Characteristics of alpha projectile fragments emission in interaction of nuclei with emulsion

The properties of the relativistic alpha fragments produced in interactions of 84^Kr at around 1 A GeV in nuclear emulsion are investigated. The experimental results are compared with the similar results obtained from various projectiles with emulsion interactions at different energies. The total, partial nuclear cross-sections and production rates of alpha fragmentation channels in relativistic nucleus-nucleus collisions and their dependence on the mass number and initial energy of the incident projectile nucleus are investigated. The yields of multiple alpha fragments emitted from the interactions of projectile nuclei with the nuclei of light, medium and heavy target groups of emulsion-detector are discussed and they indicate that the projectile-breakup mechanism seems to be free from the target mass number. It is found that the multiplicity distributions of alpha fragments are well described by the Koba-Nielsen-Olesen (KNO) scaling presentation. The mean multiplicities of the freshly produced newly created charged secondary particles, normally known as shower and secondary particles associated with target in the events where the emission of alpha fragments were accompanied by heavy projectile fragments having Z value larger than 4 seem to be constant as the alpha fragments multiplicity increases, and exhibit a behavior independent of the alpha fragments multiplicity.Comment: 33 pages, 8 figures and 3 tables (in press

The histone chaperones Nap1 and Vps75 bind histones H3 and H4 in a tetrameric conformation

Histone chaperones physically interact with histones to direct proper assembly and disassembly of nucleosomes regulating diverse nuclear processes such as DNA replication, promoter remodeling, transcription elongation, DNA damage, and histone variant exchange. Currently, the best-characterized chaperone-histone interaction is that between the ubiquitous chaperone Asf1 and a dimer of H3 and H4. Nucleosome assembly proteins (Nap proteins) represent a distinct class of histone chaperone. Using pulsed electron double resonance (PELDOR) measurements and protein crosslinking, we show that two members of this class, Nap1 and Vps75, bind histones in the tetrameric conformation also observed when they are sequestered within the nucleosome. Furthermore, H3 and H4 trapped in their tetrameric state can be used as substrates in nucleosome assembly and chaperone-mediated lysine acetylation. This alternate mode of histone interaction provides a potential means of maintaining the integrity of the histone tetramer during cycles of nucleosome reassembly

Helium bubble formation in ultrafine and nanocrystalline tungsten under different extreme conditions

We have investigated the effects of helium ion irradiation energy and sample temperature on the performance of grain boundaries as helium sinks in ultrafine grained and nanocrystalline tungsten. Irradiations were performed at displacement and non-displacement energies and at temperatures above and below that required for vacancy migration. Microstructural investigations were performed using Transmission Electron Microscopy (TEM) combined with either in-situ or ex-situ ion irradiation. Under helium irradiation at an energy which does not cause atomic displacements in tungsten (70 eV), regardless of temperature and thus vacancy migration conditions, bubbles were uniformly distributed with no preferential bubble formation on grain boundaries. At energies that can cause displacements, bubbles were observed to be preferentially formed on the grain boundaries only at high temperatures where vacancy migration occurs. Under these conditions, the decoration of grain boundaries with large facetted bubbles occurred on nanocrystalline grains with dimensions less than 60 nm. We discuss the importance of vacancy supply and the formation and migration of radiation-induced defects on the performance of grain boundaries as helium sinks and the resulting irradiation tolerance of ultrafine grained and nanocrystalline tungsten to bubble formatio

Emergency Management of Hypertension in Children

Systemic arterial hypertension in children has traditionally been thought to be secondary in origin. Increased incidence of risk factors like obesity, sedentary life-styles, and faulty dietary habits has led to increased prevalence of the primary arterial hypertension (PAH), particularly in adolescent age children. PAH has become a global epidemic worldwide imposing huge economic constraint on health care. Sudden acute increase in systolic and diastolic blood pressure can lead to hypertensive crisis. While it generally pertains to secondary hypertension, occurrence of hypertensive crisis in PAH is however rare in children. Hypertensive crisis has been further subclassified depending on presence or absence of end-organ damage into hypertensive emergency or urgency. Both hypertensive emergencies and urgencies are known to cause significant morbidity and mortality. Increasing awareness among the physicians, targeted at investigation of the pathophysiology of hypertension and its complications, better screening methods, generation, and implementation of novel treatment modalities will impact overall outcomes. In this paper, we discuss the etiology, pathogenesis, and management of hypertensive crisis in children. An extensive database search using keywords was done to obtain the information

Silodosin oral films: Development, physico-mechanical properties and in vitro dissolution studies in simulated saliva

