Therapeutic bullfrog oil-based nanoemulsion for oral application: Development, characterization and stability

The aim of this study was to develop, optimize, and characterize a stable therapeutic bullfrog oil based nanoemulsion for oral application using a rational experimental design approach. The optimized oral nanoemulsion contained 0.2 % sodium benzoate and 0.02 % propyl-paraben as preservatives; 0.1 % sucralose and 0.4 % acesulfam K as sweeteners and 0.1 % tutti-frutti as flavoring to mask the unpleasant organoleptic characteristics of bullfrog oil. The oral O/W-nanoemulsion showed the droplet size, PDI, zeta potential, and pH of 410 ± 8nm, 0.20 ± 0.02, –38 ± 2.5 mV, and 6.43 ± 0.05, respectively. The optimized oral nanoemulsion showed a milky single-phase and optimal physical stability at 25 °C for 90 days. Indeed, higher oxidation induction time and lower formation of peroxides in the oral nanoemulsion were responsible for improving its stability. A therapeutic delivery system containing bullfrog oil for oral application was successfully developed and optimized with ideal thermo-oxidative stability

Trends in rheumatic fever: clinical aspects and perspectives in prophylactic treatments

Introduction: Rheumatic fever (RF), a systemic illness that may occur following Group A beta-hemolytic streptococcal (GABHS) pharyngitis in children, is a major problem in countries with limited resources. Because of its long track record and low cost, an injection of benzathine penicillin G (BPG) suspension every 3 or 4 weeks has been used as secondary prophylaxis. Despite its excellent in vitro efficacy, the inability of BPG to eradicate GABHS has been frequently reported.Areas covered: This work reviews the possible causes of failure, as well as the inconvenience of the current prophylactic treatment of acute RF and suggests a new pharmacotherapeutic system that could replace the current one.Expert opinion: RF is a major problem concerning only countries with limited resources and could be considered as a neglected disease. The dose regimen using BPG suspension results in failures, which could be avoided by the use of nanocarrier-based systems. To meet this ultimate goal, the research should be transposed from the laboratory scale to an industrial and clinical application level. This research should be conducted to produce a pharmaceutical dosage form that will be commercially available, consumed by and affordable for patients. However, health, environmental and socioeconomic hazards should be considered

Pharmaceutical Care Practice and Consequences on Quality of Life and Satisfaction of Diabetic Patients: A Randomized Clinical Trial

The pursuit of quality of life, which has become marked in recent years, has translated into important population health benefits. This study assessed the quality of life of patients with type 2 diabetes (T2DM) who received pharmaceutical care, and their satisfaction with the service provided in community pharmacies. This single blind, randomized controlled clinical trial included 100 patients. The intervention group (N=47) received pharmaceutical care by a clinical pharmacist and the control group (N=42) received standard care. The Quality of Life Diabetes Questionnaire (DQOL) was used to measure all participants´ quality of life at study enrollment and six months later. Satisfaction of the participants in the intervention group was measured using a validated 14-items questionnaire. At the end of the study, participants in the intervention group had a statistically significant improvement in DQOL scores ( -0.62 x 1.57, p < 0.001) and were highly satisfied with the intervention (96% excellent satisfaction scores). Pharmaceutical care practice was associated with high satisfaction and increased quality of life scores in T2DM patients. These results underscore the important role of pharmacists to improve the health of diabetic patients

Match of solubility parameters between oil and surfactants as a rational approach for the formulation of microemulsion with a high dispersed volume of copaiba oil and low surfactant content

Aim was to formulate oil-in-water (O/W) microemulsion with a high volume ratio of complex natural oil, i.e. copaiba oil and low surfactant content. The strategy of formulation was based on (i) the selection of surfactants based on predictive calculations of chemical compatibility between their hydrophobic moiety and oil components and (ii) matching the HLB of the surfactants with the required HLB of the oil. Solubility parameters of the hydrophobic moiety of the surfactants and of the main components found in the oil were calculated and compared. In turn, required HLB of oils were calculated. Selection of surfactants was achieved matching their solubility parameters with those of oil components. Blends of surfactants were prepared with HLB matching the required HLB of the oils. Oil:water mixtures (15:85 and 25:75) were the titrated with surfactant blends until a microemulsion was formed. Two surfactant blends were identified from the predictive calculation approach. Microemulsions containing up to 19.6% and 13.7% of selected surfactant blends were obtained. O/W microemulsions with a high volume fraction of complex natural oil and a reasonable surfactant concentration were formulated. These microemulsions can be proposed as delivery systems for the oral administration of poorly soluble drugs331230313043COORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPES721/1

Development and characterization of biocompatible isotropic and anisotropic oil-in-water colloidal dispersions as a new delivery system for methyl dihydrojasmonate antitumor drug

Microemulsions (MEs) are colloidal systems that can be used for drug-delivery and drug-targeting purposes. These systems are able to incorporate drugs modifying bioavailability and stability and reducing toxic effects. The jasmonate compounds belong to a group of plant stress hormones, and the jasmonic acid and its methyl ester derivative have been described as having anticancer activity. However, these compounds are very poorly water-soluble, not allowing administration by an intravenous route without an efficient nanostructured carrier system. In this work, biocompatible MEs of appropriate diameter size for intravenous route administration, loaded and unloaded with methyl dihydrojasmonate (MJ), were developed and described in a pseudo-ternary phase diagram. The compositions of the MEs were carefully selected from their own regions in the pseudo-ternary phase diagram. The formulations were analyzed by light scattering, polarized light microscopy, and X-ray diffraction. Also, a study on rheological profile was performed. The results showed that the droplet size decreased with both MJ incorporation and oil phase/surfactant ratio. All compositions of the studied MEs showed rheological behavior of pseudoplastic fluid and amorphous structures. In the absence of MJ, most of the studied MEs had thixotropic characteristics, which became antithixotropic in the presence of the drug. Almost all MJ-unloaded MEs presented anisotropic characteristics, but some formulations became isotropic, especially in the presence of MJ. The results of this study support the conclusion that the studied system represents a promising vehicle for in vivo administration of the MJ antitumor drug.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq

