X-ray film chamber with carbon target of Tien-Shan complex array

X-ray films were exposed inside the ionization calorimeter under 74g/sq cm of carbon and 5 cm of lead. The X-ray film chamber area is 35 sq. m. Moving X-ray films were used, 50% of the events, which succeeded to determine incidence time, were identified with corresponding extensive air showers (EAS). For such events the size spectrum of associated EAS was derived. Two methods of energy measurement using X-ray films and ionization calorimeter were compared. The energy transfer from selected hadron to electromagnetic component is illustrated. It is found that in cascades with high energy release into electromagnetic components the hadron component is practically absent

Population genetics studies of <i>Puccinia striiformis</i> f. sp. <i>tritici</i> in Dagestan and Northwestern Russia

Background. Yellow rust (Puccinia striiformis West.) is a harmful disease of cereal crops. Significant yellow rust in cidence has systematically been registered on VIR’s experimental fields in Derbent (Dagestan) and Pushkin (North western Russia). Resistance assessment and subsequent selection of resistance sources for breeding require proper monitoring of the virulence in the pathogen’s local populations. The purpose of this work was to characterize the virulence of P. striiformis on VIR’s experimental fields in Derbent and Pushkin, and use molecular markers to find out whether the studied P. striiformis isolates belong to any of the most dangerous invasive groups PstS1 and PstS2.Materials and methods. In Derbent, leaves with uredinio pustules were collected from bread and durum wheat accessions; in Pushkin, from bread wheat and triticale plants. The pathogen’s virulence was analyzed in the laboratory using the world and European sets of differential cultivars, and isogenic Avocet Yr lines. In 2020, the resistance of differential sets was tested in the field in Derbent under a high natural infection pressure. SCAR markers were used to identify the invasive PstS1 and PstS2 isolates. Results and conclusion. A total of 18 phenotypes (races) of striiformis were identified (4 in Derbent, and 14 in Pushkin). The Yr5, Yr10, Yr15, Yr17, Yr24 and Yr26 genes manifested high effectiveness in both locations. In the field, immune responses were observed in the Avocet lines with the Yr5, Yr7, Yr8, Yr10, Yr15, Yr24 and YrAR genes, and in the differential cvs. ‘Vilmorin 23’, ‘Moro’, ‘Reichersberg 42’, ‘Heines Peko’, ‘Nord Desprez’, ‘Compare’, ‘Carstens V’, ‘Spaldings Prolific’ and ‘Heines VII’. Moderate resistance was recorded for the line Jupateco 73R (damage up to 5%), and cvs. ‘Heines Kolben’ and ‘Strubes Dickkopf’ (5–10%). Using molecular markers, 2 isolates from the invasive group PstS2 were identified in the Pushkin collection of P. striiformis

The research of abnormal toxicity and local irritant effect in the Draize test of the drug furacilin, concentrate for the preparation of a solution for local and externaluse

The research of abnormal toxicity and locally irritating effect of the drug Furacilin, concentrate for the preparation of a solution for local and external use in comparison with the drug Furacilin, tablets for the preparation of the solution, was carried ou

Mercury pollution for marine environment at Farwa Island, Libya

Coimmobilization of pyranose dehydrogenase as an enzyme catalyst, osmium redox polymers [Os­(4,4′-dimethoxy-2,2′-bipyridine)₂(poly­(vinylimidazole))₁₀Cl]⁺ or [Os­(4,4′-dimethyl-2,2′-bipyridine)₂(poly­(vinylimidazole))₁₀Cl]⁺ as mediators, and carbon nanotube conductive scaffolds in films on graphite electrodes provides enzyme electrodes for glucose oxidation. The recombinant enzyme and a deglycosylated form, both expressed in Pichia pastoris, are investigated and compared as biocatalysts for glucose oxidation using flow injection amperometry and voltammetry. In the presence of 5 mM glucose in phosphate-buffered saline (PBS) (50 mM phosphate buffer solution, pH 7.4, with 150 mM NaCl), higher glucose oxidation current densities, 0.41 mA cm^–2, are obtained from enzyme electrodes containing the deglycosylated form of the enzyme. The optimized glucose-oxidizing anode, prepared using deglycosylated enzyme coimmobilized with [Os­(4,4′-dimethyl-2,2′-bipyridine)₂(poly­(vinylimidazole))₁₀Cl]⁺ and carbon nanotubes, was coupled with an oxygen-reducing bilirubin oxidase on gold nanoparticle dispersed on gold electrode as a biocathode to provide a membraneless fully enzymatic fuel cell. A maximum power density of 275 μW cm^–2 is obtained in 5 mM glucose in PBS, the highest to date under these conditions, providing sufficient power to enable wireless transmission of a signal to a data logger. When tested in whole human blood and unstimulated human saliva maximum power densities of 73 and 6 μW cm^–2 are obtained for the same fuel cell configuration, respectively

