1,335 research outputs found
An Experimental Hatchery Project: studies of propagation, culture and biology of Snook (Centropomus undecimalis)
Determination of the absorption length of CO2, Nd:YAG and high power diode laser radiation for a selected grouting material
The laser beam absorption lengths of CO2, Nd:YAG and a high power diode laser (HPDL) radiation for a newly developed SiO2/Al2O3-based tile grout have been determined through the application of Beer-Lambert’s law. The findings revealed marked differences in the absorption lengths despite the material having similar beam absorption coefficients for the lasers. The absorption lengths for the SiO2/Al2O3-based tile grout for CO2, Nd:YAG and HPDL radiation were calculated as being 23211 m, 1934 m and 1838 m respectively. Moreover, this method of laser beam absorption length determination, which has hitherto been used predominantly with lasers operated in the pulsed mode, is shown to be valid for use with lasers operated in the continuous wave (CW) mode, depending upon the material being treated
A portable high power diode laser-based single-stage ceramic tile grout sealing system
By means of a 60 W high power diode laser (HPDL) and a specially developed grout material the void between adjoining ceramic tiles has been successfully sealed. A single-stage process has been developed which uses a crushed ceramic tile mix to act as a tough, inexpensive bulk substrate and a glazed enamel surface to provide an impervious surface glaze. The single-stage ceramic tile grout sealing process yielded seals produced in normal atmospheric conditions that displayed no discernible cracks and porosities. The single-stage grout is simple to formulate and easy to apply. Tiles were successfully sealed with power densities as low as 200 kW/mm2 and at rates of up to 600 mm/min. Bonding of the enamel to the crushed ceramic tile mix was identified as being primarily due to van der Waals forces and, on a very small scale, some of the crushed ceramic tile mix material dissolving into the glaze. In terms of mechanical, physical and chemical characteristics, the single-stage ceramic tile grout was found to be far superior to the conventional epoxy tile grout and, in many instances, matched and occasionally surpassed that of the ceramic tiles themselves. What is more, the development of a hand-held HPDL beam delivery unit and the related procedures necessary to lead to the commercialisation of the single-stage ceramic tile grout sealing process are presented. Further, an appraisal of the potential hazards associated with the use of the HPDL in an industrial environment and the solutions implemented to ensure that the system complies with the relevant safety standards are given
Recommended from our members
Defense Waste Processing Facility Radioactive Operations - Year Two
The Savannah River Site`s Defense Waste Processing Facility (DWPF) near Aiken, SC is the nation`s first high-level radioactive waste vitrification facility. This waste (130 million liters) which has been stored in carbon steel underground tanks and is now being pretreated, melted into a highly durable borosilicate glass and poured into stainless steel canisters for eventual disposal in a geologic repository. Following a ten-year construction period and nearly three-year nonradioactive test program, the DWPF began radioactive operations in March 1996. The first nine months of radioactive operations have been reported previously. As with any complex technical facility, difficulties were encountered during the transition to radioactive operations. Results of the second year of radioactive operations are presented in this paper. The discussion includes: feed preparation and glass melting, resolution of the melter pouring issues, improvements in processing attainment and throughput, and planned improvements in laboratory attainment and throughput
Delocalization Transition of a Rough Adsorption-Reaction Interface
We introduce a new kinetic interface model suitable for simulating
adsorption-reaction processes which take place preferentially at surface
defects such as steps and vacancies. As the average interface velocity is taken
to zero, the self- affine interface with Kardar-Parisi-Zhang like scaling
behaviour undergoes a delocalization transition with critical exponents that
fall into a novel universality class. As the critical point is approached, the
interface becomes a multi-valued, multiply connected self-similar fractal set.
