Amperometric Determination of Chemical Oxygen Demand

A method is described for measuring the low level --5 to 50 ppm-- chemical oxygen demand (COD) of water samples by amperometric titration. The method involves digestion of the sample with potassium dichromate in a 50% sulfuric acid solution using one-fifth the reagents and sample required for the standard COD method. This is followed by an amperometric titration using a standard ferrous ammonium sulfate solution and employing a rotating platinum electrode in a three-electrode potentiostatic system. The titration is carried out at a potential of +0.80 volts versus a saturated calomel electrode, thus eliminating the need for O2 purging of the polarographic cell. The electrochemical method is compared to the standard method with respect to precision, sensitivity, cost and waste disposal

Assessing the Rehabilitation Status of the Reflooded Bahia Grande, Texas Based on Trace Gas Fluxes, Benthic Macroinvertebrates, and Fish Community Data Along Salinity and Seagrass Gradients

The Bahia Grande is a 6,500-acre tidal basin located at the southernmost tip of Texas. Tidal flow into this coastal estuary was cut off by construction projects in the 1930s, causing the basin to dry up for ~70 years. In 2005, a pilot channel was built to reconnect the estuary to tidal waters, allowing the basin to refill. However, the pilot channel, in addition to other barriers within the basin, do not allow for adequate tidal exchange, leading to intermittent, extreme hypersalinity. Presumably because of the extreme hypersalinity in parts of the Bahia Grande, seagrass beds, which play vital roles in controlling community composition and driving biotic processes in estuaries, are not uniform throughout the estuary. Thus, this project aimed to develop salinity and seagrass distribution models for the Bahia Grande and to investigate changes in trace gas fluxes, fish community structure, and macroinvertebrate community structure along those gradients

Decolonization of asymptomatic carriage of multi-drug resistant bacteria by bacteriophages?

Antimicrobial resistance is a major threat to human and animal health and accounted for up to 4.5 million deaths worldwide in 2019. Asymptomatic colonization of the digestive tract by multidrug resistant (multi-resistant) bacteria such as extended-spectrum beta-lactamase-, or carbapenemase- producing Enterobacterales is (i) a risk factor for infection by these multi-resistant bacteria, (ii) a risk factor of dissemination of these multi-resistant bacteria among patients and in the community, and (iii) allows the exchange of resistance genes between bacteria. Hence, decolonization or reduction of the gastrointestinal tract colonization of these multi-resistant bacteria needs to be urgently explored. Developing new non-antibiotic strategies to limit or eradicate multi-resistant bacteria carriage without globally disrupting the microbiota is considered a priority to fight against antibiotic resistance. Probiotics or Fecal Microbiota Transplantation are alternative strategies to antibiotics that have been considered to decolonize intestinal tract from MDR bacteria but there is currently no evidence demonstrating their efficacy. Lytic bacteriophages are viruses that kill bacteria and therefore could be considered as a promising strategy to combat antibiotic resistance. Successful decolonization by bacteriophages has already been observed clinically. Here, we discuss the current alternative strategies considered to decolonize the digestive tract of multidrug resistant bacteria, briefly describing probiotics and fecal microbiota transplantation approaches, and then detail the in vivo and in vitro studies using bacteriophages, while discussing their limits regarding the animal models used, the characteristics of phages used and their activity in regards of the gut anatomy

Top-soil water retention in organic and conventional farming systems in South Africa’s Southern Cape

