2,628 research outputs found

    Emission line models for the lowest-mass core collapse supernovae. I: Case study of a 9 M⊙M_\odot one-dimensional neutrino-driven explosion

    Full text link
    A large fraction of core-collapse supernovae (CCSNe), 30-50%, are expected to originate from the low-mass end of progenitors with MZAMS =8−12 M⊙M_{\rm ZAMS}~= 8-12~M_\odot. However, degeneracy effects make stellar evolution modelling of such stars challenging, and few predictions for their supernova light curves and spectra have been presented. Here we calculate synthetic nebular spectra of a 9 M⊙M_\odot Fe CCSN model exploded with the neutrino mechanism. The model predicts emission lines with FWHM∼\sim1000 km/s, including signatures from each deep layer in the metal core. We compare this model to observations of the three subluminous IIP SNe with published nebular spectra; SN 1997D, SN 2005cs, and SN 2008bk. The prediction of both line profiles and luminosities are in good agreement with SN 1997D and SN 2008bk. The close fit of a model with no tuning parameters provides strong evidence for an association of these objects with low-mass Fe CCSNe. For SN 2005cs, the interpretation is less clear, as the observational coverage ended before key diagnostic lines from the core had emerged. We perform a parameterised study of the amount of explosively made stable nickel, and find that none of these three SNe show the high 58^{58}Ni/56^{56}Ni ratio predicted by current models of electron capture SNe (ECSNe) and ECSN-like explosions. Combined with clear detection of lines from O and He shell material, these SNe rather originate from Fe core progenitors. We argue that the outcome of self-consistent explosion simulations of low-mass stars, which gives fits to many key observables, strongly suggests that the class of subluminous Type IIP SNe is the observational counterpart of the lowest mass CCSNe.Comment: Resubmitted to MNRAS after referee comment

    The Adsorption of Atomic Nitrogen on Ru(0001): Geometry and Energetics

    Full text link
    The local adsorption geometries of the (2x2)-N and the (sqrt(3)x sqrt(3))R30^o -N phases on the Ru(0001) surface are determined by analyzing low-energy electron diffraction (LEED) intensity data. For both phases, nitrogen occupies the threefold hcp site. The nitrogen sinks deeply into the top Ru layer resulting in a N-Ru interlayer distance of 1.05 AA and 1.10 AA in the (2x2) and the (sqrt(3)x sqrt(3))R30^o unit cell, respectively. This result is attributed to a strong N binding to the Ru surface (Ru--N bond length = 1.93 AA) in both phases as also evidenced by ab-initio calculations which revealed binding energies of 5.82 eV and 5.59 eV, respectively.Comment: 17 pages, 5 figures. Submitted to Chem. Phys. Lett. (October 10, 1996

    Sewer inspection and comparison of acoustic and CCTV methods

    Get PDF
    In the UK, the majority of sewer pipe inspections are carried out using closed-circuit television (CCTV) technology. This inspection technology is expensive; given the size of the UK sewer network, this means that only a small sample of network is inspected regularly. Up-to-date condition information on individual sewers is required to minimise sewer network operation failures and, ultimately, to eliminate flooding. There is therefore a need for a quicker and cheaper inspection method. This paper reports on a novel low-cost acoustic sensor system that can be used for the rapid detection of various defects in sewer pipes. It is shown that a large number of pipe defects can be classified and validated against CCTV images by way of visual examination of the acoustical data presented in the form of spectrograms. An overview of the technological principles used by the acoustic inspection method is presented in this paper together with the results of field trial surveys. The new method was tested in operational sewers in Austria and the acoustic inspection results compared with available CCTV reports: 79% of the defects identified by CCTV were also detected using the acoustic technique

    Three-dimensional Models of Core-collapse Supernovae From Low-mass Progenitors With Implications for Crab

    Get PDF
    We present 3D full-sphere supernova simulations of non-rotating low-mass (~9 Msun) progenitors, covering the entire evolution from core collapse through bounce and shock revival, through shock breakout from the stellar surface, until fallback is completed several days later. We obtain low-energy explosions [~(0.5-1.0)x 10^{50} erg] of iron-core progenitors at the low-mass end of the core-collapse supernova (LMCCSN) domain and compare to a super-AGB (sAGB) progenitor with an oxygen-neon-magnesium core that collapses and explodes as electron-capture supernova (ECSN). The onset of the explosion in the LMCCSN models is modelled self-consistently using the Vertex-Prometheus code, whereas the ECSN explosion is modelled using parametric neutrino transport in the Prometheus-HOTB code, choosing different explosion energies in the range of previous self-consistent models. The sAGB and LMCCSN progenitors that share structural similarities have almost spherical explosions with little metal mixing into the hydrogen envelope. A LMCCSN with less 2nd dredge-up results in a highly asymmetric explosion. It shows efficient mixing and dramatic shock deceleration in the extended hydrogen envelope. Both properties allow fast nickel plumes to catch up with the shock, leading to extreme shock deformation and aspherical shock breakout. Fallback masses of <~5x10^{-3} Msun have no significant effects on the neutron star (NS) masses and kicks. The anisotropic fallback carries considerable angular momentum, however, and determines the spin of the newly-born NS. The LMCCSNe model with less 2nd dredge-up results in a hydrodynamic and neutrino-induced NS kick of >40 km/s and a NS spin period of ~30 ms, both not largely different from those of the Crab pulsar at birth.Comment: 47 pages, 27 figures, 6 tables; minor revisions, accepted by MNRA

