High-Tech Kit—The set of advanced activities from the MOSEM project

One of the most tangible outcomes of the MOSEM (Minds-On experimental equipment kits in Superconductivity and ElectroMagnetism for the continuing vocational training of upper secondary school physics teachers—LLPLdV-TOI-2007-NO/165.009) project is the set of advanced experiments—High-Tech Kit (HTK). The Kit contains the experiments, prototyped and tested among the project partners’ schools and teacher training institutions. The activities are combined with e-modules comprising videos, animations, and modeling as well as with new support material for teachers and teacher seminars. The paper briefly shows some of the HTK materials as appropriate use of real and virtual multimedia in physics teaching and learning. The authors discuss the process of setting up same of the experiments and illustrate activities with the results of measurements obtained within

Multi-material additive manufacture and microwave-assisted sintering of a metal/ceramic metamaterial antenna structure

Multi-material metal/ceramic 3D structures comprising of metallic silver and ultra-low sintering temperature silver molybdenum oxide ceramics, have been additively manufactured and hybrid densified using microwave-assisted sintering for the first time. Optimum densification conditions at 440 °C / 1 h, resulted in relative permittivity, εr = 10.99 ± 0.04, dielectric losses, tanδ = 0.005 ± 0.001 and microwave quality factor, Q × f = 2597 ± 540 GHz. Applying 2 kW microwave energy at 2.45 GHz for 60 min, was proven sufficient, to densify the metallic Ag infilling electrodes, without causing any macroscopic defects. A fully functional multi-layered antenna structure with a metamaterial artificial magnetic conductor was designed, dual-printed and densified, to showcase the potential of combining multi-material additive manufacturing with microwave-assisted sintering

Quantitative Flow Ratio to Predict Nontarget Vessel-Related Events at 5 Years in Patients With ST-Segment-Elevation Myocardial Infarction Undergoing Angiography-Guided Revascularization.

Background In ST-segment-elevation myocardial infarction, angiography-based complete revascularization is superior to culprit-lesion-only percutaneous coronary intervention. Quantitative flow ratio (QFR) is a novel, noninvasive, vasodilator-free method used to assess the hemodynamic significance of coronary stenoses. We aimed to investigate the incremental value of QFR over angiography in nonculprit lesions in patients with ST-segment-elevation myocardial infarction undergoing angiography-guided complete revascularization. Methods and Results This was a retrospective post hoc QFR analysis of untreated nontarget vessels (any degree of diameter stenosis [DS]) from the randomized multicenter COMFORTABLE AMI (Comparison of Biolimus Eluted From an Erodible Stent Coating With Bare Metal Stents in Acute ST-Elevation Myocardial Infarction) trial by assessors blinded for clinical outcomes. The primary end point was cardiac death, spontaneous nontarget vessel myocardial infarction, and clinically indicated nontarget vessel revascularization (ie, ≥70% DS by 2-dimensional quantitative coronary angiography or ≥50% DS and ischemia) at 5 years. Of 1161 patients with ST-segment-elevation myocardial infarction, 946 vessels in 617 patients were analyzable by QFR. At 5 years, the rate of the primary end point was significantly higher in patients with QFR ≤0.80 (n=35 patients, n=36 vessels) versus QFR >0.80 (n=582 patients, n=910 vessels) (62.9% versus 12.5%, respectively; hazard ratio [HR], 7.33 [95% CI, 4.54-11.83], P30% DS by 3-dimensional quantitative coronary angiography. Conclusions Our study suggests incremental value of QFR over angiography-guided percutaneous coronary intervention for nonculprit lesions among patients with ST-segment-elevation myocardial infarction undergoing primary percutaneous coronary intervention

Multi-material additive manufacturing of low sintering temperature Bi2Mo2O9 ceramics with Ag floating electrodes by selective laser burnout

Additive manufacturing (AM) of co-fired low temperature ceramics offers a unique route for fabrication of novel 3D radio frequency (RF) and microwave communication components, embedded electronics and sensors. This paper describes the first-ever direct 3D printing of low temperature co-fired ceramics/floating electrode 3D structures. Slurry-based AM and selective laser burnout (SLB) were used to fabricate bulk dielectric, Bi2Mo2O9 (BMO, sintering temperature = 620–650°C, εr = 38) with silver (Ag) internal floating electrodes. A printable BMO slurry was developed and the SLB optimised to improve edge definition and burn out the binder without damaging the ceramic. The SLB increased the green strength needed for shape retention, produced crack-free parts and prevented Ag leaching into the ceramic during co-firing. The green parts were sintered after SLB in a conventional furnace at 645°C for 4 h and achieved 94.5% density, compressive strength of 4097 MPa, a relative permittivity (εr) of 33.8 and a loss tangent (tan δ) of 0.0004 (8 GHz) for BMO. The feasibility of using SLB followed by a post-printing sintering step to create BMO/Ag 3D structures was thus demonstrated

