148 research outputs found
Overview of the Kepler Science Processing Pipeline
The Kepler Mission Science Operations Center (SOC) performs several critical
functions including managing the ~156,000 target stars, associated target
tables, science data compression tables and parameters, as well as processing
the raw photometric data downlinked from the spacecraft each month. The raw
data are first calibrated at the pixel level to correct for bias, smear induced
by a shutterless readout, and other detector and electronic effects. A
background sky flux is estimated from ~4500 pixels on each of the 84 CCD
readout channels, and simple aperture photometry is performed on an optimal
aperture for each star. Ancillary engineering data and diagnostic information
extracted from the science data are used to remove systematic errors in the
flux time series that are correlated with these data prior to searching for
signatures of transiting planets with a wavelet-based, adaptive matched filter.
Stars with signatures exceeding 7.1 sigma are subjected to a suite of
statistical tests including an examination of each star's centroid motion to
reject false positives caused by background eclipsing binaries. Physical
parameters for each planetary candidate are fitted to the transit signature,
and signatures of additional transiting planets are sought in the residual
light curve. The pipeline is operational, finding planetary signatures and
providing robust eliminations of false positives.Comment: 8 pages, 3 figure
Terrestrial Planet Occurrence Rates for the Kepler GK Dwarf Sample
We measure planet occurrence rates using the planet candidates discovered by
the Q1-Q16 Kepler pipeline search. This study examines planet occurrence rates
for the Kepler GK dwarf target sample for planet radii, 0.75<Rp<2.5 Rearth, and
orbital periods, 50<Porb<300 days, with an emphasis on a thorough exploration
and identification of the most important sources of systematic uncertainties.
Integrating over this parameter space, we measure an occurrence rate of F=0.77
planets per star, with an allowed range of 0.3<F<1.9. The allowed range takes
into account both statistical and systematic uncertainties, and values of F
beyond the allowed range are significantly in disagreement with our analysis.
We generally find higher planet occurrence rates and a steeper increase in
planet occurrence rates towards small planets than previous studies of the
Kepler GK dwarf sample. Through extrapolation, we find that the one year
orbital period terrestrial planet occurrence rate, zeta_1=0.1, with an allowed
range of 0.01<zeta_1<2, where zeta_1 is defined as the number of planets per
star within 20% of the Rp and Porb of Earth. For G dwarf hosts, the zeta_1
parameter space is a subset of the larger eta_earth parameter space, thus
zeta_1 places a lower limit on eta_earth for G dwarf hosts. From our analysis,
we identify the leading sources of systematics impacting Kepler occurrence rate
determinations as: reliability of the planet candidate sample, planet radii,
pipeline completeness, and stellar parameters.Comment: 19 Pages, 17 Figures, Submitted ApJ. Python source to support Kepler
pipeline completeness estimates available at
http://github.com/christopherburke/KeplerPORTs
Validation of Kepler's Multiple Planet Candidates. III: Light Curve Analysis & Announcement of Hundreds of New Multi-planet Systems
The Kepler mission has discovered over 2500 exoplanet candidates in the first
two years of spacecraft data, with approximately 40% of them in candidate
multi-planet systems. The high rate of multiplicity combined with the low rate
of identified false-positives indicates that the multiplanet systems contain
very few false-positive signals due to other systems not gravitationally bound
to the target star (Lissauer, J. J., et al., 2012, ApJ 750, 131). False
positives in the multi- planet systems are identified and removed, leaving
behind a residual population of candidate multi-planet transiting systems
expected to have a false-positive rate less than 1%. We present a sample of 340
planetary systems that contain 851 planets that are validated to substantially
better than the 99% confidence level; the vast majority of these have not been
previously verified as planets. We expect ~2 unidentified false-positives
making our sample of planet very reliable. We present fundamental planetary
properties of our sample based on a comprehensive analysis of Kepler light
curves and ground-based spectroscopy and high-resolution imaging. Since we do
not require spectroscopy or high-resolution imaging for validation, some of our
derived parameters for a planetary system may be systematically incorrect due
to dilution from light due to additional stars in the photometric aperture.
None the less, our result nearly doubles the number of verified exoplanets.Comment: 138 pages, 8 Figures, 5 Tables. Accepted for publications in the
Astrophysical Journa
Detection of Potential Transit Signals in the First Three Quarters of Kepler Mission Data
We present the results of a search for potential transit signals in the first
three quarters of photometry data acquired by the Kepler Mission. The targets
of the search include 151,722 stars which were observed over the full interval
and an additional 19,132 stars which were observed for only 1 or 2 quarters.