    {\it Ab initio} 27Al^{27}Al NMR chemical shifts and quadrupolar parameters for Al2O3Al_2O_3 phases and their precursors

    Full text link
    The Gauge-Including Projector Augmented Wave (GIPAW) method, within the Density Functional Theory (DFT) Generalized Gradient Approximation (GGA) framework, is applied to compute solid state NMR parameters for 27Al^{27}Al in the α\alpha, θ\theta, and κ\kappa aluminium oxide phases and their gibbsite and boehmite precursors. The results for well-established crystalline phases compare very well with available experimental data and provide confidence in the accuracy of the method. For γ\gamma-alumina, four structural models proposed in the literature are discussed in terms of their ability to reproduce the experimental spectra also reported in the literature. Among the considered models, the Fd3ˉmFd\bar{3}m structure proposed by Paglia {\it et al.} [Phys. Rev. B {\bf 71}, 224115 (2005)] shows the best agreement. We attempt to link the theoretical NMR parameters to the local geometry. Chemical shifts depend on coordination number but no further correlation is found with geometrical parameters. Instead our calculations reveal that, within a given coordination number, a linear correlation exists between chemical shifts and Born effective charges

    Chemical efficiency of reactive microflows with heterogeneus catalysis: a lattice Boltzmann study

    Get PDF
    We investigate the effects of geometrical micro-irregularities on the conversion efficiency of reactive flows in narrow channels of millimetric size. Three-dimensional simulations, based upon a Lattice-Boltzmann-Lax-Wendroff code, indicate that periodic micro-barriers may have an appreciable effect on the effective reaction efficiency of the device. Once extrapolated to macroscopic scales, these effects can result in a sizeable increase of the overall reaction efficiency.Comment: 12 pages, 12 figure

    Progress in automatic structure refinement with LEED

    Get PDF

    The catalytic reduction of NO by H-2 on Ru(0001): Observation of NHads species

    Get PDF
    Adsorption of NO and the reaction between NO and H-2 were investigated on the Ru(0001) surface by X-ray photoelectron spectroscopy (XPS). Surface composition was measured after NO adsorption and after the selective catalytic reduction of nitric oxide with hydrogen in steady-state conditions at 320 K and 390 K in a 30:1 mixture of H-2 and NO (total pressure = 10(-4) mbar). After steady-state NO reduction, molecularly adsorbed NO in both the linear on-top and threefold coordinations, NHads and N-ads species were identified by XPS. The coverage of the NHads and N-ads species was higher after the reaction at 390 K than the corresponding values at 320 K Strong destabilisation of N-ads by O-ads was detected. A possible reaction mechanism is discussed. (c) 2005 Elsevier B.V. All rights reserved

    Exoelectron emission during oxidation of Cs films

    Get PDF
    During oxidation of thin Cs films, a nonadiabatic surface reaction manifests itself in the emission of electrons. This effect was investigated in detail by combining measurements of the current and of energy distributions of these exoelectrons with studies on the electronic properties of the surface by means of ultraviolet photoelectron spectroscopy and metastable deexcitation spectroscopy. Exoelectron emission occurs via Auger deexcitation of the empty state derived from the O2 affinity level. This process is confined to the stage Cs2O2→CsO2 in which resonance ionization of the affinity level of the impinging O2 molecule upon crossing the Fermi level EF is efficiently suppressed due to the absence of metallic states near EF. A kinetic model based on the successive steps involved in the oxidation of Cs is developed which describes qualitatively well all the experimental findings

    Singlet-to-triplet conversion of metastable He atoms at alkali-metal overlayers

    Get PDF
    Energy distributions of electrons emitted from alkali-metal surfaces by impact of metastable He atoms reveal that there is a high probability for transformation of singlet atoms (excitation energy E*=20.6 eV) into triplet atoms (E*=19.8 eV) prior to deexcitation into the ground state. The conversion probability (as expressed by the ratio R of the intensities of valence-band emission due to triplet and singlet He* deexcitation, respectively) increases with increasing alkali-metal coverage on a Ru(0001) substrate, and in turn decreases with increasing oxygen exposure at a fixed alkali coverage. These findings indicate that R is a qualitative measure for the degree of ‘‘metallization’’ of the adlayer. R also increases with temperature due to broadening of the nearest-neighbor distribution whereby, on the average, a larger part of the adlayer becomes metalliclike. For Cs overlayers exhibiting work functions *− (1s12s2) formation as reflected by the R data as well as by the widths of the electron spectra
    • …
    corecore