Sublingual film dosage forms for drugs used for fast symptomatic treatment have promise because they allow a rapid onset of action. The aim of this study was to prepare films of silodosin intended for sublingual administration for the symptomatic treatment of benign prostatic hyperplasia in men. Hydroxypropyl methylcellulose (HPMC) or hydroxypropyl methylcellulose acetate succinate (HPMC-AS) were used as film-forming polymers. The effects of the polymers and the surfactant tocopherol polyethylene glycol succinate (TPGS) on the physico-mechanical properties and dissolution behavior of the films in simulated saliva were investigated. The eight silodosin oral films developed (F1–F8) contained 8 mg silodosin per 6 cm2 film and HPMC or HPMC-AS in drug:polymer ratios of 1:5 or 1:3, while four also contained TPGS (0.5% w/w). The films were characterized using DSC, TGA, SEM, and PXRD and the mechanical properties were investigated by measuring tensile strength, elongation at break and Young's modulus. The mechanical properties of the films were dependent on the ratio of polymer used. The in vitro dissolution and drug release studies indicated that HPMC-AS films disintegrated more quickly than HPMC films. Silodosin was shown to be dispersed within the polymers. Despite silodosin being submicronized in the HPMC films, the dissolution and drug release rate (time for 80% release) from HPMC films was significantly faster than from HPMC-AS films. TPGS increased the drug release rate to a greater extent with HPMC than with HPMC-AS. The degree of saturation of formulation F4 was >1, which shows potential for improving oral absorption of silodosin.Peer reviewe

Improving the scalability of parallel N-body applications with an event driven constraint based execution model

The scalability and efficiency of graph applications are significantly constrained by conventional systems and their supporting programming models. Technology trends like multicore, manycore, and heterogeneous system architectures are introducing further challenges and possibilities for emerging application domains such as graph applications. This paper explores the space of effective parallel execution of ephemeral graphs that are dynamically generated using the Barnes-Hut algorithm to exemplify dynamic workloads. The workloads are expressed using the semantics of an Exascale computing execution model called ParalleX. For comparison, results using conventional execution model semantics are also presented. We find improved load balancing during runtime and automatic parallelism discovery improving efficiency using the advanced semantics for Exascale computing.Comment: 11 figure

Possible Overestimation of Nitrogen Dioxide Outgassing during the Beirut 2020 Explosion

On 4 August 2020, a strong explosion occurred near the Beirut seaport, Lebanon and killed more than 200 people and damaged numerous buildings in the vicinity. As Amonium Nitrate (AN) caused the explosion, many studies claimed the release of large amounts of NO2 in the atmosphere may have resulted in a health hazard in Beirut and the vicinity. In order to reasonably evaluate the significance of NO2 amounts released in the atmosphere, it is important to investigate the spatio-temporal distribution of NO2 during and after the blast and compare it to the average day-to-day background emissions from vehicle and ship traffic in Beirut. In the present study, we use Sentinel-5 TROPOMI data to study NO2 emissions in the atmosphere close to the affected area prior, during, and after the Beirut explosion (28 July–8 August 2020). Analysis shows an increase in NO2 concentrations over Beirut up to about 1.8 mol/m2 one day after the explosion that was gradually dissipated in about 4 days. Seven days before the blast (on 28 July 2020) NO2 concentration was, however, observed to be up to about 4.3 mol/m2 over Beirut, which is mostly attributed to vehicle emissions in Lebanon, ships passing by the Beirut seaport and possibly the militant activities in Syria during 20–26 July. It is found that the Beirut blast caused a temporarily and spatially limited increase in NO2. The blast mostly affected the coastal areas in Lebanon, while it did not have much effect on inland regions. TROPOMI data are also analyzed for the Greater Cairo Area (GCA), Suez Canal, Egypt, and in Nicosia, Cyprus to confirm the effect of human activities, vehicles, and ship traffic on NO2 emissions in relatively high and relatively low populated zones

Bio-inspired Tensegrity Soft Modular Robots

In this paper, we introduce a design principle to develop novel soft modular robots based on tensegrity structures and inspired by the cytoskeleton of living cells. We describe a novel strategy to realize tensegrity structures using planar manufacturing techniques, such as 3D printing. We use this strategy to develop icosahedron tensegrity structures with programmable variable stiffness that can deform in a three-dimensional space. We also describe a tendon-driven contraction mechanism to actively control the deformation of the tensegrity mod-ules. Finally, we validate the approach in a modular locomotory worm as a proof of concept.Comment: 12 pages, 7 figures, submitted to Living Machine conference 201