Improved bore-sight calibration for airborne light detection and ranging using planar patches

This article proposes an improved method for bore-sight calibration based on the principles of symmetry of coordinate offsets and low correlations between bore-sight angles

Effect of knit and print parameters on peel strength of hybrid 3-D printed textiles

The influence of knit fabric structure on the adhesion of three-dimensional (3-D) printed textiles was examined. 3-Dprinting was applied to different elastic knitted fabrics with different amounts of prestretch, typical for 4-D fabric construction. The quality of the bond was measured in terms of peel strength. Peel strength was measured by pulling the fabric at 180 degrees from the printed plastic to delaminate the 2 and recording the 10 highest peak values observed during the test. The printed width, the ratio of fabric width of print width, fabric washing, and fabric structure were varied. The specimens were then evaluated for peel strength

Regulatory T cells can prevent memory CD8+ T-cell-mediated rejection following polymorphonuclear cell depletion

Accumulating evidence suggests that alloreactive memory T cells (Tm) may form a barrier to tolerance induction in large animals and humans due in part to a resistance to suppression by Treg. However, why Tm are resistant to regulation and how the Tm response to an allograft differs from that of naïve T cells, which are amenable to suppression by Treg, remains unknown. Here, we show that accelerated graft rejection mediated by CD8+ Tm was due to the enhanced recruitment of PMN to allografts in a mouse skin allograft model. Importantly, depletion of PMN slowed the kinetics of (but did not prevent) rejection mediated by Tm and created a window of opportunity that allowed subsequent suppression of rejection by Treg. Taken together, we conclude that CD8+ Tm are not intrinsically resistant to suppression by Treg but may rapidly inflict substantial graft damage before the establishment of regulatory mechanisms. These data suggest that if Tm responses can be attenuated transiently following transplantation, Treg may be able to maintain tolerance through the suppression of both memory and naïve alloreactive T-cell responses in the long term

Measurement of real-time tissue elastography in a phantom model and comparison with transient elastography in pediatric patients with liver diseases

PURPOSEWe aimed to determine the comparability of real-time tissue elastography (RTE) and transient elastography (TE) in pediatric patients with liver diseases. MATERIALS AND METHODSRTE was performed on the Elasticity QA Phantom Model 049 (Computerized Imaging Reference Systems Company Inc., Norfolk, Virginia, USA), which has five areas with different levels of stiffness. RTE measurements of relative stiffness (MEAN [mean value of tissue elasticity], AREA [% of blue color-coded stiffer tissue]) in the phantom were compared with the phantom stiffness specified in kPa (measurement unit of TE). RTE and TE were performed on 147 pediatric patients with various liver diseases. A total of 109 measurements were valid. The participants had following diseases: metabolic liver disease (n=25), cystic fibrosis (n=20), hepatopathy of unknown origin (n=11), autoimmune hepatitis (n=12), Wilson’s disease (n=11), and various liver parenchyma alterations (n=30). Correlations between RTE and TE measurements in the patients were calculated. In addition, RTE was performed on a control group (n=30), and the RTE values between the patient and control groups were compared. RESULTSThe RTE parameters showed good correlation in the phantom model with phantom stiffness (MEAN/kPa, r=-0.97; AREA/kPa, r=0.98). However, the correlation of RTE and TE was weak in the patient group (MEAN/kPa, r=-0.23; AREA/kPa, r=0.24). A significant difference was observed between the patient and control groups (MEAN, P = 5.32 e-7; AREA, P = 1.62 e-6). CONCLUSIONIn the phantom model, RTE was correlated with kPa, confirming the presumed comparability of the methods. However, there was no direct correlation between RTE and TE in patients with defined liver diseases under real clinical conditions

Geometric Calibration and Radiometric Correction of LiDAR Data and Their Impact on the Quality of Derived Products

LiDAR (Light Detection And Ranging) systems are capable of providing 3D positional and spectral information (in the utilized spectrum range) of the mapped surface. Due to systematic errors in the system parameters and measurements, LiDAR systems require geometric calibration and radiometric correction of the intensity data in order to maximize the benefit from the collected positional and spectral information. This paper presents a practical approach for the geometric calibration of LiDAR systems and radiometric correction of collected intensity data while investigating their impact on the quality of the derived products. The proposed approach includes the use of a quasi-rigorous geometric calibration and the radar equation for the radiometric correction of intensity data. The proposed quasi-rigorous calibration procedure requires time-tagged point cloud and trajectory position data, which are available to most of the data users. The paper presents a methodology for evaluating the impact of the geometric calibration on the relative and absolute accuracy of the LiDAR point cloud. Furthermore, the impact of the geometric calibration and radiometric correction on land cover classification accuracy is investigated. The feasibility of the proposed methods and their impact on the derived products are demonstrated through experimental results using real data

