Key Parameters Controlling the Performance of Catalytic Motors

The development of autonomous micro/nanomotors driven by self-generated chemical gradients is a topic of high interest given their potential impact in medicine and environmental remediation. Although impressive functionalities of these devices have been demonstrated, a detailed understanding of the propulsion mechanism is still lacking. In this work, we perform a comprehensive numerical analysis of the key parameters governing the actuation of bimetallic catalytic micropumps. We show that the fluid motion is driven by self-generated electro-osmosis where the electric field originates by a proton current rather than by a lateral charge asymmetry inside the double layer. Hence, the surface potential and the electric field are the key parameters for setting the pumping strength and directionality. The proton flux that generates the electric field stems from the proton gradient induced by the electrochemical reactions taken place at the pump. Surprisingly the electric field and consequently the fluid flow are mainly controlled by the ionic strength and not by the conductivity of the solution, as one could have expected. We have also analyzed the influence of the chemical fuel concentration, electrochemical reaction rates, and size of the metallic structures for an optimized pump performance. Our findings cast light on the complex chemomechanical actuation of catalytic motors and provide important clues for the search, design, and optimization of novel catalytic actuators

Imaging the Proton Concentration and Mapping the Spatial Distribution of the Electric Field of Catalytic Micropumps

Catalytic engines can use hydrogen peroxide as a chemical fuel in order to drive motion at the microscale. The chemo-mechanical actuation is a complex mechanism based on the interrelation between catalytic reactions and electro-hydrodynamics phenomena. We studied catalytic micropumps using fluorescence confocal microscopy to image the concentration of protons in the liquid. In addition, we measured the motion of particles with different charges in order to map the spatial distributions of the electric field, the electrostatic potential and the fluid flow. The combination of these two techniques allows us to contrast the gradient of the concentration of protons against the spatial variation in the electric field. We present numerical simulations that reproduce the experimental results. Our work sheds light on the interrelation between the different processes at work in the chemomechanical actuation of catalytic pumps. Our experimental approach could be used to study other electrochemical systems with heterogeneous electrodes

Wireless pulsed nanophotoelectrochemical cell for the ultrafast degradation of organic pollutants

An urgent demand exists for advanced-technologies to efficiently remove persistent organic pollutants from water, while minimizing energy consumption. Here, we introduce an innovative wireless nanophotoelectrochemical (nPEC) cell using pulsed light for the ultrafast degradation/mineralization of organic pollutants. The nPEC cell comprises a nanostructured Si-pn photodiode that monolithically integrates: (i) a Si-n/Au nanowire-based-photocathode for effective light absorption and photovoltage generation, and (ii) a Si-p/mesoporous-NiPt photoanode serving as catalyst to wirelessly amplify the sulfate radical production by low-intensity light without any bias voltage. The efficacy of the nPEC cell was shown by ultrafast degradation (>99 %) and mineralization (>98 %) of three emerging pollutants (tetracycline, levofloxacin and anatoxin-A). Notably, reaction kinetics were boosted by more than one order of magnitude when exposed to light intensities ca. 5-fold lower than sunlight. Remarkably, pulsed light beams in the 100–500 Hz range provided an additional enhancement in the degradation/mineralization efficiencies, reducing energy-input by half, while enhancing the catalyst's oxidation state and durability

Imaging the Proton Concentration and Mapping the Spatial Distribution of the Electric Field of Catalytic Micropumps

Catalytic engines can use hydrogen peroxide as a chemical fuel in order to drive motion at the microscale. The chemo-mechanical actuation is a complex mechanism based on the interrelation between catalytic reactions and electro-hydrodynamics phenomena. We studied catalytic micropumps using fluorescence confocal microscopy to image the concentration of protons in the liquid. In addition, we measured the motion of particles with different charges in order to map the spatial distributions of the electric field, the electrostatic potential and the fluid flow. The combination of these two techniques allows us to contrast the gradient of the concentration of protons against the spatial variation in the electric field. We present numerical simulations that reproduce the experimental results. Our work sheds light on the interrelation between the different processes at work in the chemomechanical actuation of catalytic pumps. Our experimental approach could be used to study other electrochemical systems with heterogeneous electrodes

From radial to unidirectional water pumping in zeta-potential modulated Nafion nanostructures.

Chemically propelled micropumps are promising wireless systems to autonomously drive fluid flows for many applications. However, many of these systems are activated by nocuous chemical fuels, cannot operate at high salt concentrations, or have difficulty for controlling flow directionality. In this work we report on a self-driven polymer micropump fueled by salt which can trigger both radial and unidirectional fluid flows. The micropump is based on the cation-exchanger Nafion, which produces chemical gradients and local electric fields capable to trigger interfacial electroosmotic flows. Unidirectional pumping is predicted by simulations and achieved experimentally by nanostructuring Nafion into microarrays with a fine tune modulation of surrounding surface zeta potentials. Nafion micropumps work in a wide range of salt concentrations, are reusable, and can be fueled by different salt cations. We demonstrate that they work with the common water-contaminant cadmium, using the own capture of this ion as fuel to drive fluid pumping. Thus, this system has potential for efficient and fast water purification strategies for environmental remediation. Unidirectional Nafion pumps also hold promise for effective analyte delivery or preconcentration for (bio)sensing assays