With the world’s growing population and limited natural resources, there is a need to produce more food using less inputs. A major limiting factor to meeting the agricultural production needs of the growing population is fresh water. Water is a critical resource in agriculture and may be more of a limiting factor than other crop growth requirements in some areas. Furthermore, water availability is being impacted by climate change and competition from other industries. Methods of improving crop water use efficiency through conservation of water and the enhancement of crop growth need to be employed to meet the growing demand sustainably. The purpose of the research was to assess the differences in soil water status between organically farmed crops with a grass mulch and conventionally farmed crops without mulch, with a view to making more efficient use of the water resource. This research was conducted at the Mandela long term organic farming systems research trial site at Nelson Mandela University, George campus in the southern Cape, South Africa. It is part of a larger research project (the Mandela Trials) in which various researchers have been involved in different aspects of this trial including agronomy, microbiology and pest and disease control. This research took place over two seasons, namely, 2016-2017 season and 2017-2018 season. The soil water content (SWC) of organic and conventional plots were measured using fixed capacitance probes that recorded continuous data, every half hour, at depths of 10, 30 and 50 cm. A handheld theta probe was also used to measure the SWC in the top 6 cm of the soil at 7 to14 day intervals. The organic treatment had a significantly higher SWC than the conventional treatment over the two seasons in which this research was conducted. In addition, soil carbon was significantly higher in the organic treatment, than the conventional. Organic farming methods preserve and promote an increase in soil organic matter, thus improving the soil structure and increasing the soil’s water holding capacity. From this research, it is concluded that organic farming practices can be used to help conserve SWC, keeping it available to crops for longer and helping farmers make more efficient use of this scarce resource. This is especially relevant for low rainfall areas which are affected by water shortages. The improved SWC availability should be coupled with good agronomic practices to increase productive water losses and the conversion of water to yields, thus increasing water use efficiency. In addition, adding organic matter to the soil will improve resilience of the soil and help sequester carbon and thus help in mitigating climate change

Genetically Engineered Triple MAPT-Mutant Human-Induced Pluripotent Stem Cells (N279K, P301L, and E10+16 Mutations) Exhibit Impairments in Mitochondrial Bioenergetics and Dynamics.

Pathological abnormalities in the tau protein give rise to a variety of neurodegenerative diseases, conjointly termed tauopathies. Several tau mutations have been identified in the tau-encoding gene MAPT, affecting either the physical properties of tau or resulting in altered tau splicing. At early disease stages, mitochondrial dysfunction was highlighted with mutant tau compromising almost every aspect of mitochondrial function. Additionally, mitochondria have emerged as fundamental regulators of stem cell function. Here, we show that compared to the isogenic wild-type triple MAPT-mutant human-induced pluripotent stem cells, bearing the pathogenic N279K, P301L, and E10+16 mutations, exhibit deficits in mitochondrial bioenergetics and present altered parameters linked to the metabolic regulation of mitochondria. Moreover, we demonstrate that the triple tau mutations disturb the cellular redox homeostasis and modify the mitochondrial network morphology and distribution. This study provides the first characterization of disease-associated tau-mediated mitochondrial impairments in an advanced human cellular tau pathology model at early disease stages, ranging from mitochondrial bioenergetics to dynamics. Consequently, comprehending better the influence of dysfunctional mitochondria on the development and differentiation of stem cells and their contribution to disease progression may thus assist in the potential prevention and treatment of tau-related neurodegeneration.Partial funding for open access charge: Universidad de Málag

Controlling solute channel formation using magnetic fields

Solute channel formation introduces compositional and microstructural variations in a range of processes, from metallic alloy solidification, to salt fingers in ocean and water reservoir flows. Applying an external magnetic field interacts with thermoelectric currents at solid/liquid interfaces generating additional flow fields. This thermoelectric (TE) magnetohydrodynamic (TEMHD) effect can impact on solute channel formation, via a mechanism recently drawing increasing attention. To investigate this phenomenon, we combined in situ synchrotron X-ray imaging and Parallel-Cellular-Automata-Lattice-Boltzmann based numerical simulations to study the characteristics of flow and solute transport under TEMHD. Observations suggest the macroscopic TEMHD flow appearing ahead of the solidification front, coupled with the microscopic TEMHD flow arising within the mushy zone are the primary mechanisms controlling plume migration and channel bias. Two TE regimes were revealed, each with distinctive mechanisms that dominate the flow. Further, we show that grain orientation modifies solute flow through anisotropic permeability. These insights led to a proposed strategy for producing solute channel-free solidification using a time-modulated magnetic field