Ribbon Crystals

A repetitive crystal-like pattern is spontaneously formed upon the twisting of straight ribbons. The pattern is akin to a tessellation with isosceles triangles, and it can easily be demonstrated with ribbons cut from an overhead transparency. We give a general description of developable ribbons using a ruled procedure where ribbons are uniquely described by two generating functions. This construction defines a differentiable frame, the ribbon frame, which does not have singular points, whereby we avoid the shortcomings of the Frenet-Serret frame. The observed spontaneous pattern is modeled using planar triangles and cylindrical arcs, and the ribbon structure is shown to arise from a maximization of the end-to-end length of the ribbon, i.e. from an optimal use of ribbon length. The phenomenon is discussed in the perspectives of incompatible intrinsic geometries and of the emergence of long-range order

Couplings of light I=0 scalar mesons to simple operators in the complex plane

The flavour and glue structure of the light scalar mesons in QCD are probed by studying the couplings of the I=0 mesons $\sigma(600)$ and $f_0(980)$ to the operators $\bar{q}q$, $\alpha_s G^2$ and to two photons. The Roy dispersive representation for the $\pi\pi$ amplitude $t_0^0(s)$ is used to determine the pole positions as well as the residues in the complex plane. On the real axis, $t_0^0$ is constrained to solve the Roy equation together with elastic unitarity up to the K\Kbar threshold leading to an improved description of the $f_0(980)$. The problem of using a two-particle threshold as a matching point is discussed. A simple relation is established between the coupling of a scalar meson to an operator $j_S$ and the value of the related pion form-factor computed at the resonance pole. Pion scalar form-factors as well as two-photon partial-wave amplitudes are expressed as coupled-channel Omn\`es dispersive representations. Subtraction constants are constrained by chiral symmetry and experimental data. Comparison of our results for the $\bar{q}q$ couplings with earlier determinations of the analogous couplings of the lightest I=1 and $I=1/2$ scalar mesons are compatible with an assignment of the $\sigma$, $\kappa$, $a_0(980)$, $f_0(980)$ into a nonet. Concerning the gluonic operator $\alpha_s G^2$ we find a significant coupling to both the $\sigma$ and the $f_0(980)$.Comment: 31 pages, 5 figure

Complex geomorphologic assemblage of terrains in association with the banded terrain in Hellas basin, Mars

Hellas basin acts as a major sink for the southern highlands of Mars and is likely to have recorded several episodes of sedimentation and erosion. The north-western part of the basin displays a potentially unique Amazonian landscape domain in the deepest part of Hellas, called “banded terrain”, which is a deposit characterized by an alternation of narrow band shapes and inter-bands displaying a sinuous and relatively smooth surface texture suggesting a viscous flow origin. Here we use high-resolution (HiRISE and CTX) images to assess the geomorphological interaction of the banded terrain with the surrounding geomorphologic domains in the NW interior of Hellas to gain a better understanding of the geological evolution of the region as a whole. Our analysis reveals that the banded terrain is associated with six geomorphologic domains: a central plateau named Alpheus Colles, plain deposits (P1 and P2), reticulate (RT1 and RT2) and honeycomb terrains. Based on the analysis of the geomorphology of these domains and their cross-cutting relationships, we show that no widespread deposition post-dates the formation of the banded terrain, which implies that this domain is the youngest and latest deposit of the interior of Hellas. Therefore, the level of geologic activity in the NW Hellas during the Amazonian appears to have been relatively low and restricted to modification of the landscape through mechanical weathering, aeolian and periglacial processes. Thermophysical data and cross-cutting relationships support hypotheses of modification of the honeycomb terrain via vertical rise of diapirs such as ice diapirism, and the formation of the plain deposits through deposition and remobilization of an ice-rich mantle deposit. Finally, the observed gradual transition between honeycomb and banded terrain suggests that the banded terrain may have covered a larger area of the NW interior of Hellas in the past than previously thought. This has implications on the understanding of the evolution of the deepest part of Hellas

Reducing AD-Like Pathology in 3xTg-AD Mouse Model by DNA Epitope Vaccine — A Novel Immunotherapeutic Strategy

BACKGROUND: The development of a safe and effective AD vaccine requires a delicate balance between providing an adequate anti-Abeta antibody response sufficient to provide therapeutic benefit, while eliminating an adverse T cell-mediated proinflammatory autoimmune response. To achieve this goal we have designed a prototype chemokine-based DNA epitope vaccine expressing a fusion protein that consists of 3 copies of the self-B cell epitope of Abeta(42) (Abeta(1-11)) , a non-self T helper cell epitope (PADRE), and macrophage-derived chemokine (MDC/CCL22) as a molecular adjuvant to promote a strong anti-inflammatory Th2 phenotype. METHODS AND FINDINGS: We generated pMDC-3Abeta(1-11)-PADRE construct and immunized 3xTg-AD mouse model starting at age of 3-4 months old. We demonstrated that prophylactic immunizations with the DNA epitope vaccine generated a robust Th2 immune response that induced high titers of anti-Abeta antibody, which in turn inhibited accumulation of Abeta pathology in the brains of older mice. Importantly, vaccination reduced glial activation and prevented the development of behavioral deficits in aged animals without increasing the incidence of microhemorrhages. CONCLUSIONS: Data from this transitional pre-clinical study suggest that our DNA epitope vaccine could be used as a safe and effective strategy for AD therapy. Future safety and immunology studies in large animals with the goal to achieve effective humoral immunity without adverse effects should help to translate this study to human clinical trials