31 research outputs found
High temperature ultrasonic sensor for fission gas characterization in MTR harsh environment
In the contemporary world, the measurements in hostile environment is one of the predominant necessity for automotive, aerospace, metallurgy and nuclear plant. The measurement of different parameters in experimental reactors is an important point in nuclear power strategy. In the near past, IES (Institut d’Électronique et des Systèmes) on collaboration with CEA (Commissariat à l’Energie Atomique et aux Energies Alternatives) have developed the first ultrasonic sensor for the application of gas quantity determination that has been tested in a Materials Testing Reactor (MTR). Modern requirements state to labor with the materials that possess stability on its parameters around 350°C in operation temperature. Previous work on PZT components elaboration by screen printing method established the new basis in thick film fabrication and characterization in our laboratory. Our trials on Bismuth Titanate ceramics showed the difficulties related to high electrical conductivity of fabricated samples that postponed further research on this material. Among piezoceramics, the requirements on finding an alternative solution on ceramics that might be easily polarized and fabricated by screen printing approach were resolved by the fabrication of thick film from Sodium Bismuth Titanate (NBT) piezoelectric powder. This material exhibits high Curie temperature, relatively good piezoelectric and coupling coefficients, and it stands to be a good solution for the anticipated application.
In this paper, we present NBT thick film fabrication by screen printing, characterization of piezoelectric, dielectric properties and material parameters studies in dependence of temperature. Relatively high resistivity in the range of 1.1013 Ohm.cm for fabricated thick film is explained by Aurivillius structure in which a-and b-layers form perovskite structure between oxides of c-layer. Main results of this study are presented and discussed in terms of feasibility for an application to a new sensor device operating at high temperature level (400°). Piezoelectric parameters enhancement and loss reduction at elevated temperatures are envisaged to be optimized. Further sensor development and test in MTR are expected to be realized in the near future
High temperature ultrasonic sensor for fission gas characterization in MTR harsh environment
In the contemporary world, the measurements in hostile environment is one of the predominant necessity for automotive, aerospace, metallurgy and nuclear plant. The measurement of different parameters in experimental reactors is an important point in nuclear power strategy. In the near past, IES (Institut d’Électronique et des Systèmes) on collaboration with CEA (Commissariat à l’Energie Atomique et aux Energies Alternatives) have developed the first ultrasonic sensor for the application of gas quantity determination that has been tested in a Materials Testing Reactor (MTR). Modern requirements state to labor with the materials that possess stability on its parameters around 350°C in operation temperature. Previous work on PZT components elaboration by screen printing method established the new basis in thick film fabrication and characterization in our laboratory. Our trials on Bismuth Titanate ceramics showed the difficulties related to high electrical conductivity of fabricated samples that postponed further research on this material. Among piezoceramics, the requirements on finding an alternative solution on ceramics that might be easily polarized and fabricated by screen printing approach were resolved by the fabrication of thick film from Sodium Bismuth Titanate (NBT) piezoelectric powder. This material exhibits high Curie temperature, relatively good piezoelectric and coupling coefficients, and it stands to be a good solution for the anticipated application.
In this paper, we present NBT thick film fabrication by screen printing, characterization of piezoelectric, dielectric properties and material parameters studies in dependence of temperature. Relatively high resistivity in the range of 1.1013 Ohm.cm for fabricated thick film is explained by Aurivillius structure in which a-and b-layers form perovskite structure between oxides of c-layer. Main results of this study are presented and discussed in terms of feasibility for an application to a new sensor device operating at high temperature level (400°). Piezoelectric parameters enhancement and loss reduction at elevated temperatures are envisaged to be optimized. Further sensor development and test in MTR are expected to be realized in the near future
Sodium Bismuth Titanate thick films fabricated by screen printing method for high temperature ultrasonic sensor
International audienc
Placebo can enhance creativity.
BACKGROUND:The placebo effect is usually studied in clinical settings for decreasing negative symptoms such as pain, depression and anxiety. There is interest in exploring the placebo effect also outside the clinic, for enhancing positive aspects of performance or cognition. Several studies indicate that placebo can enhance cognitive abilities including memory, implicit learning and general knowledge. Here, we ask whether placebo can enhance creativity, an important aspect of human cognition. METHODS:Subjects were randomly assigned to a control group who smelled and rated an odorant (n = 45), and a placebo group who were treated identically but were also told that the odorant increases creativity and reduces inhibitions (n = 45). Subjects completed a recently developed automated test for creativity, the creative foraging game (CFG), and a randomly chosen subset (n = 57) also completed two manual standardized creativity tests, the alternate uses test (AUT) and the Torrance test (TTCT). In all three tests, participants were asked to create as many original solutions and were scored for originality, flexibility and fluency. RESULTS:The placebo group showed higher originality than the control group both in the CFG (p<0.04, effect size = 0.5) and in the AUT (p<0.05, effect size = 0.4), but not in the Torrance test. The placebo group also found more shapes outside of the standard categories found by a set of 100 CFG players in a previous study, a feature termed out-of-the-boxness (p<0.01, effect size = 0.6). CONCLUSIONS:The findings indicate that placebo can enhance the originality aspect of creativity. This strengthens the view that placebo can be used not only to reduce negative clinical symptoms, but also to enhance positive aspects of cognition. Furthermore, we find that the impact of placebo on creativity can be tested by CFG, which can quantify multiple aspects of creative search without need for manual coding. This approach opens the way to explore the behavioral and neural mechanisms by which placebo might amplify creativity
Recommended from our members
Creative foraging: An experimental paradigm for studying exploration and discovery
Creative exploration is central to science, art and cognitive development. However, research on creative exploration is limited by a lack of high-resolution automated paradigms. To address this, we present such an automated paradigm, the creative foraging game, in which people search for novel and valuable solutions in a large and well-defined space made of all possible shapes made of ten connected squares. Players discovered shape categories such as digits, letters, and airplanes as well as more abstract categories. They exploited each category, then dropped it to explore once again, and so on. Aligned with a prediction of optimal foraging theory (OFT), during exploration phases, people moved along meandering paths that are about three times longer than the shortest paths between shapes; when exploiting a category of related shapes, they moved along the shortest paths. The moment of discovery of a new category was usually done at a non-prototypical and ambiguous shape, which can serve as an experimental proxy for creative leaps. People showed individual differences in their search patterns, along a continuum between two strategies: a mercurial quick-to-discover/quick-to-drop strategy and a thorough slow-to-discover/slow-to-drop strategy. Contrary to optimal foraging theory, players leave exploitation to explore again far before categories are depleted. This paradigm opens the way for automated high-resolution study of creative exploration
The placebo group displayed higher “out-of-the-boxness” (OB) than the control group in the CFG.
<p>Main plot is a scatterplot of OB scores of the placebo (orange) and control (blue) groups. Y axis is the fraction of shapes outside standard categories, ranked from lowest to highest. X axis is group ranking. Inset shows mean OB in each group, error bars are standard error of the mean. ** p value < 0.01.</p
Creative foraging game (CFG).
<p>a: CFG interface. Left: starting point; right: example of a shape. b: Exploration phases are followed by exploitation phases in which participants usually find shapes with shared perceptual meaning. Purple: numbers; green: airplanes. Data for fig 1b is from one of the participants from Ref [<a href="http://www.plosone.org/article/info:doi/10.1371/journal.pone.0182466#pone.0182466.ref043" target="_blank">43</a>].</p