Evolutionary and genomic insights into Clostridioides difficile sequence type 11: A diverse zoonotic and antimicrobial-resistant lineage of global One Health importance

Clostridioides difficile (Clostridium difficile) sequence type 11 (ST11) is well established in production animal populations worldwide and contributes considerably to the global burden of C. difficile infection (CDI) in humans. Increasing evidence of shared ancestry and genetic overlap of PCR ribotype 078 (RT078), the most common ST11 sublineage, between human and animal populations suggests that CDI may be a zoonosis. We performed whole-genome sequencing (WGS) on a collection of 207 ST11 and closely related ST258 isolates of human and veterinary/environmental origin, comprising 16 RTs collected from Australia, Asia, Europe, and North America. Core genome single nucleotide variant (SNV) analysis identified multiple intraspecies and interspecies clonal groups (isolates separated by ≤2 core genome SNVs) in all the major RT sublineages: 078, 126, 127, 033, and 288. Clonal groups comprised isolates spread across different states, countries, and continents, indicative of reciprocal long-range dissemination and possible zoonotic/anthroponotic transmission. Antimicrobial resistance genotypes and phenotypes varied across host species, geographic regions, and RTs and included macrolide/lincosamide resistance (Tn6194 [ermB]), tetracycline resistance (Tn6190 [tetM] and Tn6164 [tet44]), and fluoroquinolone resistance (gyrA/B mutations), as well as numerous aminoglycoside resistance cassettes. The population was defined by a large “open” pan-genome (10,378 genes), a remarkably small core genome of 2,058 genes (only 19.8% of the gene pool), and an accessory genome containing a large and diverse collection of important prophages of the Siphoviridae and Myoviridae. This study provides novel insights into strain relatedness and genetic variability of C. difficile ST11, a lineage of global One Health importance. IMPORTANCE: Historically, Clostridioides difficile (Clostridium difficile) has been associated with life-threatening diarrhea in hospitalized patients. Increasing rates of C. difficile infection (CDI) in the community suggest exposure to C. difficile reservoirs outside the hospital, including animals, the environment, or food. C. difficile sequence type 11 (ST11) is known to infect/colonize livestock worldwide and comprises multiple ribotypes, many of which cause disease in humans, suggesting CDI may be a zoonosis. Using high-resolution genomics, we investigated the evolution and zoonotic potential of ST11 and a new closely related ST258 lineage sourced from diverse origins. We found multiple intra- and interspecies clonal transmission events in all ribotype sublineages. Clones were spread across multiple continents, often without any health care association, indicative of zoonotic/anthroponotic long-range dissemination in the community. ST11 possesses a massive pan-genome and numerous clinically important antimicrobial resistance elements and prophages, which likely contribute to the success of this globally disseminated lineage of One Health importance

The costs of introducing artemisinin-based combination therapy: evidence from district-wide implementation in rural Tanzania

BACKGROUND\ud \ud The development of antimalarial drug resistance has led to increasing calls for the introduction of artemisinin-based combination therapy (ACT). However, little evidence is available on the full costs associated with changing national malaria treatment policy. This paper presents findings on the actual drug and non-drug costs associated with deploying ACT in one district in Tanzania, and uses these data to estimate the nationwide costs of implementation in a setting where identification of malaria cases is primarily dependant on clinical diagnosis.\ud \ud METHODS\ud \ud Detailed data were collected over a three year period on the financial costs of providing ACT in Rufiji District as part of a large scale effectiveness evaluation, including costs of drugs, distribution, training, treatment guidelines and other information, education and communication (IEC) materials and publicity. The district-level costs were scaled up to estimate the costs of nationwide implementation, using four scenarios to extrapolate variable costs.\ud \ud RESULTS\ud \ud The total district costs of implementing ACT over the three year period were slightly over one million USD, with drug purchases accounting for 72.8% of this total. The composite (best) estimate of nationwide costs for the first three years of ACT implementation was 48.3 million USD (1.29 USD per capita), which varied between 21 and 67.1 million USD in the sensitivity analysis (2003 USD). In all estimates drug costs constituted the majority of total costs. However, non-drug costs such as IEC materials, drug distribution, communication, and health worker training were also substantial, accounting for 31.4% of overall ACT implementation costs in the best estimate scenario. Annual implementation costs are equivalent to 9.5% of Tanzania's recurrent health sector budget, and 28.7% of annual expenditure on medical supplies, implying a 6-fold increase in the national budget for malaria treatment.\ud \ud CONCLUSION\ud \ud The costs of implementing ACT are substantial. Although drug purchases constituted a majority of total costs, non-drug costs were also considerable. It is clear that substantial external resources will be required to facilitate and sustain effective ACT delivery across Tanzania and other malaria-endemic countries

