bowyer-Bader and Kelly-Tyson equations

Commercial fisheries in a mega unregulated floodplain river: assessment of the most favourable hydrological conditions for its preservation

This paper deals with the hydrological variability effects on the primary commercial fish species inhabiting the main channel and the floodplain of the large Paraná River in its middle reaches in Argentina. Analysing more than eight decades (1935–2016) of information on the most frequent and abundant commercial species in conjunction with hydrological levels and temperature, our results show that spring–summer floods of a certain magnitude (c. 6 m) and durations (> 80 days) are crucial for sustaining commercial fisheries. Moreover, the frequency of these floods was modulated by the decadal climatic fluctuations that have occurred over the past 100 years in the Paraná Basin. An insight into the probable incidence of some anthropogenic influences is also provided.Fil: Rabuffetti, Ana Pia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto Nacional de Limnología. Universidad Nacional del Litoral. Instituto Nacional de Limnología; ArgentinaFil: Espínola, Luis Alberto. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto Nacional de Limnología. Universidad Nacional del Litoral. Instituto Nacional de Limnología; ArgentinaFil: Abrial, Elie. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto Nacional de Limnología. Universidad Nacional del Litoral. Instituto Nacional de Limnología; ArgentinaFil: Amsler, Mario Luis. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto Nacional de Limnología. Universidad Nacional del Litoral. Instituto Nacional de Limnología; ArgentinaFil: Blettler, Martin Cesar Maria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto Nacional de Limnología. Universidad Nacional del Litoral. Instituto Nacional de Limnología; ArgentinaFil: Eurich, María Florencia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto Nacional de Limnología. Universidad Nacional del Litoral. Instituto Nacional de Limnología; ArgentinaFil: Eberle Folmer, Eliana Gisel. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Instituto Nacional de Limnología. Universidad Nacional del Litoral. Instituto Nacional de Limnología; Argentin

Estimation of the interfacial shears strength, orientation factor and mean equivalent intrinsic tensile strength in old newspaper fiber/polypropylene composites

The present paper investigates the suitability of old newspapers (ONPs) as a source of reinforcing fibers for composite materials. Different percentages of ONP fibers were compounded with polypropylene (PP). A coupling agent was added to the compound to improve the interface between matrix and reinforcing fibers. Tensile test were performed to obtain the mechanical properties of the composite materials. Micromechanics of the fibers were obtained using Hirsch model, Bowyer Bader methodology and Kelly-Tyson equations. Due to the presence of a percentage of calcium carbonate in the obtained fibers (10%), the computed intrinsic characteristics were addressed as equivalent. The most important results were the mean equivalent intrinsic tensile strength of the ONP fibers, the mean orientation angle and the mean interfacial shear strength. The contributions of the matrix, the subcritical and the supercritical fibers to the tensile strength of the composite material were also computed. (C) 2013 Elsevier Ltd. All rights reserved.Serrano, A.; Espinach, FX.; Julian, F.; Rey Tormos, RMD.; Mendez, JA.; Mutje, P. (2013). Estimation of the interfacial shears strength, orientation factor and mean equivalent intrinsic tensile strength in old newspaper fiber/polypropylene composites. Composites Part B: Engineering. 50:232-238. doi:10.1016/j.compositesb.2013.02.018S2322385