Microwave backscatter enhancement using radial anisotropy in biomimetic core-shell spheres

This is the final version. Available on open access from the American Institute of Physics via the DOI in this record.Data availability: The data that support the findings of this study are available from the corresponding authors upon reasonable request.Enhanced backscattering of microwave radiation is demonstrated experimentally in a biomimetic radially anisotropic spherical metamaterial component. The core-shell device replicates the optical function of nanospheres observed in the tapetum reflector of the compound eye of the shrimp Litopenaeus vannamei (Boone, 1931) and translates the effect from the optical domain to microwave frequencies. Analytical Mie theory calculations and numerical-method simulations are used to describe the origin of the observed scattering from a single dielectric sphere in terms of its multipolar Mie resonances. The fabrication of components using additive manufacture and their experimental characterization are described. The results show that the introduction of radial anisotropy in the shell more than doubles the monostatic radar cross section compared to the equivalent isotropic case. This work represents a practical demonstration of a synthetic bio-inspired structure, harnessing performance-enhancing adaptations that have evolved in nature. The results augment the range of techniques available for the control of electromagnetic scattering with relevance to applications in the manipulation of radar return signals.Engineering and Physical Sciences Research Council (EPSRC)Royal Academy of Engineerin

Effect of remote ischaemic conditioning on infarct size and remodelling in ST-segment elevation myocardial infarction patients: the CONDI-2/ERIC-PPCI CMR substudy

The effect of limb remote ischaemic conditioning (RIC) on myocardial infarct (MI) size and left ventricular ejection fraction (LVEF) was investigated in a pre-planned cardiovascular magnetic resonance (CMR) substudy of the CONDI-2/ERIC-PPCI trial. This single-blind multi-centre trial (7 sites in UK and Denmark) included 169 ST-segment elevation myocardial infarction (STEMI) patients who were already randomised to either control (n = 89) or limb RIC (n = 80) (4 × 5 min cycles of arm cuff inflations/deflations) prior to primary percutaneous coronary intervention. CMR was performed acutely and at 6 months. The primary endpoint was MI size on the 6 month CMR scan, expressed as median and interquartile range. In 110 patients with 6-month CMR data, limb RIC did not reduce MI size [RIC: 13.0 (5.1–17.1)% of LV mass; control: 11.1 (7.0–17.8)% of LV mass, P = 0.39], or LVEF, when compared to control. In 162 patients with acute CMR data, limb RIC had no effect on acute MI size, microvascular obstruction and LVEF when compared to control. In a subgroup of anterior STEMI patients, RIC was associated with lower incidence of microvascular obstruction and higher LVEF on the acute scan when compared with control, but this was not associated with an improvement in LVEF at 6 months. In summary, in this pre-planned CMR substudy of the CONDI-2/ERIC-PPCI trial, there was no evidence that limb RIC reduced MI size or improved LVEF at 6 months by CMR, findings which are consistent with the neutral effects of limb RIC on clinical outcomes reported in the main CONDI-2/ERIC-PPCI trial

Seasonality of ventricular fibrillation at first myocardial infarction and association with viral exposure

AIMS:To investigate seasonality and association of increased enterovirus and influenza activity in the community with ventricular fibrillation (VF) risk during first ST-elevation myocardial infarction (STEMI). METHODS:This study comprised all consecutive patients with first STEMI (n = 4,659; aged 18-80 years) admitted to the invasive catheterization laboratory between 2010-2016, at Copenhagen University Hospital, Rigshospitalet, covering eastern Denmark (2.6 million inhabitants, 45% of the Danish population). Hospital admission, prescription, and vital status data were assessed using Danish nationwide registries. We utilized monthly/weekly surveillance data for enterovirus and influenza from the Danish National Microbiology Database (2010-2016) that receives copies of laboratory tests from all Danish departments of clinical microbiology. RESULTS:Of the 4,659 consecutively enrolled STEMI patients, 581 (12%) had VF before primary percutaneous coronary intervention. In a subset (n = 807), we found that VF patients experienced more generalized fatigue and flu-like symptoms within 7 days before STEMI compared with the patients without VF (OR 3.39, 95% CI 1.76-6.54). During the study period, 2,704 individuals were diagnosed with enterovirus and 19,742 with influenza. No significant association between enterovirus and VF (OR 1.00, 95% CI 0.99-1.02), influenza and VF (OR 1.00, 95% CI 1.00-1.00), or week number and VF (p-value 0.94 for enterovirus and 0.89 for influenza) was found. CONCLUSION:We found no clear seasonality of VF during first STEMI. Even though VF patients had experienced more generalized fatigue and flu-like symptoms within 7 days before STEMI compared with patients without VF, no relationship was found between enterovirus or influenza exposure and occurrence of VF