3,701 research outputs found
Some Social Characteristics of the South
Date is unknownhttps://egrove.olemiss.edu/civ_pubs/1030/thumbnail.jp
Contractor point of view for system development and test program
Industry's practice of testing space qualified hardware is examined. An overview of the Global Positioning System (GPS) Test Program is discussed from the component level to the sub-system compatibility tests with the space vehicle and finally to the launch site tests, all related to the Rubidium clock
Recommended from our members
Comparative study of design: application to Engineering Design
A recent exploratory study examines design processes across domains and compares them. This is achieved through a series of interdisciplinary, participative workshops. A systematic framework is used to collect data from expert witnesses who are practising designers across domains from engineering through architecture to product design and fashion, including film production, pharmaceutical drugs, food, packaging, graphics and multimedia and software. Similarities and differences across domains are described which indicate the types of comparative analysis we have been able to do from our data. The paper goes further and speculates on possible lessons for selected areas of engineering design which can be drawn from comparison with processes in other domains. As such this comparative design study offers the potential for improving engineering design processes. More generally it is a first step in creating a discipline of comparative design which aims to provide a new rich picture of design processes
Normal and Tangential Momentum Accommodation for Earth Satellite Conditions
Momentum accommodation was determined experimentally for gas-surface interactions simulating in a practical way those of near-earth satellites. Throughout the ranges of gas energies and incidence angles of interest for earth-conditions, two components of force were measured by means of a vacuum microbalance to determine the normal and tangential momentum-accommodation coefficients for nitrogen ions on technical-quality aluminum surfaces. For these experimental conditions, the electrodynamics of ion neutralization near the surface indicate that results for nitrogen ions should differ relatively little from those for nitrogen molecules, which comprise the largest component of momentum flux for near-earth satellites. The experimental results indicated that both normal and tangential momentum-accommodation coefficients varied widely with energy, tending to be relatively well accommodated at the higher energies, but becoming progressively less accommodated as the energy was reduced to and below that for earth-satellite speeds. Both coefficients also varied greatly with incidence angle, the normal momentum becoming less accommodated as the incidence angle became more glancing, whereas the tangential momentum generally became more fully accommodated. For each momentum coefficient, an empirical correlation function was obtained which closely approximated the experimental results over the ranges of energy and incidence angle. Most of the observed variations of momentum accommodation with energy and incidence angle were qualitatively indicated by a calculation using a three-dimensional model that simulated the target surface by a one-dimensional attractive potential and hard sphere reflectors
Flutter Analysis of the Thermal Protection Layer on the NASA HIAD
A combination of classical plate theory and a supersonic aerodynamic model is used to study the aeroelastic flutter behavior of a proposed thermal protection system (TPS) for the NASA HIAD. The analysis pertains to the rectangular configurations currently being tested in a NASA wind-tunnel facility, and may explain why oscillations of the articles could be observed. An analysis using a linear flat plate model indicated that flutter was possible well within the supersonic flow regime of the wind tunnel tests. A more complex nonlinear analysis of the TPS, taking into account any material curvature present due to the restraint system or substructure, indicated that significantly greater aerodynamic forcing is required for the onset of flutter. Chaotic and periodic limit cycle oscillations (LCOs) of the TPS are possible depending on how the curvature is imposed. When the pressure from the base substructure on the bottom of the TPS is used as the source of curvature, the flutter boundary increases rapidly and chaotic behavior is eliminated
Profit-maximizing plans for soil-conserving farming in the spring valley creek watershed in Southwest Iowa
The purpose of this study is to determine whether farmers in the Spring Valley Creek Watershed in Mills County, Iowa, can profitably conserve their soil to an increased extent. These farmers presently fall far short of conservation goals of public agencies. Although the conservation goals are stated in terms of preventing loss of topsoil, closely related problems of gullying, flooding and channel siltation are important. Solution of these interrelated problems is stressed by the activities of various governmental agencies. The need for control of the headwaters and tributary streams was recognized in Public Law 566-the Small Watershed Act. The limited funds made available under this act are used in building structures and in encouraging local participation in projects for controlling soil and water erosion.
