60 research outputs found
EXPERIMENTAL EVALUATION OF INTRAORAL SCANNERS IN EDENTULOUS MANDIBLES
Aim: the main difficulties for intraoral scanners (IOS) are found in
the edentulous mandibles. The reduced bucco-lingual surface, the
limited height of the bone crest and the mobility of the soft tissues
generate criticalities for the acquisition of the digital impression.
The purpose of this study is to evaluate the comparison between
digital and analog impressions in these particular conditions.
Methods: two scans were obtained for the 11 subjects. The first
intraoral scan was carried out with intraoral scan (Omnicam
DentsplySirona) and the second was acquired by digitizing a plaster
model, obtained from an impression taken with an analogue
method, the best choice in these cases. All scans were converted
to standard tessellation language (STL). The STL files obtained for
each patient were superimposed by means of the GEOMAGIC
Control X software, to evaluate the comparison.
The average distance values obtained through the Geomagic
3D software constitute our primary outcome measure. 1 sample
t-test was used to prove the hypothesis that the average
distances of the points obtained between the two files are relevant
(α = .05).
Results: concerning the scans ability to reproduce the analog
impression the intraoral scans carried out with a intraoral scan
generated files with single measurements in terms of minimal
distance between objects far from scans obtained with analogue
methods (t =-7.29, P < .001).
Conclusion: regarding the results obtained, it was possible to
conclude that the STL files deriving from digital impressions
are significantly different from those deriving from analog impressions,
highlighting a difference between the two methods
The influence of custom-milled framework design for an implant-supported full-arch fixed dental prosthesis: 3D-FEA sudy
The current study aimed to evaluate the mechanical behavior of two different maxillary prosthetic rehabilitations according to the framework design using the Finite Element Analysis. An implant-supported full-arch fixed dental prosthesis was developed using a modeling software. Two conditions were modeled: a conventional casted framework and an experimental prosthesis with customized milled framework. The geometries of bone, prostheses, implants and abutments were modeled. The mechanical properties and friction coefficient for each isotropic and homogeneous material were simulated. A load of 100 N load was applied on the external surface of the prosthesis at 30° and the results were analyzed in terms of von Mises stress, microstrains and displacements. In the experimental design, a decrease of prosthesis displacement, bone strain and stresses in the metallic structures was observed, except for the abutment screw that showed a stress increase of 19.01%. The conventional design exhibited the highest stress values located on the prosthesis framework (29.65 MPa) between the anterior implants, in comparison with the experimental design (13.27 MPa in the same region). An alternative design of a stronger framework with lower stress concentration was reported. The current study represents an important step in the design and analysis of implant-supported full-arch fixed dental prosthesis with limited occlusal vertical dimension
Multiparameter toxicity assessment of novel DOPO-derived organophosphorus flame retardants
Halogen-free organophosphorus flame retardants are considered as replacements for the phased-out class of polybrominated diphenyl ethers (PBDEs). However, toxicological information on new flame retardants is still limited. Based on their excellent flame retardation potential, we have selected three novel 9,10- dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) derivatives and assessed their toxicological profile using a battery of in vitro test systems in order to provide toxicological information before their large-scale production and use. PBDE-99, applied as a reference compound, exhibited distinct neuroselective cytotoxicity at concentrations ≥10 μM. 6-(2-((6-Oxidodibenzo[1,2]oxaphosphinin-6-yl)amino)ethoxydibenzo[1,2]oxaphosphinine-6-oxide) (ETA-DOPO) and 6,6′-(ethane-1,2-diylbis(oxy))bis(dibenzo[1,2]oxaphosphinine-6-oxide) (EG-DOPO) displayed adverse effects at concentrations >10 μM in test systems reflecting the properties of human central and peripheral nervous system neurons, as well as in a set of non-neuronal cell types. DOPO and its derivative 6,6′-(ethane-1,2-diylbis(azanediyl))bis(6H-dibenzo[1,2]oxaphosphine-6-oxide) (EDA-DOPO) were neither neurotoxic, nor did they exhibit an influence on neural crest cell migration, or on the integrity of human skin equivalents.The two compounds furthermore displayed no inflammatory activation potential, nor did they affect algae growth or daphnia viability at concentrations ≤400 μM. Based on the superior flame retardation properties,biophysical features suited for use in polyurethane foams, and low cytotoxicity of EDA-DOPO, our results suggest that it is a candidate for the replacement of currently applied flame retardants
- …