A comparative study of density functional and density functional tight binding calculations of defects in graphene

The density functional tight binding approach (DFTB) is well adapted for the study of point and line defects in graphene based systems. After briefly reviewing the use of DFTB in this area, we present a comparative study of defect structures, energies and dynamics between DFTB results obtained using the dftb+ code, and density functional results using the localised Gaussian orbital code, AIMPRO. DFTB accurately reproduces structures and energies for a range of point defect structures such as vacancies and Stone-Wales defects in graphene, as well as various unfunctionalised and hydroxylated graphene sheet edges. Migration barriers for the vacancy and Stone-Wales defect formation barriers are accurately reproduced using a nudged elastic band approach. Finally we explore the potential for dynamic defect simulations using DFTB, taking as an example electron irradiation damage in graphene

Graphene edge structures: Folding, scrolling, tubing, rippling and twisting

Conventional three-dimensional crystal lattices are terminated by surfaces, which can demonstrate complex rebonding and rehybridisation, localised strain and dislocation formation. Two dimensional crystal lattices, of which graphene is the archetype, are terminated by lines. The additional available dimension at such interfaces opens up a range of new topological interface possibilities. We show that graphene sheet edges can adopt a range of topological distortions depending on their nature. Rehybridisation, local bond reordering, chemical functionalisation with bulky, charged, or multi-functional groups can lead to edge buckling to relieve strain, folding, rolling and even tube formation. We discuss the topological possibilities at a 2D graphene edge, and under what circumstances we expect different edge topologies to occur. Density functional calculations are used to explore in more depth different graphene edge types.Comment: Additional figure in published versio

Bromination of Graphene and Graphite

We present a density functional theory study of low density bromination of graphene and graphite, finding significantly different behaviour in these two materials. On graphene we find a new Br2 form where the molecule sits perpendicular to the graphene sheet with an extremely strong molecular dipole. The resultant Br+-Br- has an empty pz-orbital located in the graphene electronic pi-cloud. Bromination opens a small (86meV) band gap and strongly dopes the graphene. In contrast, in graphite we find Br2 is most stable parallel to the carbon layers with a slightly weaker associated charge transfer and no molecular dipole. We identify a minimum stable Br2 concentration in graphite, finding low density bromination to be endothermic. Graphene may be a useful substrate for stabilising normally unstable transient molecular states

Behavior of hydrogen ions, atoms, and molecules in a-boron studied using density functional calculations

We examine the behavior of hydrogen ions, atoms, and molecules in a-boron using density functionalcalculations. Hydrogen behaves as a negative-U center, with positive H ions preferring to sit off-center oninterlayer bonds and negative H ions sitting preferably at in-plane sites between three B12 icosahedra. Hydrogen atoms inside B12 icosahedral cages are unstable, drifting off-center and leaving the cage with only a 0.09 eV barrier. While H0 is extremely mobile (diffusion barrier 0.25 eV), H+ and H- have higher diffusion barriers of 0.9 eV. Once mobile, these defects will combine, forming H2 in the interstitial void space, which will remain trapped in the lattice until high temperatures. Based on these results we discuss potential differences for hydrogen behavior in -boron and compare with experimental muon-implantation data

Mechanical properties of nanosheets and nanotubes investigated using a new geometry independent volume definition

Cross-sectional area and volume become difficult to define as material dimensions approach the atomic scale. This limits the transferability of macroscopic concepts such as Young's modulus. We propose a new volume definition where the enclosed nanosheet or nanotube average electron density matches that of the parent layered bulk material. We calculate the Young's moduli for various nanosheets (including graphene, BN and MoS2) and nanotubes. Further implications of this new volume definition such as a Fermi level dependent Young's modulus and out-of-plane Poisson's ratio are shown

Predicting experimentally stable allotropes: Instability of penta-graphene

International audienceIn recent years, a plethora of theoretical carbon allotropes have been proposed, none of which has been experimentally isolated. We discuss here criteria that should be met for a new phase to be potentially experimentally viable. We take as examples Haeckelites, 2D networks of sp2-carbon–containing pentagons and heptagons, and “penta-graphene,” consisting of a layer of pentagons constructed from a mixture of sp2- and sp3-coordinated carbon atoms. In 2D projection appearing as the “Cairo pattern,” penta-graphene is elegant and aesthetically pleasing. However, we dispute the author’s claims of its potential stability and experimental relevanc

Pyrene coating transition metal disulfides as protection from photooxidation and environmental aging