A Multilaboratory Comparison of Calibration Accuracy and the Performance of External References in Analytical Ultracentrifugation

Analytical ultracentrifugation (AUC) is a first principles based method to determine absolute sedimentation coefficients and buoyant molar masses of macromolecules and their complexes, reporting on their size and shape in free solution. The purpose of this multi-laboratory study was to establish the precision and accuracy of basic data dimensions in AUC and validate previously proposed calibration techniques. Three kits of AUC cell assemblies containing radial and temperature calibration tools and a bovine serum albumin (BSA) reference sample were shared among 67 laboratories, generating 129 comprehensive data sets. These allowed for an assessment of many parameters of instrument performance, including accuracy of the reported scan time after the start of centrifugation, the accuracy of the temperature calibration, and the accuracy of the radial magnification. The range of sedimentation coefficients obtained for BSA monomer in different instruments and using different optical systems was from 3.655 S to 4.949 S, with a mean and standard deviation of (4.304 ± 0.188) S (4.4%). After the combined application of correction factors derived from the external calibration references for elapsed time, scan velocity, temperature, and radial magnification, the range of s-values was reduced 7-fold with a mean of 4.325 S and a 6-fold reduced standard deviation of ± 0.030 S (0.7%). In addition, the large data set provided an opportunity to determine the instrument-to-instrument variation of the absolute radial positions reported in the scan files, the precision of photometric or refractometric signal magnitudes, and the precision of the calculated apparent molar mass of BSA monomer and the fraction of BSA dimers. These results highlight the necessity and effectiveness of independent calibration of basic AUC data dimensions for reliable quantitative studies

A Multilaboratory Comparison of Calibration Accuracy and the Performance of External References in Analytical Ultracentrifugation

Analytical ultracentrifugation (AUC) is a first principles based method to determine absolute sedimentation coefficients and buoyant molar masses of macromolecules and their complexes, reporting on their size and shape in free solution. The purpose of this multi-laboratory study was to establish the precision and accuracy of basic data dimensions in AUC and validate previously proposed calibration techniques. Three kits of AUC cell assemblies containing radial and temperature calibration tools and a bovine serum albumin (BSA) reference sample were shared among 67 laboratories, generating 129 comprehensive data sets. These allowed for an assessment of many parameters of instrument performance, including accuracy of the reported scan time after the start of centrifugation, the accuracy of the temperature calibration, and the accuracy of the radial magnification. The range of sedimentation coefficients obtained for BSA monomer in different instruments and using different optical systems was from 3.655 S to 4.949 S, with a mean and standard deviation of (4.304 ± 0.188) S (4.4%). After the combined application of correction factors derived from the external calibration references for elapsed time, scan velocity, temperature, and radial magnification, the range of s-values was reduced 7-fold with a mean of 4.325 S and a 6-fold reduced standard deviation of ± 0.030 S (0.7%). In addition, the large data set provided an opportunity to determine the instrument-to-instrument variation of the absolute radial positions reported in the scan files, the precision of photometric or refractometric signal magnitudes, and the precision of the calculated apparent molar mass of BSA monomer and the fraction of BSA dimers. These results highlight the necessity and effectiveness of independent calibration of basic AUC data dimensions for reliable quantitative studies