The scaling behaviour and critical exponents of the relevant correlation
functions are determined from Monte Carlo simulations and scaling arguments.Comment: 4 pages with 6 figures, new comment
Renal pericytes: regulators of medullary blood flow
Regulation of medullary blood flow (MBF) is essential in maintaining normal kidney function. Blood flow to the medulla is supplied by the descending vasa recta (DVR), which arise from the efferent arterioles of juxtamedullary glomeruli. DVR are composed of a continuous endothelium, intercalated with smooth muscle-like cells called pericytes. Pericytes have been shown to alter the diameter of isolated and in situ DVR in response to vasoactive stimuli that are transmitted via a network of autocrine and paracrine signalling pathways. Vasoactive stimuli can be released by neighbouring tubular epithelial, endothelial, red blood cells and neuronal cells in response to changes in NaCl transport and oxygen tension. The experimentally described sensitivity of pericytes to these stimuli strongly suggests their leading role in the phenomenon of MBF autoregulation. Because the debate on autoregulation of MBF fervently continues, we discuss the evidence favouring a physiological role for pericytes in the regulation of MBF and describe their potential role in tubulo-vascular cross-talk in this region of the kidney. Our review also considers current methods used to explore pericyte activity and function in the renal medulla
Relative sea-level change in Newfoundland, Canada during the past ∼3000 years
Several processes contributing to coastal relative sea-level (RSL) change in the North Atlantic Ocean are observed and/or predicted to have distinctive spatial expressions that vary by latitude. To expand the latitudinal range of RSL records spanning the past ∼3000 years and the likelihood of recognizing the characteristic fingerprints of these processes, we reconstructed RSL at two sites (Big River and Placentia) in Newfoundland from salt-marsh sediment. Bayesian transfer functions established the height of former sea level from preserved assemblages of foraminifera and testate amoebae. Age-depth models constrained by radiocarbon dates and chronohorizons estimated the timing of sediment deposition. During the past ∼3000 years, RSL rose by ∼3.0 m at Big River and by ∼1.5 m at Placentia. A locally calibrated geotechnical model showed that post-depositional lowering through sediment compaction was minimal. To isolate and quantify contributions to RSL from global, regional linear, regional non-linear, and local-scale processes, we decomposed the new reconstructions (and those in an expanded, global database) using a spatio-temporal statistical model. The global component confirms that 20th century sea-level rise occurred at the fastest, century-scale rate in over 3000 years (P > 0.999). Distinguishing the contributions from local and regional non-linear processes is made challenging by a sparse network of reconstructions. However, only a small contribution from local-scale processes is necessary to reconcile RSL reconstructions and modeled RSL trends. We identified three latitudinally-organized groups of sites that share coherent regional non-linear trends and indicate that dynamic redistribution of ocean mass by currents and/or winds was likely an important driver of sea-level change in the North Atlantic Ocean during the past ∼3000 years
Life path analysis: scaling indicates priming effects of social and habitat factors on dispersal distances
1. Movements of many animals along a life-path can be separated into repetitive ones within home ranges and transitions between home ranges. We sought relationships of social and environmental factors with initiation and distance of transition movements in 114 buzzards Buteo buteo that were marked as nestlings with long-life radio tags.
2. Ex-natal dispersal movements of 51 buzzards in autumn were longer than for 30 later in their first year and than 35 extra-natal movements between home ranges after leaving nest areas. In the second and third springs, distances moved from winter focal points by birds that paired were the same or less than for unpaired birds. No post-nuptial movement exceeded 2 km.
3. Initiation of early ex-natal dispersal was enhanced by presence of many sibs, but also by lack of worm-rich loam soils. Distances travelled were greatest for birds from small broods and with relatively little short grass-feeding habitat near the nest. Later movements were generally enhanced by the absence of loam soils and short grassland, especially with abundance of other buzzards and probable poor feeding habitats (heathland, long grass).
4. Buzzards tended to persist in their first autumn where arable land was abundant, but subsequently showed a strong tendency to move from this habitat.
5. Factors that acted most strongly in ½-km buffers round nests, or round subsequent focal points, usually promoted movement compared with factors acting at a larger scale. Strong relationships between movement distances and environmental characteristics in ½-km buffers, especially during early ex-natal dispersal, suggested that buzzards became primed by these factors to travel far.
6. Movements were also farthest for buzzards that had already moved far from their natal nests, perhaps reflecting genetic predisposition, long-term priming or poor habitat beyond the study area
Faraday instability on viscous ferrofluids in a horizontal magnetic field: Oblique rolls of arbitrary orientation
A linear stability analysis of the free surface of a horizontally unbounded
ferrofluid layer of arbitrary depth subjected to vertical vibrations and a
horizontal magnetic field is performed. A nonmonotonic dependence of the
stability threshold on the magnetic field is found at high frequencies of the
vibrations. The reasons of the decrease of the critical acceleration amplitude
caused by a horizontal magnetic field are discussed. It is revealed that the
magnetic field can be used to select the first unstable pattern of Faraday
waves. In particular, a rhombic pattern as a superposition of two different
oblique rolls can occur. A scaling law is presented which maps all data into
one graph for the tested range of viscosities, frequencies, magnetic fields and
layer thicknesses.Comment: 8 pages, 6 figures, RevTex
The Random Quadratic Assignment Problem
Optimal assignment of classes to classrooms \cite{dickey}, design of DNA
microarrays \cite{carvalho}, cross species gene analysis \cite{kolar}, creation
of hospital layouts cite{elshafei}, and assignment of components to locations
on circuit boards \cite{steinberg} are a few of the many problems which have
been formulated as a quadratic assignment problem (QAP). Originally formulated
in 1957, the QAP is one of the most difficult of all combinatorial optimization
problems. Here, we use statistical mechanical methods to study the asymptotic
behavior of problems in which the entries of at least one of the two matrices
that specify the problem are chosen from a random distribution .
Surprisingly, this case has not been studied before using statistical methods
despite the fact that the QAP was first proposed over 50 years ago
\cite{Koopmans}. We find simple forms for and , the
costs of the minimal and maximum solutions respectively. Notable features of
our results are the symmetry of the results for and
and the dependence on only through its mean and standard deviation,
independent of the details of . After the asymptotic cost is determined for
a given QAP problem, one can straightforwardly calculate the asymptotic cost of
a QAP problem specified with a different random distribution
- …