53 research outputs found
Theory of edge-state optical absorption in two-dimensional transition metal dichalcogenide flakes
We develop an analytical model to describe sub-band-gap optical absorption in two-dimensional semiconducting transition metal dichalcogenide (s-TMD) nanoflakes. The material system represents an array of few-layer molybdenum disulfide crystals, randomly orientated in a polymer matrix. We propose that optical absorption involves direct transitions between electronic edge states and bulk bands, depends strongly on the carrier population, and is saturable with sufficient fluence. For excitation energies above half the band gap, the excess energy is absorbed by the edge-state electrons, elevating their effective temperature. Our analytical expressions for the linear and nonlinear absorption could prove useful tools in the design of practical photonic devices based on s-TMDs.Royal Academy of Engineering, Collaborative Research Center 76
Wideband saturable absorption in few-layer molybdenum diselenide (MoSeâ‚‚) for Q-switching Yb-, Er- and Tm-doped fiber lasers.
We fabricate a free-standing molybdenum diselenide (MoSe2) saturable absorber by embedding liquid-phase exfoliated few-layer MoSe2 flakes into a polymer film. The MoSe2-polymer composite is used to Q-switch fiber lasers based on ytterbium (Yb), erbium (Er) and thulium (Tm) gain fiber, producing trains of microsecond-duration pulses with kilohertz repetition rates at 1060 nm, 1566 nm and 1924 nm, respectively. Such operating wavelengths correspond to sub-bandgap saturable absorption in MoSe2, which is explained in the context of edge-states, building upon studies of other semiconducting transition metal dichalcogenide (TMD)-based saturable absorbers. Our work adds few-layer MoSe2 to the growing catalog of TMDs with remarkable optical properties, which offer new opportunities for photonic devices.EJRK and TH acknowledge support from the Royal Academy of Engineering (RAEng), through RAEng Fellowships.This is the author accepted manuscript. The final version is available from the Optical Society of Amercia via http://dx.doi.org/ via http://dx.doi.org/10.1364/OE.23.02005
Few-layer MoS<inf>2</inf> saturable absorbers for short-pulse laser technology: Current status and future perspectives [Invited]
Few-layer molybdenum disul de (MoS2) is emerging as a promising quasi-two-dimensional material, further
extending the library of suitable layered nanomaterials with exceptional optical properties for use in saturable
absorber devices that enable short-pulse generation in laser systems. In this article, we catalog and review the
nonlinear optical properties of few-layer MoS2, summarize recent progress in processing and integration into
saturable absorber devices and comment on the current status and future perspectives of MoS2-based pulsed
lasers.The authors would like to thank J. R. Taylor for fruitful
discussions. EJRK and TH acknowledge support from
the Royal Academy of Engineering (RAEng).This is the author accepted manuscript. The final version is available from OSA via https://www.osapublishing.org/prj/abstract.cfm?URI=prj-3-2-A30
Recommended from our members
Tunable Q-switched fiber laser based on saturable edge-state absorption in few-layer molybdenum disulfide (MoSâ‚‚).