2D Spectroscopy of Candidate Polar-Ring Galaxies: I. The Pair of Galaxies UGC 5600/09

Observations of the pair of galaxies VV 330 with the SCORPIO multimode instrument on the 6-m Special Astrophysical Observatory telescope are presented. Large-scale velocity fields of the ionized gas in H-alfa and brightness distributions in continuum and H-alfa have been constructed for both galaxies with the help of a scanning Fabry Perot interferometer. Long-slit spectroscopy is used to study the stellar kinematics. Analysis of the data obtained has revealed a complex structure in each of the pair components. Three kinematic subsystems have been identified in UGC 5600: a stellar disk, an inner gas ring turned with respect to the disk through ~80degrees, and an outer gas disk. The stellar and outer gas disks are noncoplanar. Possible scenarios for the formation of the observed multicomponent kinematic galactic structure are considered, including the case where the large-scale velocity field of the gas is represented by the kinematic model of a disk with a warp. The velocity field in the second galaxy of the pair, UGC 5609, is more regular. A joint analysis of the data on the photometric structure and the velocity field has shown that this is probably a late-type spiral galaxy whose shape is distorted by the gravitational interaction, possibly, with UGC 5600.Comment: 18 pages, 6 figure

NGC 7468: a galaxy with an inner polar disk

We present our spectroscopic observations of the galaxy NGC 7468 performed at the 6-m Special Astrophysical Observatory telescope using the UAGS long-slit spectrograph, the multipupil fiber spectrograph MPFS, and the scanning Fabry-Perot interferometer (IFP). We found no significant deviations from the circular rotation of the galactic disk in the velocity field in the regions of brightness excess along the major axis of the galaxy (the putative polar ring). Thus, these features are either tidal structures or weakly developed spiral arms. However, we detected a gaseous disk at the center of the galaxy whose rotation plane is almost perpendicular to the plane of the galactic disk. The central collision of NGC 7468 with a gas-rich dwarf galaxy and their subsequent merging seem to be responsible for the formation of this disk.Comment: 8 pages, 6 figures, accepted in Astronomy Letters, 2004, vol 30., N 9, p. 58

INFLUENCE OF THE TECHNOLOGICAL SCHEME OF PRODUCTION OF EXTRUSION TUBES ON METALLOGRAPHIC FEATURES AND MECHANICAL PROPERTIES OF COLD FORMED TUBES

Работа посвящена оценке влияния технологической схемы производства передельных горячепрессованных труб из титанового псевдо-α сплава Ti–3Al–2.5V [1] на металлографические особенности и механические свойства холоднодеформированных труб готового размера. Оценка влияния проводилась с целью моделирования процесса производства холоднодеформированных труб по технологии, включающей в себя изготовление горячепрессованных передельных труб размерами 90,0 × 20,0 и 90,0 × 23,5 мм и последующую холодную прокатку труб размерами 38,1 × 5,36 мм в условиях ПАО «ТМК».The work is devoted to the evaluation of the effect of the technological scheme for the production of extrusion tubes from Ti–3Al–2.5V titanium pseudo-α alloy [1] on metallographic features and mechanical properties of cold-formed tubes of finished size. Impact evaluation was carried out to simulate the production process of cold-deformed tubes using a technology including the production of extrusion conduits with dimensions of 90.0 × 20.0 and 90.0 × 23.5 mm and subsequent cold formed of tubes measuring 38,1 × 5,36 mm in conditions of PJSC TMK