A new CAE procedure for railway wheel tribological design

New demands are being imposed on railway wheel wear and reliability to increase the time between wheel reprofiling, improve safety and reduce total wheelset lifecycle costs. In parallel with these requirements, changes in railway vehicle missions are also occurring. These have led to the need to operate rolling stock on track with low as well as high radius curves; increase speeds and axle loads; and contend with a decrease in track quality due to a reduction in maintenance. These changes are leading to an increase in the severity of the wheel/rail contact conditions, which may increase the likelihood of wear or damage occurring. The aim of this work was to develop a new CAE design methodology to deal with these demands. The model should integrate advanced numerical tools for modelling of railway vehicle dynamics and suitable models to predict wheelset durability under typical operating conditions. This will help in designing wheels for minimum wheel and rail wear; optimising railway vehicle suspensions and wheel profiles; maintenance scheduling and the evaluation of new wheel materials. This work was carried out as part of the project HIPERWheel, funded by the European Community within the Vth Framework Programme

High-precision lateral distortion measurement and correction in coherence scanning interferometry using an arbitrary surface

Lateral optical distortion is present in most optical imaging systems. In coherence scanning interferometry, distortion may cause field-dependent systematic errors in the measurement of surface topography. These errors become critical when high-precision surfaces, e.g. precision optics, are measured. Current calibration and correction methods for distortion require some form of calibration artefact that has a smooth local surface and a grid of high-precision manufactured features. Moreover, to ensure high accuracy and precision of the absolute and relative locations of the features of these artefacts, requires their positions to be determined using a traceable measuring instrument, e.g. a metrological atomic force microscope. Thus, the manufacturing and calibration processes for calibration artefacts are often expensive and complex. In this paper, we demonstrate for the first time the calibration and correction of optical distortion in a coherence scanning interferometer system by using an arbitrary surface that contains some deviations from flat and has some features (possibly just contamination), such that feature detection is possible. By using image processing and a self-calibration technique, a precision of a few nanometres is achieved for the distortion correction. An inexpensive metal surface, e.g. the surface of a coin, or a scratched and defected mirror, which can be easily found in a laboratory or workshop, may be used. The cost of the distortion correction with nanometre level precision is reduced to almost zero if the absolute scale is not required. Although an absolute scale is still needed to make the calibration traceable, the problem of obtaining the traceability is simplified as only a traceable measure of the distance between two arbitrary points is needed. Thus, the total cost of transferring the traceability may also be reduced significantly using the proposed method

Rationalisation in public dental care – impact on clinical work tasks and mechanical exposure for dentists – a prospective study

Swedish dentistry has been exposed to frequent rationalisation initiatives during the last half century. Previous research has shown that rationalisation often results in increased risk of developing work-related musculoskeletal disorders, thus reducing sustainability in the production system. In this prospective study, we assessed mechanical exposures among Swedish dentists in relation to specific rationalisations of clinical dental work during a six-year period. Body postures and movements of 12 dentists were assessed by inclinometry synchronised to video recordings of their work. No rationalisation effects could be shown in terms of a reduction in non-value-adding work (waste'), and at job level, no major differences in mechanical exposure could be shown between baseline and follow-up. Conclusion: The present rationalisation measures in dentistry do not seem to result in rationalisation at job level, but may potentially be more successful at the overall dental system level. Practitioner summary: In contrast to many previous investigations of the mechanical exposure implications of rationalisation, the present rationalisation measures did not increase the level of risk for dentists. It is highlighted that all occupations involved in the production system should be investigated to assess production system sustainability

Managing the therapeutic relationship in online cognitive behavioural therapy for depression:Therapists' treatment of clients' contributions

This article examines how therapists and clients manage the therapeutic relationship in online psychotherapy. Our study focuses on early sessions of therapy involving 22 therapist-client pairs participating in online Cognitive Behavioural Therapy (CBT) for depression. Using Conversation Analysis (CA), we examine how therapists can orient to clients’ contributions, while also retaining control of the therapeutic trajectory. We report two practices that therapists can use, at their discretion, following clients’ responses to requests for information. The first, thanking, accepts clients’ responses, orienting to the neutral affective valence of those responses. The second, commiseration, orients to the negative affective valence of clients’ responses. We argue that both practices are a means by which therapists can simultaneously manage developing rapport, while also retaining control of the therapeutic process

Managing clients’ expectations at the outset of online Cognitive Behavioural Therapy (CBT) for depression

