Mineralogical and geochemical analysis of Fe-phases in drill-cores from the Triassic Stuttgart Formation at Ketzin CO₂ storage site before CO₂ arrival

Reactive iron (Fe) oxides and sheet silicate-bound Fe in reservoir rocks may affect the subsurface storage of CO2 through several processes by changing the capacity to buffer the acidification by CO2 and the permeability of the reservoir rock: (1) the reduction of three-valent Fe in anoxic environments can lead to an increase in pH, (2) under sulphidic conditions, Fe may drive sulphur cycling and lead to the formation of pyrite, and (3) the leaching of Fe from sheet silicates may affect silicate diagenesis. In order to evaluate the importance of Fe-reduction on the CO2 reservoir, we analysed the Fe geochemistry in drill-cores from the Triassic Stuttgart Formation (Schilfsandstein) recovered from the monitoring well at the CO2 test injection site near Ketzin, Germany. The reservoir rock is a porous, poorly to moderately cohesive fluvial sandstone containing up to 2–4 wt% reactive Fe. Based on a sequential extraction, most Fe falls into the dithionite-extractable Fe-fraction and Fe bound to sheet silicates, whereby some Fe in the dithionite-extractable Fe-fraction may have been leached from illite and smectite. Illite and smectite were detected in core samples by X-ray diffraction and confirmed as the main Fe-containing mineral phases by X-ray absorption spectroscopy. Chlorite is also present, but likely does not contribute much to the high amount of Fe in the silicate-bound fraction. The organic carbon content of the reservoir rock is extremely low (<0.3 wt%), thus likely limiting microbial Fe-reduction or sulphate reduction despite relatively high concentrations of reactive Fe-mineral phases in the reservoir rock and sulphate in the reservoir fluid. Both processes could, however, be fuelled by organic matter that is mobilized by the flow of supercritical CO2 or introduced with the drilling fluid. Over long time periods, a potential way of liberating additional reactive Fe could occur through weathering of silicates due to acidification by CO2

Guidelines for cost-effective implementation of picture archiving and communication systems an approach building on practical experiences in three European hospitals

This paper describes a comprehensive approach for the assessment of the impact of (partial) Picture Archiving and Communication Systems (PACS). The approach is developed, based on actual clinical experience in three European hospitals and tested in these environments. The approach departs from a thorough analysis of the working procedures and information flows before implementation, both descriptive and quantitative. On the basis of this analysis, quantitative (and hence testable) objectives of the implementation are defined. The implementation strategy is defined after comparison of various scenarios, taking costs and effects for both the final and the transition phases into account. The approach is supported by a comprehensive evaluation protocol and a software package (PACER). The approach is demonstrated in this paper by applying it on a hypothetical PACS implementation for CT, ultrasound and for the part of the radiology department serving ICU. The objectives of this PACS are: (1) - to shorten the turn around time between the radiology department and ICU from 4 h to 30 min, (2) - to save 2000 m2 of film per year and (3) - to save personnel time. In this case the PACS is introduced in three phases and completed after three years. The cost analysis shows that, if started in 1995, a Financial break even point is reached after 6 years, when comparing costs for the film-based system with those of the PACS. Experiences in the three sites show that the approach helps to harvest potential benefits, allowing a cost-effective implementation of PACS.SCOPUS: ar.jinfo:eu-repo/semantics/publishe