3,977 research outputs found
Stability of a regular black holes thin-shell wormhole in Reissner-Nordstrom - De Sitter space-time
The dynamics regular black holes thin shell wormhole with a phantom energy equation of state in Reissner-Nordstrom - De sitter space-time is studied using the Darmois-Israel formalism. A mechanical stability analysis is carried out by using the standard perturbation method. The stable and unstable static solution depends on the suitable value of parameters
Stability of regular thin shell wormholes supported by VDW quintessence
The dynamical equations of motion for a thin shell wormhole from regular black holes that are supported by Van der Waals (VDW) quintessence equation of state (EoS) are constructed, through cut and -paste technique. The linearized stability of regular wormhole is derived. The presences of unstable and stable static solutions with different value of some parameters are analyzed
Electronic Journal of Theoretical Physics Dynamics of a Charged Spherically Symmetric Thick Shell
Abstract: We Consider a spherically symmetric thick shell in two different space times. We have used the equation of motion for thick shell, developed by Khakshournia and Mansouri, to obtain the equation of motion of a charged spherical shell. We Expand the dynamical equation of motion of thick shell, to the first order of its thickness, to compare it with the dynamics of charged thin shell. It is shown that the effect of thickness is to speed up the collapse of the shell
Beyond Dakota Access Pipeline: Energy Development and the Imperative for Meaningful Tribal Consultation
Simulation of Arsenic Partitioning in Tributaries to Drinking Water Reservoirs
Arsenic released by bottom sediments was determined by experiments in which the sediments were artificially re-suspended using a particle entrapment simulator (PES) to simulate river conditions. Sediment cores were collected from various tributaries to drinking water reservoirs in Connecticut spiked with arsenic, and run in the PES at simulated bed-flow shear stresses from 0.0 to 0.6 N/m2. Under equilibrium conditions, the dissolved fraction of arsenic was found to range from 8.3 to 22.1 ug/1, which in most cases exceeded EPA Maximum Contaminant Level (MCL) of 10 ug/1. Experimental results from these simulations have shown that bed-flow shear stress causes an increased concentration of dissolved arsenic, most notably at shear stresses of 0.4,0.5, and 0.6 N/m2. For the solid phase under equilibrium, the concentrations of arsenic ranged between 71 and 275 mg/kg. The average concentration of arsenic on the solid phase as well as partitioning coefficient values (Kp) were highest at initial shear stress. This was attributed to the higher fraction of colloidal material and finer organic particles in the suspended solid mixture. Particles of such nature proved to have higher affinity to arsenic. Kp values were determined from PES data and were found to range from 4,687 to 24,090 1/kg. However, on a mass load basis, the amount of arsenic found in suspended sediment increased with the increase of shear stress. Similarly, the amount of arsenic in the solid phase increased significantly for sites with high Volatile Organic Carbon (VOC) content. Because of the influence of Total Suspended Solids (TSS) and VOC concentrations on Kp, the use of the PES is more appropriate in obtaining Kp values that would be found under real stream conditions when compared to the traditional way of measuring Kp using a jar study technique
Current perpendicular to plane Giant Magnetoresistance (GMR) in laminated nanostructures
We theoretically studied spin dependent electron transport
perpendicular-to-plain (CPP) in magnetic laminated multilayered structures by
using Kubo formalism. We took into account not only bulk scattering, but the
interface resistance due to both specular and diffuse reflection and also spin
conserving and spin-flip processes. It was shown that spin-flip scattering at
interfaces substantially reduces the value of GMR. This can explain the
experimental observations that the CPP GMR ratio for laminated structures only
slightly increases as compared to non-laminated ones despite lamination induces
a significant increase in CPP resistance.Comment: 4 pages, 2 figure
Modelling energy consumption in supermarkets to reduce energy use and greenhouse gas emissions using EnergyPlus
New refrigeration system configurations and other innovating technologies in retail supermarkets need to be considered to reduce energy use and greenhouse gas emissions. In supermarkets, there is a strong interaction between the refrigerated display cases, supermarket structure, internal machinery, customers, and the store’s HVAC system. The impact of these interactions on the energy and carbon emissions of a medium sized supermarket in Paris was modelled using EnergyPlus™. The results were calibrated against a typical UK store and validated against the Paris store. The effects of applying the technologies identified to have the greatest potential to reduce carbon emissions (changing the refrigerant to R744, switching from gas to electrical heating and adding doors to chilled cabinets) were modelled. The impact of climate change on ambient temperature and the impact of changes to the grid conversion factor were predicted for the store in Paris from 2020 to 2050
Fat City: The Relationship Between Urban Sprawl and Obesity
We study the relationship between urban sprawl and obesity. Using data that tracks individuals over time, we find no evidence that urban sprawl causes obesity. We show that previous findings of a positive relationship most likely reflect a failure to properly control for the fact the individuals who are more likely to be obese choose to live in more sprawling neighborhoods. Our results indicate that current interest in changing the built environment to counter the rise in obesity is misguided.urban sprawl; obesity; selection effects
- …