From this set of targets we find a total of 5,392 detections which meet the
Kepler detection criteria: those criteria are periodicity of the signal, an
acceptable signal-to-noise ratio, and a composition test which rejects spurious
detections which contain non-physical combinations of events. The detected
signals are dominated by events with relatively low signal-to-noise ratio and
by events with relatively short periods. The distribution of estimated transit
depths appears to peak in the range between 40 and 100 parts per million, with
a few detections down to fewer than 10 parts per million. The detected signals
are compared to a set of known transit events in the Kepler field of view which
were derived by a different method using a longer data interval; the comparison
shows that the current search correctly identified 88.1% of the known events. A
tabulation of the detected transit signals, examples which illustrate the
analysis and detection process, a discussion of future plans and open,
potentially fruitful, areas of further research are included
Detection of Potential Transit Signals in Sixteen Quarters of Kepler Mission Data
We present the results of a search for potential transit signals in four
years of photometry data acquired by the Kepler Mission. The targets of the
search include 111,800 stars which were observed for the entire interval and
85,522 stars which were observed for a subset of the interval. We found that
9,743 targets contained at least one signal consistent with the signature of a
transiting or eclipsing object, where the criteria for detection are
periodicity of the detected transits, adequate signal-to-noise ratio, and
acceptance by a number of tests which reject false positive detections. When
targets that had produced a signal were searched repeatedly, an additional
6,542 signals were detected on 3,223 target stars, for a total of 16,285
potential detections. Comparison of the set of detected signals with a set of
known and vetted transit events in the Kepler field of view shows that the
recovery rate for these signals is 96.9%. The ensemble properties of the
detected signals are reviewed.Comment: Accepted by ApJ Supplemen
Planetary Candidates Observed by Kepler. VII. The First Fully Uniform Catalog Based on The Entire 48 Month Dataset (Q1-Q17 DR24)
We present the seventh Kepler planet candidate catalog, which is the first to
be based on the entire, uniformly processed, 48 month Kepler dataset. This is
the first fully automated catalog, employing robotic vetting procedures to
uniformly evaluate every periodic signal detected by the Q1-Q17 Data Release 24
(DR24) Kepler pipeline. While we prioritize uniform vetting over the absolute
correctness of individual objects, we find that our robotic vetting is overall
comparable to, and in most cases is superior to, the human vetting procedures
employed by past catalogs. This catalog is the first to utilize artificial
transit injection to evaluate the performance of our vetting procedures and
quantify potential biases, which are essential for accurate computation of
planetary occurrence rates. With respect to the cumulative Kepler Object of
Interest (KOI) catalog, we designate 1,478 new KOIs, of which 402 are
dispositioned as planet candidates (PCs). Also, 237 KOIs dispositioned as false
positives (FPs) in previous Kepler catalogs have their disposition changed to
PC and 118 PCs have their disposition changed to FP. This brings the total
number of known KOIs to 8,826 and PCs to 4,696. We compare the Q1-Q17 DR24 KOI
catalog to previous KOI catalogs, as well as ancillary Kepler catalogs, finding
good agreement between them. We highlight new PCs that are both potentially
rocky and potentially in the habitable zone of their host stars, many of which
orbit solar-type stars. This work represents significant progress in accurately
determining the fraction of Earth-size planets in the habitable zone of
Sun-like stars. The full catalog is publicly available at the NASA Exoplanet
Archive.Comment: Accepted to the Astrophysical Journal Supplement Series. 30 pages, 9
figures, 7 tables. We make the DR24 robovetter decision code publicly
available at http://github.com/JeffLCoughlin/robovetter, with input and
output examples provided using the same data as contained in the full paper's
table
In-situ high-temperature EXAFS measurements on radioactive and air-sensitive molten salt materials
The development at the Delft University of Technology (TU Delft, The Netherlands) of an experimental set-up dedicated to high-temperature in situ EXAFS measurements of radioactive, air-sensitive and corrosive fluoride salts is reported. A detailed description of the sample containment cell, of the furnace design, and of the measurement geometry allowing simultaneous transmission and fluorescence measurements is given herein. The performance of the equipment is tested with the room-temperature measurement of thorium tetrafluoride, and the Th—F and Th—Th bond distances obtained by fitting of the EXAFS data are compared with the ones extracted from a refinement of neutron diffraction data collected at the PEARL beamline at TU Delft. The adequacy of the sample confinement is checked with a mapping of the thorium concentration profile of molten salt material. Finally, a few selected salt mixtures (LiF:ThF4) = (0.9:0.1), (0.75:0.25), (0.5:0.5) and (NaF:ThF4) = (0.67:0.33), (0.5:0.5) are measured in the molten state. Qualitative trends along the series are discussed, and the experimental data for the (LiF:ThF4) = (0.5:0.5) composition are compared with the EXAFS spectrum generated from molecular dynamics simulations
- …