Structural Properties Induced by the Composition of Biocompatible Phospholipid-Based Microemulsion and Amphotericin B Association

Anionic microemulsions (MEs) containing soya phosphatidylcholine, Tween-20, sodium oleate as surfactant, and cholesterol as oil phase were investigated as drug carriers for amphotericin B. Depending on the composition of the microemulsion, various structures, which differently interact with amphotericin B, can be formed. The nanostructured systems were characterized by photon correlation spectroscopy, rheological behavior, and polarized light microscopy. The results reveal that the droplet diameters increased with amphotericin B incorporation for all ranges of surfactant and oil phase. For both amphotericin B-unloaded and amphotericin B-loaded microemulsions, the profile of the oil droplet diameter decreased with increasing the surfactant concentration, demonstrating the stabilizing effect of the surfactant. The increase in the oil phase proportions led to the growth of the droplet diameter, clearly demonstrating the limit of the surfactant organization in the oil-water interface. The amphotericim B incorporation into microemulsion increased with the fraction volume of the oil phase and the surfactant concentration reaching a plateau at high contents. This profile could be quantitatively analyzed by the framework of the pseudo-phase model that considers the amphotericim B distribution between the oil and the aqueous phases. The rheological analysis showed a pseudoplastic behavior with little thixotropic characteristic. Under polarized light, the system of interest showed a dark background characteristic of dispersed droplets. However, for both amphotericim B-loaded and amphotericim B unloaded microemulsions, the increase in the O/S ratio led to the formation of ordered structures with lamellar arrangements.Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES

Physical factors affecting plasmid DNA compaction in stearylamine-containing nanoemulsions intended for gene delivery

Cationic lipids have been used in the development of non-viral gene delivery systems as lipoplexes. Stearylamine, a cationic lipid that presents a primary amine group when in solution, is able to compact genetic material by electrostatic interactions. In dispersed systems such as nanoemulsions this lipid anchors on the oil/water interface confering a positive charge to them. The aim of this work was to evaluate factors that influence DNA compaction in cationic nanoemulsions containing stearylamine. The influence of the stearylamine incorporation phase (water or oil), time of complexation, and different incubation temperatures were studied. The complexation rate was assessed by electrophoresis migration on agarose gel 0.7%, and nanoemulsion and lipoplex characterization was done by Dynamic Light Scattering (DLS). The results demonstrate that the best DNA compaction process occurs after 120 min of complexation, at low temperature (4 ± 1 °C), and after incorporation of the cationic lipid into the aqueous phase. Although the zeta potential of lipoplexes was lower than the results found for basic nanoemulsions, the granulometry did not change. Moreover, it was demonstrated that lipoplexes are suitable vehicles for gene delivery. © 2012 by the authors; licensee MDPI, Basel, Switzerland

Thermal behavior and stability of biodegradable spray-dried microparticles containing triamcinolone

Thermal analysis has been widely used for obtaining information about drug-polymer interactions and for pre-formulation studies of pharmaceutical dosage forms. In this work, biodegradable microparticles Of Poly (D,L-lactide-co-glycolide) (PLGA) containing triamcinolone (TR) in various drug:polymer ratios were produced by spray drying. The main purpose of this study was to study the effect of the spray-drying process not only on the drug-polymer interactions but also on the stability of microparticles using differential scanning calorimetry (DSC), thermogravimetry (TG) and derivative thermogravimetry (DTG), X-ray analysis (XRD), and infrared spectroscopy (IR). The evaluation of drug-polymer interactions and the pre-formulation studies were assessed using the DSC, TG and DTG, and IR. The quantitative analysis of drugs entrapped in PLGA microparticles was performed by the HPLC method. The results showed high levels of drug-loading efficiency for all used drug: polymer ratio, and the polymorph used for preparing the microparticles was the form B. The DSC and TG/DTG profiles for drug-loaded microparticles were very similar to those for the physical mixtures of the components. Therefore, a correlation between drug content and the structural and thermal properties of drug-loaded PLGA microparticles was established. These data indicate that the spray-drying technique does not affect the physico-chemical stability of the microparticle components. These results are in agreement with the IR analysis demonstrating that no significant chemical interaction occurs between TR and PLGA in both physical mixtures and microparticles. The results of the X-ray analysis are in agreement with the thermal analysis data showing that the amorphous form of TR prevails over a small fraction of crystalline phase of the drug also present in the TR-loaded microparticles. From the pre-formulation studies, we have found that the spray-drying methodology is an efficient process for obtaining TR-loaded PLGA microparticles. (C) 2008 Elsevier B.V. All rights reserved.FAPESPFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)CNPqPADC-FCFPADC-FCFCAPESCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES

Estudo de liberação e permeação in vitro do diclofenaco de dietilamônio em microemulsão gel-like

The goal of this study was to produce and characterize a new microemulsion gel-like carrier system (MEG) by using the pseudo-ternary phase-diagram concept. The diclofenac diethylamine (DDA) was incorporated in the MEG and its in vitro release and permeation profiles were performed using Franz-type diffusion cells. The results revealed that the commercial DDA emulgel provided significantly higher Kp of DDA (2.2-fold) as compared to the MEG. Similar data were obtained in the permeation studies in which DDA Kp 4.7-fold higher. Therefore, MEG presents higher potential as a topical delivery system for DDA when compared to the commercial DDA emulgel