Precursor concentration and substrate effects on high rate dip-coated vanadium oxide thin films.

Uniform thin films of vanadium pentoxide were dip-coated from a high-concentration vanadium oxytriisopropoxide precursor which is shown to be resistant to the dewetting processes which can form surface pinhole defects. Through appropriate withdrawal speed choice, the thin films have a smooth uniform surface morphology with a low rms roughness of <1 nm in both their amorphous and crystallized states. The structure of the thin films follows that of bulk vanadium pentoxide but in a nanostructured form. The deposition methods shown can be applied to prepare thin films upon a variety of different substrates and other alkoxide based metal oxide materials

Germanium oxide removal by citric acid and thiol passivation from citric acid terminated Ge(100)

Many applications of germanium (Ge) are underpinned by effective oxide removal and surface passivation. This important surface treatment step often requires H–X (X = Cl, Br, I) or HF etchants. Here, we show that aqueous citric acid solutions are effective in the removal of GeOx. The stability of citric acid-treated Ge(100) is compared to HF and HCl treated surfaces and analyzed by X-ray photoelectron spectroscopy. Further Ge surface passivation was investigated by thiolation using alkane monothiols and dithiols. The organic passivation layers show good stability with no oxide regrowth observed after 3 days of ambient exposure

Solution processable broadband transparent mixed metal oxide nanofilm optical coatings via substrate diffusion doping

Devices composed of transparent materials, particularly those utilizing metal oxides, are of significant interest due to increased demand from industry for higher fidelity transparent thin film transistors, photovoltaics and a myriad of other optoelectronic devices and optics that require more cost-effective and simplified processing techniques for functional oxides and coatings. Here, we report a facile solution processed technique for the formation of a transparent thin film through an inter-diffusion process involving substrate dopant species at a range of low annealing temperatures compatible with processing conditions required by many state-of-the-art devices. The inter-diffusion process facilitates the movement of Si, Na and O species from the substrate into the as-deposited vanadium oxide thin film forming a composite fully transparent V0.0352O0.547Si0.4078Na0.01. Thin film X-ray diffraction and Raman scattering spectroscopy show the crystalline component of the structure to be [small alpha]-NaVO3 within a glassy matrix. This optical coating exhibits high broadband transparency, exceeding 90-97% absolute transmission across the UV-to-NIR spectral range, while having low roughness and free of surface defects and pinholes. The production of transparent films for advanced optoelectronic devices, optical coatings, and low- or high-k oxides is important for planar or complex shaped optics or surfaces. It provides opportunities for doping metal oxides to ternary, quaternary or other mixed metal oxides on glass, encapsulants or other substrates that facilitate diffusional movement of dopant species

Combined Pulsed RF GD-OES and HAXPES for Quantified Depth Profiling through Coatings

From MDPI via Jisc Publications RouterHistory: accepted 2021-06-07, pub-electronic 2021-06-11Publication status: PublishedFunder: Henry Royce Institute; Grant(s): EP/R00661X/1, EP/P025021/1, EP/P025498/1Chemical characterization at buried interfaces is a real challenge, as the physico-chemical processes operating at the interface govern the properties of many systems and devices. We have developed a methodology based on the combined use of pulsed RF GD-OES (pulsed Radio Frequency Glow Discharge Optical Emission Spectrometry) and XPS (X-ray Photoelectron Spectroscopy) to facilitate the access to deeply buried locations (taking advantage of the high profiling rate of the GD-OES) and perform an accurate chemical diagnosis using XPS directly inside the GD crater. The reliability of the chemical information is, however, influenced by a perturbed layer present at the surface of the crater, hindering traditional XPS examination due to a relatively short sampling depth. Sampling below the perturbed layer may, however, can be achieved using a higher energy excitation source with an increased sampling depth, and is enabled here by a new laboratory-based HAXPES (Hard X-ray PhotoElectron Spectroscopy) (Ga-Kα, 9.25 keV). This new approach combining HAXPES with pulsed RF GD-OES requires benchmarking and is here demonstrated and evaluated on InP. The perturbed depth is estimated and the consistency of the chemical information measured is demonstrated, offering a new route for advanced chemical depth profiling through coatings and heterostructures

Peptide immobilisation on porous silicon surface for metal ions detection

In this work, a Glycyl-Histidyl-Glycyl-Histidine (GlyHisGlyHis) peptide is covalently anchored to the porous silicon PSi surface using a multi-step reaction scheme compatible with the mild conditions required for preserving the probe activity. In a first step, alkene precursors are grafted onto the hydrogenated PSi surface using the hydrosilylation route, allowing for the formation of a carboxyl-terminated monolayer which is activated by reaction with N-hydroxysuccinimide in the presence of a peptide-coupling carbodiimide N-ethyl-N'-(3-dimethylaminopropyl)-carbodiimide and subsequently reacted with the amino linker of the peptide to form a covalent amide bond. Infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy are used to investigate the different steps of functionalization

3. L’eau pure

« Eau : liquide incolore, inodore, transparent et insipide lorsqu’il est pur », c’est ainsi que le dictionnaire décrit ce constituant chimique essentiel. Les mots de cette définition, issus de simples constats, renferment des questionnements scientifiques majeurs quant aux propriétés observées, que l’humanité s’est évertuée à résoudre au fil de son histoire. Il est aussi intéressant de remarquer que le terme liquide est prédominant, voire exclusif, dans la représentation de l’eau et que le qu..