We fabricate a few-layer molybdenum disulfide (MoSâ‚‚) polymer composite saturable absorber by liquid-phase exfoliation, and use this to passively Q-switch an ytterbium-doped fiber laser, tunable from 1030 to 1070 nm. Self-starting Q-switching generates 2.88 ÎĽs pulses at 74 kHz repetition rate, with over 100 nJ pulse energy. We propose a mechanism, based on edge states within the bandgap, responsible for the wideband nonlinear optical absorption exhibited by our few-layer MoSâ‚‚ sample, despite operating at photon energies lower than the material bandgap.EJRK acknowledges support from the Royal Academy of Engineering (RAEng), through a
RAEng Fellowship, RCTH from EPSRC (EP/G037221/1), GH from a CSC Cambridge International
Scholarship, and TH from the RAEng (Graphlex). The authors also acknowledge
ThorLabs for access to their technical drawings.This is the accepted manuscript. The final version is available at http://www.opticsinfobase.org/oe/abstract.cfm?uri=oe-22-25-31113. © 2014 Optical Society of America. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modifications of the content of this paper are prohibited
Recommended from our members
Scalar nanosecond pulse generation in a nanotube mode-locked environmentally stable fiber laser
We report an environmentally stable nanotube mode-locked fibre laser
producing linearly-polarized, nanosecond pulses. A simple
all-polarization-maintaining fibre ring cavity is used, including 300 m of
highly nonlinear fibre to elongate the cavity and increase intracavity
dispersion and nonlinearity. The laser generates scalar pulses with a duration
of 1.23 ns at a centre wavelength of 1042 nm, with 1.3-nm bandwidth and at
641-kHz repetition rate. Despite the long cavity, the output characteristics
show no significant variation when the cavity is perturbed, and the degree of
polarization remains at 97%
Solution processed MoS2-PVA composite for sub-bandgap mode-locking of a wideband tunable ultrafast Er:fiber laser
Abstract
We fabricate a free-standing few-layer molybdenum disulfide (MoS2)-polymer composite by liquid phase exfoliation of chemically pristine MoS2 crystals and use this to demonstrate a wideband tunable, ultrafast mode-locked fiber laser. Stable, picosecond pulses, tunable from 1,535 nm to 1,565 nm, are generated, corresponding to photon energies below the MoS2 material bandgap. These results contribute to the growing body of work studying the nonlinear optical properties of transition metal dichalcogenides that present new opportunities for ultrafast photonic applications.MZ wishes to acknowledge funding from the EPSRC (EP/K03705), RCTH from the EPSRC (EP/G037221/1), GH from a CSC Cambridge International Scholarship, EJRK from the Royal Academy of Engineering (RAEng), through a RAEng Fellowship and TH from the RAEng (Graphlex).This is the final version. It was first published by Springer at http://link.springer.com/article/10.1007%2Fs12274-014-0637-
Tm-doped fiber laser mode-locked by graphene-polymer composite.
We demonstrate mode-locking of a thulium-doped fiber laser operating at 1.94 ÎĽm, using a graphene-polymer based saturable absorber. The laser outputs 3.6 ps pulses, with ~0.4 nJ energy and an amplitude fluctuation ~0.5%, at 6.46 MHz. This is a simple, low-cost, stable and convenient laser oscillator for applications where eye-safe and low-photon-energy light sources are required, such as sensing and biomedical diagnostics
Stochasticity, periodicity and localized light structures in partially mode-locked fibre lasers
Physical systems with co-existence and interplay of processes featuring distinct spatio-temporal scales are found in various research areas ranging from studies of brain activity to astrophysics. The complexity of such systems makes their theoretical and experimental analysis technically and conceptually challenging. Here, we discovered that while radiation of partially mode-locked fibre lasers is stochastic and intermittent on a short time scale, it exhibits non-trivial periodicity and long-scale correlations over slow evolution from one round-trip to another. A new technique for evolution mapping of intensity autocorrelation function has enabled us to reveal a variety of localized spatio-temporal structures and to experimentally study their symbiotic co-existence with stochastic radiation. Real-time characterization of dynamical spatio-temporal regimes of laser operation is set to bring new insights into rich underlying nonlinear physics of practical active- and passive-cavity photonic systems
Black phosphorus ink formulation for inkjet printing of optoelectronics and photonics.
Black phosphorus is a two-dimensional material of great interest, in part because of its high carrier mobility and thickness dependent direct bandgap. However, its instability under ambient conditions limits material deposition options for device fabrication. Here we show a black phosphorus ink that can be reliably inkjet printed, enabling scalable development of optoelectronic and photonic devices. Our binder-free ink suppresses coffee ring formation through induced recirculating Marangoni flow, and supports excellent consistency ( 30 days) oxidation. We demonstrate printed black phosphorus as a passive switch for ultrafast lasers, stable against intense irradiation, and as a visible to near-infrared photodetector with high responsivities. Our work highlights the promise of this material as a functional ink platform for printed devices.Atomically thin black phosphorus shows promise for optoelectronics and photonics, yet its instability under environmental conditions and the lack of well-established large-area synthesis protocols hinder its applications. Here, the authors demonstrate a stable black phosphorus ink suitable for printed ultrafast lasers and photodetectors
- …