Analysis of the performance of tapered semiconductor optical amplifiers: role of the taper angle

The beam properties of tapered semiconductor optical amplifiers emitting at 1.57 μm are analyzed by means of simulations with a self-consistent steady state electro-optical and thermal simulator. The results indicate that the self-focusing caused by carrier lensing is delayed to higher currents for devices with taper angle slightly higher than the free diffraction angle

Temporally flat top pulse generation from gain switched semiconductor lasers based on a polarization interferometer with variable transfer function

We propose the use of a polarization based interferometer with variable transfer function for the generation of temporally flat top pulses from gain switched single mode semiconductor lasers. The main advantage of the presented technique is its flexibility in terms of input pulse characteristics, as pulse duration, spectral bandwidth and operating wavelength. Theoretical predictions and experimental demonstrations are presented and the proposed technique is applied to two different semiconductor laser sources emitting in the 1550 nm region. Flat top pulses are successfully obtained with input seed pulses with duration ranging from 40 ps to 100 ps

Generación de pulsos ópticos a 1,5 μm mediante computación de ganancia en láseres de cavidad vertical

Optical pulses with duration below 60 ps were generated by gain-switching a Vertical Cavity Surface Emitting Laser (VCSEL) at 1535 nm. We used a radio frequency (RF) sinusoidal signal to modulate the device near threshold. Relaxation oscillations or pulse train generation were observed depending on the gain switching conditions. Repetition rates between 100 MHz and 2 GHz were tested. The dependence of the pulse width and amplitude was investigated in relation with the bias current and excitation frequency and amplitude. The optimal configuration of the current bias and RF modulating signal provided the shortest pulse duration of 57 ps at repetition rate of 800 MH

Estimación del error en la medida del factor de ensanchamiento de línea en láseres de semiconductor

En el presente trabajo se propone un método para la medida y la estimación del error de la misma en la caracterización del factor de ensanchamiento de línea (parámetro α) de los láseres de semiconductor. La técnica propuesta se basa en el cálculo del parámetro α a partir de la medida de la intensidad y de la frecuencia instantánea de los pulsos generados por un laser de semiconductor conmutado en ganancia. El error de medida se estima mediante la comparación entre el espectro medido y el reconstruido utilizando los perfiles temporales de amplitud y fase de los pulsos generados. El método se ha aplicado a un laser DFB, obteniendo un error de medida menor del 5 %

Web based interactive educational software introducing semiconductor laser dynamics: Sound Of Lasers (SOL)

In this work, educational software for intuitive understanding of the basic dynamic processes of semiconductor lasers is presented. The proposed tool is addressed to the students of optical communication courses, encouraging self consolidation of the subjects learned in lectures. The semiconductor laser model is based on the well known rate equations for the carrier density, photon density and optical phase. The direct modulation of the laser is considered with input parameters which can be selected by the user. Different options for the waveform, amplitude and frequency of thpoint. Simulation results are plotted for carrier density and output power versus time. Instantaneous frequency variations of the laser output are numerically shifted to the audible frequency range and sent to the computer loudspeakers. This results in an intuitive description of the “chirp” phenomenon due to amplitude-phase coupling, typical of directly modulated semiconductor lasers. In this way, the student can actually listen to the time resolved spectral content of the laser output. By changing the laser parameters and/or the modulation parameters,consequent variation of the laser output can be appreciated in intuitive manner. The proposed educational tool has been previously implemented by the same authors with locally executable software. In the present manuscript, we extend our previous work to a web based platform, offering improved distribution and allowing its use to the wide audience of the web

Sound of lasers (SOL) - An audiovisual approach to semiconductor laser dynamics

We present an educational software addressed to the students of optical communication courses, for a simple visualization of the basic dynamic processes of semiconductor lasers. The graphic interface allows the user to choose the laser and the modulation parameters and it plots the laser power output and instantaneous frequency versus time. Additionally, the optical frequency variations are numerically shifted into the audible frequency range in order to produce a sound wave from the computer loudspeakers. Using the proposed software, the student can simultaneously see and hear how the laser intensity and frequency change, depending on the modulation and device parameters

Characterization of Gain-Switched Pulses from 1.55 µm VCSEL

We report on short optical pulse generation by gain-switching (GS) a low-cost commercial vertical-cavity surface-emitting laser emitting at 1.55 μm. The dependence of pulse characteristics on GS parameters is investigated and analyzed. Pulses with duration of 55 ps and time-bandwidth product between 0.91 and 2.2 are obtained at repetition rates between 1 and 3 GHz

Microwave signal generation using a dual-beam optically injected 1550 nm VCSEL

We report microwave signal generation using a 1550 nm single-mode VCSEL subject to two-frequency optical injection. Double injection locking is achieved. It is found that this generation system is independent of the master lasers polarization

Emission characteristics of a 1.5-mu m all-semiconductor tapered master oscillator power amplifier

We present experimental results on the emission characteristics of a 1.5-_m distributed feedback (DFB) tapered master oscillator power amplifier (MOPA) in a wide range of steady-state injection conditions, showing different dynamical behaviors. A detailed analysis of the optical and radio-frequency spectra has allowed the identification of three different emission regimes: i) stable amplified DFB emission, but with wavelength jumps when sweeping the injection currents; ii) multimode Fabry–Perot (FP) operation of the complete MOPA cavity; and iii) self-pulsed operation at frequencies between 5 and 8 GHz. The quasi-periodic occurrence of these emission regimes as a function of the injected currents is interpreted in terms of a thermally tuned competition between the modes of the master oscillator and the compound cavity modes. The physical origin of the wavelength jumps and of the alternation between regimes is discusse

Evaluation of 2.1µm DFB lasers for space applications

This paper presents the results obtained in the frame of an ESA-funded project called “Screening and Preevaluation of Shortwave Infrared Laser Diode for Space Application” with the objective of verifying the maturity of state of the art SWIR DFB lasers at 2.1µm to be used for space applications (mainly based on the occultation measurement principle and spectroscopy). The paper focus on the functional and environmental evaluation test plan. It includes high precision characterization, mechanical test (vibration and SRS shocks), thermal cycling, gamma and proton radiation tests, life test and some details of the Destructive Physical Analysis performed. The electro-optical characterization includes measurements of the tuning capabilities of the laser both by current and by temperature, the wavelength stability and the optical power versus laser current