This article belongs to the Section Nanocomposite Materials.Environmental degradation of transition metal disulfides (TMDs) is a key stumbling block in a range of applications. We show that a simple one-pot non-covalent pyrene coating process protects TMDs from both photoinduced oxidation and environmental aging. Pyrene is immobilized non-covalently on the basal plane of exfoliated MoS2 and WS2. The optical properties of TMD/pyrene are assessed via electronic absorption and fluorescence emission spectroscopy. High-resolution scanning transmission electron microscopy coupled with electron energy loss spectroscopy confirms extensive pyrene surface coverage, with density functional theory calculations suggesting a strongly bound stable parallel-stacked pyrene coverage of ~2–3 layers on the TMD surfaces. Raman spectroscopy of exfoliated TMDs while irradiating at 0.9 mW/4 μm2 under ambient conditions shows new and strong Raman bands due to oxidized states of Mo and W. Yet remarkably, under the same exposure conditions TMD/pyrene remain unperturbed. The current findings demonstrate that pyrene physisorbed on MoS2 and WS2 acts as an environmental barrier, preventing oxidative surface reactions in the TMDs catalyzed by moisture, air, and assisted by laser irradiation. Raman spectroscopy confirms that the hybrid materials stored under ambient conditions for two years remained structurally unaltered, corroborating the beneficial role of pyrene for not only hindering oxidation but also inhibiting aging.This research was funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742, under the “Graphene Flagship” project grant agreement No 785219 and under the ESTEEM-3 project grant agreement No 823717. This research was also partially funded by the project “Advanced Materials and Devices” (MIS 5002409), which is implemented under the “Action for the Strategic Development on the Research and Technological Sector” funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–2020) and co-financed by Greece and the European Union (European Regional Development Fund). This work was supported by the COST Action CA15107 MultiComp. This research was also supported by the Spanish Ministerio de Economia y Competitividad (MAT2016-79776-P), from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014–2020 (grant number E13_17R).Peer reviewe

First-Principles Study of Substitutional Metal Impurities in Graphene: Structural, Electronic and Magnetic Properties

We present a theoretical study using density functional calculations of the structural, electronic and magnetic properties of 3d transition metal, noble metal and Zn atoms interacting with carbon monovacancies in graphene. We pay special attention to the electronic and magnetic properties of these substitutional impurities and found that they can be fully understood using a simple model based on the hybridization between the states of the metal atom, particularly the d shell, and the defect levels associated with an unreconstructed D3h carbon vacancy. We identify three different regimes associated with the occupation of different carbon-metal hybridized electronic levels: (i) bonding states are completely filled for Sc and Ti, and these impurities are non-magnetic; (ii) the non-bonding d shell is partially occupied for V, Cr and Mn and, correspondingly, these impurties present large and localized spin moments; (iii) antibonding states with increasing carbon character are progressively filled for Co, Ni, the noble metals and Zn. The spin moments of these impurities oscillate between 0 and 1 Bohr magnetons and are increasingly delocalized. The substitutional Zn suffers a Jahn-Teller-like distortion from the C3v symmetry and, as a consequence, has a zero spin moment. Fe occupies a distinct position at the border between regimes (ii) and (iii) and shows a more complex behavior: while is non-magnetic at the level of GGA calculations, its spin moment can be switched on using GGA+U calculations with moderate values of the U parameter.Comment: 13 figures, 4 tables. Submitted to Phys. Rev. B on September 26th, 200

Atomic Configuration of Nitrogen Doped Single-Walled Carbon Nanotubes

Having access to the chemical environment at the atomic level of a dopant in a nanostructure is crucial for the understanding of its properties. We have performed atomically-resolved electron energy-loss spectroscopy to detect individual nitrogen dopants in single-walled carbon nanotubes and compared with first principles calculations. We demonstrate that nitrogen doping occurs as single atoms in different bonding configurations: graphitic-like and pyrrolic-like substitutional nitrogen neighbouring local lattice distortion such as Stone-Thrower-Wales defects. The stability under the electron beam of these nanotubes has been studied in two extreme cases of nitrogen incorporation content and configuration. These findings provide key information for the applications of these nanostructures.Comment: 25 pages, 13 figure

Ripple edge engineering of graphene nanoribbons

It is now possible to produce graphene nanoribbons (GNRs) with atomically defined widths. GNRs offer many opportunities for electronic devices and composites, if it is possible to establish the link between edge structure and functionalisation, and resultant GNR properties. Switching hydrogen edge termination to larger more complex functional groups such as hydroxyls or thiols induces strain at the ribbon edge. However we show that this strain is then relieved via the formation of static out-of-plane ripples. The resultant ribbons have a significantly reduced Young's Modulus which varies as a function of ribbon width, modified band gaps, as well as heterogeneous chemical reactivity along the edge. Rather than being the exception, such static edge ripples are likely on the majority of functionalized graphene ribbon edges.Comment: Supplementary Materials availabl