This study is part of an investigation of alternative water-control measures in a particular watershed. In the watershed studied, no concerted action has been taken by the group of farmers to organize under Public Law 566. Hence, the research is expected to be useful in directing actions of farmers in this watershed, and similar watersheds, for deciding whether or not to participate in the Small Watershed Program. The questions toward which this research is directed are: Can farmers in the Spring Valley Creek Watershed in southwest Iowa, where soil is easily eroded, profitably adjust their farming operations to conserve their soil at recommended levels? Or, does a lack of possibility to improve farm income under conservation farming methods require participation in, and subsidy from, public watershed programs
Efficient growth of complex graph states via imperfect path erasure
Given a suitably large and well connected (complex) graph state, any quantum
algorithm can be implemented purely through local measurements on the
individual qubits. Measurements can also be used to create the graph state:
Path erasure techniques allow one to entangle multiple qubits by determining
only global properties of the qubits. Here, this powerful approach is extended
by demonstrating that even imperfect path erasure can produce the required
graph states with high efficiency. By characterizing the degree of error in
each path erasure attempt, one can subsume the resulting imperfect entanglement
into an extended graph state formalism. The subsequent growth of the improper
graph state can be guided, through a series of strategic decisions, in such a
way as to bound the growth of the error and eventually yield a high-fidelity
graph state. As an implementation of these techniques, we develop an analytic
model for atom (or atom-like) qubits in mismatched cavities, under the
double-heralding entanglement procedure of Barrett and Kok [Phys. Rev. A 71,
060310 (2005)]. Compared to straightforward postselection techniques our
protocol offers a dramatic improvement in growing complex high-fidelity graph
states.Comment: 15 pages, 10 figures (which print to better quality than when viewed
as an on screen pdf
In-Flight Aeroelastic Stability of the Thermal Protection System on the NASA HIAD, Part I: Linear Theory
Conical shell theory and piston theory aerodynamics are used to study the aeroelastic stability of the thermal protection system (TPS) on the NASA Hypersonic Inflatable Aerodynamic Decelerator (HIAD). Structural models of the TPS consist of single or multiple orthotropic conical shell systems resting on several circumferential linear elastic supports. The shells in each model may have pinned (simply-supported) or elastically-supported edges. The Lagrangian is formulated in terms of the generalized coordinates for all displacements and the Rayleigh-Ritz method is used to derive the equations of motion. The natural modes of vibration and aeroelastic stability boundaries are found by calculating the eigenvalues and eigenvectors of a large coefficient matrix. When the in-flight configuration of the TPS is approximated as a single shell without elastic supports, asymmetric flutter in many circumferential waves is observed. When the elastic supports are included, the shell flutters symmetrically in zero circumferential waves. Structural damping is found to be important in this case. Aeroelastic models that consider the individual TPS layers as separate shells tend to flutter asymmetrically at high dynamic pressures relative to the single shell models. Several parameter studies also examine the effects of tension, orthotropicity, and elastic support stiffness
In-Flight Aeroelastic Stability of the Thermal Protection System on the NASA HIAD, Part II: Nonlinear Theory and Extended Aerodynamics
Conical shell theory and a supersonic potential flow aerodynamic theory are used to study the nonlinear pressure buckling and aeroelastic limit cycle behavior of the thermal protection system for NASA's Hypersonic Inflatable Aerodynamic Decelerator. The structural model of the thermal protection system consists of an orthotropic conical shell of the Donnell type, resting on several circumferential elastic supports. Classical Piston Theory is used initially for the aerodynamic pressure, but was found to be insufficient at low supersonic Mach numbers. Transform methods are applied to the convected wave equation for potential flow, and a time-dependent aerodynamic pressure correction factor is obtained. The Lagrangian of the shell system is formulated in terms of the generalized coordinates for all displacements and the Rayleigh-Ritz method is used to derive the governing differential-algebraic equations of motion. Aeroelastic limit cycle oscillations and buckling deformations are calculated in the time domain using a Runge-Kutta method in MATLAB. Three conical shell geometries were considered in the present analysis: a 3-meter diameter 70 deg. cone, a 3.7-meter 70 deg. cone, and a 6-meter diameter 70 deg. cone. The 6-meter configuration was loaded statically and the results were compared with an experimental load test of a 6-meter HIAD. Though agreement between theoretical and experimental strains was poor, the circumferential wrinkling phenomena observed during the experiments was captured by the theory and axial deformations were qualitatively similar in shape. With Piston Theory aerodynamics, the nonlinear flutter dynamic pressures of the 3-meter configuration were in agreement with the values calculated using linear theory, and the limit cycle amplitudes were generally on the order of the shell thickness. The effect of axial tension was studied for this configuration, and increasing tension was found to decrease the limit cycle amplitudes when the circumferential elastic supports were neglected, but resulted in more complex behavior when the supports were included. The nominal flutter dynamic pressure of the 3.7-meter configuration was significantly lower than that of the 3-meter, and it was found that two sets of natural modes coalesce to flutter modes near the same dynamic pressure. This resulted in a significant drop in the limit cycle frequencies at higher dynamic pressures, where the flutter mode with the lower frequency becomes more critical. Pre-buckling pressure loads and the aerodynamic pressure correction factor were studied for all geometries, and these effects resulted in significantly lower flutter boundaries compared with Piston Theory alone. The maximum dynamic pressure predicted by aerodynamic simulations of a proposed 3.7-meter HIAD vehicle was still lower than any of the calculated flutter dynamic pressures, suggesting that aeroelastic effects for this vehicle are of little concern
Nonlinear Aeroelastic Analysis of the HIAD TPS Coupon in the NASA 8' High Temperature Tunnel: Theory and Experiment
The purpose of this work is to develop a set of theoretical and experimental techniques to characterize the aeroelasticity of the thermal protection system (TPS) on the NASA Hypersonic Inflatable Aerodynamic Decelerator (HIAD). A square TPS coupon experiences trailing edge oscillatory behavior during experimental testing in the 8' High Temperature Tunnel (HTT), which may indicate the presence of aeroelastic flutter. Several theoretical aeroelastic models have been developed, each corresponding to a different experimental test configuration. Von Karman large deflection theory is used for the plate-like components of the TPS, along with piston theory for the aerodynamics. The constraints between the individual TPS layers and the presence of a unidirectional foundation at the back of the coupon are included by developing the necessary energy expressions and using the Rayleigh Ritz method to derive the nonlinear equations of motion. Free vibrations and limit cycle oscillations are computed and the frequencies and amplitudes are compared with accelerometer and photogrammetry data from the experiments
- …