Background\ud \ud Engaging clients in psychotherapy by managing their expectations is important for therapeutic success. Initial moments in first sessions of therapy are thought to afford an opportunity to establish a shared understanding of how therapy will proceed. However there is little evidence from analysis of actual sessions of therapy to support this.\ud \ud Objective\ud \ud This study utilised recordings to examine how therapists manage clients’ expectations during the first two sessions of online Cognitive Behavioural Therapy (CBT). \ud Methods Expectation management was investigated through conversation analysis of sessions from 176 client-therapist dyads involved in online CBT. The primary focus of analysis was expectation management during the initial moments of first sessions, with a secondary focus on expectations at subsequent points. \ud \ud Analysis\ud \ud Clients’ expectations for therapy were most commonly managed during the initial moments of first sessions of therapy. At this point, most therapists either outlined the tasks of the first and subsequent sessions (n=36), or the first session only (n=108). On other occasions (n = 32), no attempt was made to manage clients’ expectations by outlining what would happen in therapy. Observations of the interactional consequences of such an absence suggest clients may struggle to engage with the therapeutic process in the absence of appropriate expectation management by therapists. \ud \ud Conclusion\ud \ud Clients may more readily engage from the outset of therapy when provided with an explanation that manages their expectation of what is involved. Therapists can accomplish this by projecting how therapy will proceed, particularly beyond the initial session

Separation of rare earths and other valuable metals from deep-eutectic solvents: a new alternative for the recycling of used NdFeB magnets

Deep-eutectic solvents (DESs) are used as a promising alternative to aqueous solutions for the recovery of valuable metals from NdFeB magnets. A deep-eutectic solvent based on choline chloride and lactic acid (molar ratio 1 : 2) was used for the leaching of rare earths and other metals from NdFeB magnets. A process for the separation of Fe, B and Co from Nd and Dy in the deep-eutectic solvent was developed by using the ionic liquid tricaprylmethylammonium thiocyanate (Aliquat 336 SCN, [A336][SCN]) diluted in toluene (0.9 M). The extraction parameters were optimized and stripping of B was efficiently carried out by HCl, while EDTA was employed for the recovery of Fe and Co. The separation of Nd and Dy was assessed by using two different types of extractants, a mixture of trialkylphosphine oxides (Cyanex 923) and bis(2-ethylhexyl) phosphoric acid (D2EHPA). Based on the distribution ratios, separation factors and the ease of subsequent stripping, Cyanex 923 was chosen as the most effective extractant. The purified Dy present in the less polar phase was easily recovered by stripping with water, while the Nd present in the deep-eutectic solvent was recovered by precipitation stripping with a stoichiometric amount of oxalic acid. Nd2O3 and Dy2O3 were recovered with a purity of 99.87% and 99.94%, respectively. The feasibility to scale up this separation process was corroborated by a setup of mixer-settlers and highlighted by the possibility to fully recover and reuse the deep-eutectic solvent and the less polar phases employed in the extractions. The new proposed system based on a deep-eutectic solvent combined with traditional organic extraction phases presented higher selectivities and efficiencies than the analogous aqueous system. Extended X-ray absorption fine structure (EXAFS) was employed to elucidate the different mechanisms for extraction of Co and Fe from the deep-eutectic solvent and from an aqueous solution

BVOC ecosystem flux measurements at a high latitude wetland site

In this study, we present summertime concentrations and fluxes of biogenic volatile organic compounds (BVOCs) measured at a sub-arctic wetland in northern Sweden using a disjunct eddy-covariance (DEC) technique based on a proton transfer reaction mass spectrometer (PTR-MS). The vegetation at the site was dominated by <i>Sphagnum</i>, <i>Carex</i> and extit{Eriophorum} spp. The measurements reported here cover a period of 50 days (1 August to 19 September 2006), approximately one half of the growing season at the site, and allowed to investigate the effect of day-to-day variation in weather as well as of vegetation senescence on daily BVOC fluxes, and on their temperature and light responses. The sensitivity drift of the DEC system was assessed by comparing H<sub>3</sub>O<sup>+</sup>-ion cluster formed with water molecules (H<sub>3</sub>O<sup>+</sup>(H<sub>2</sub>O) at m37) with water vapour concentration measurements made using an adjacent humidity sensor, and the applicability of the DEC method was analysed by a comparison of sensible heat fluxes for high frequency and DEC data obtained from the sonic anemometer. These analyses showed no significant PTR-MS sensor drift over a period of several weeks and only a small flux-loss due to high-frequency spectrum omissions. This loss was within the range expected from other studies and the theoretical considerations. <br><br> Standardised (20 °C and 1000 μmol m<sup>−2</sup> s<sup>−1</sup> PAR) summer isoprene emission rates found in this study of 329 μg C m<sup>−2</sup> (ground area) h<sup>−1</sup> were comparable with findings from more southern boreal forests, and fen-like ecosystems. On a diel scale, measured fluxes indicated a stronger temperature dependence than emissions from temperate or (sub)tropical ecosystems. For the first time, to our knowledge, we report ecosystem methanol fluxes from a sub-arctic ecosystem. Maximum daytime emission fluxes were around 270 μg m<sup>−2</sup> h<sup>−1</sup> (ca. 100 μg C m<sup>−2</sup> h<sup>−1</sup>), and during most nights small negative fluxes directed from the atmosphere to the surface were observed