Limits on the Position Wander of Sgr A*

We present measurements with the VLBA of the variability in the centroid position of Sgr A* relative to a background quasar at 7-mm wavelength. We find an average centroid wander of 71 +/- 45 micro-arcsec for time scales between 50 and 100 min and 113 +/- 50 micro-arcsec for timescales between 100 and 200 min, with no secular trend. These are sufficient to begin constraining the viability of the hot-spot model for the radio variability of Sgr A*. It is possible to rule out hot spots with orbital radii above 15GM_SgrA*/c^2 that contribute more than 30% of the total 7-mm flux. However, closer or less luminous hot spots remain unconstrained. Since the fractional variability of Sgr A* during our observations was ~20% on time scales of hours, the hot-spot model for Sgr A*'s radio variability remains consistent with these limits. Improved monitoring of Sgr A*'s centroid position has the potential to place significant constraints upon the existence and morphology of inhomogeneities in a supermassive black hole accretion flow.Comment: 14 pages, 3 figures submitted to Ap

Oscillating Starless Cores: The Nonlinear Regime

In a previous paper, we modeled the oscillations of a thermally-supported (Bonnor-Ebert) sphere as non-radial, linear perturbations following a standard analysis developed for stellar pulsations. The predicted column density variations and molecular spectral line profiles are similar to those observed in the Bok globule B68 suggesting that the motions in some starless cores may be oscillating perturbations on a thermally supported equilibrium structure. However, the linear analysis is unable to address several questions, among them the stability, and lifetime of the perturbations. In this paper we simulate the oscillations using a three-dimensional numerical hydrodynamic code. We find that the oscillations are damped predominantly by non-linear mode-coupling, and the damping time scale is typically many oscillation periods, corresponding to a few million years, and persisting over the inferred lifetime of gobules.Comment: 7 pages, 7 figures, accepted by Ap

Natural history contributions of the University of Glasgow Exploration Society to Scotland and the World

Expeditions with a natural history focus have been organised by University of Glasgow staff and students since the 1930s. The educational benefits of such expeditions to students have been reported by Harper et al. ( Journal of Biological Education 51, 3- 16; 2017). Here, we present a short history of these expeditions, concentrating on their scientific achievements. In addition to expedition reports, a large number of PhD theses, masters and honours project reports and scientific papers have been based on expedition work. Many biological specimens have been deposited in museums, including some new species. We provide case histories of four expedition locations, to demonstrate the variety of work done, and the value of returning many times to the same place: Scotland, Trinidad and Tobago, North Cyprus and Ecuador. A major problem for expeditions is funding. For many years, the Carnegie Trust for the Universities of Scotland ran a funding stream that was crucial to the viability of Scottish university expeditions, but this has sadly now closed. For Glasgow University expeditions, the Blodwen Lloyd Binns Bequest has provided a reliable source since 1994, and we hope that it will continue to do so

Theory and design of Inx_{x}Ga1−x_{1-x}As1−y_{1-y}Biy_{y} mid-infrared semiconductor lasers: type-I quantum wells for emission beyond 3 μ\mum on InP substrates

We present a theoretical analysis and optimisation of the properties and performance of mid-infrared semiconductor lasers based on the dilute bismide alloy In$_{x}$Ga$_{1-x}$As$_{1-y}$Bi$_{y}$, grown on conventional (001) InP substrates. The ability to independently vary the epitaxial strain and emission wavelength in this quaternary alloy provides significant scope for band structure engineering. Our calculations demonstrate that structures based on compressively strained In$_{x}$Ga$_{1-x}$As$_{1-y}$Bi$_{y}$ quantum wells (QWs) can readily achieve emission wavelengths in the 3 -- 5 $\mu$m range, and that these QWs have large type-I band offsets. As such, these structures have the potential to overcome a number of limitations commonly associated with this application-rich but technologically challenging wavelength range. By considering structures having (i) fixed QW thickness and variable strain, and (ii) fixed strain and variable QW thickness, we quantify key trends in the properties and performance as functions of the alloy composition, structural properties, and emission wavelength, and on this basis identify routes towards the realisation of optimised devices for practical applications. Our analysis suggests that simple laser structures -- incorporating In$_{x}$Ga$_{1-x}$As$_{1-y}$Bi$_{y}$ QWs and unstrained ternary In$_{0.53}$Ga$_{0.47}$As barriers -- which are compatible with established epitaxial growth, provide a route to realising InP-based mid-infrared diode lasers.Comment: Submitted versio

The Event Horizon of M87

The 6 billion solar mass supermassive black hole at the center of the giant elliptical galaxy M87 powers a relativistic jet. Observations at millimeter wavelengths with the Event Horizon Telescope have localized the emission from the base of this jet to angular scales comparable to the putative black hole horizon. The jet might be powered directly by an accretion disk or by electromagnetic extraction of the rotational energy of the black hole. However, even the latter mechanism requires a confining thick accretion disk to maintain the required magnetic flux near the black hole. Therefore, regardless of the jet mechanism, the observed jet power in M87 implies a certain minimum mass accretion rate. If the central compact object in M87 were not a black hole but had a surface, this accretion would result in considerable thermal near-infrared and optical emission from the surface. Current flux limits on the nucleus of M87 strongly constrain any such surface emission. This rules out the presence of a surface and thereby provides indirect evidence for an event horizon.Comment: 9 pages, 2 figures, submitted to Ap

Solid state television camera system Patent

Solid state television camera system consisting of monolithic semiconductor mosaic sensor and molecular digital readout system

Improving utility in the Marine Corps depot level maintenance program

MBA Professional ReportThe Marine Corps operates a Depot Level Maintenance Program (DLMP) to support the continued operation of principal end items. Principal end items require periodic induction into the DLMP. This maintenance consists of major systems overhauls aimed at extending the life cycle of the principal end item. The frequency of these inductions is different for each end item. The number of systems requiring induction into Depot Level Maintenance in a given year is always greater than the funding available in that year resulting in a constraint. The Marine Corps has attempted to optimize the utility received from the DLMP through the use of a model that takes a number of variables into consideration resulting in a schedule for enditems to be inducted into the DLMP. This model makes the most efficient use of available funding by creating the largest increase in readiness reporting possible given the constrained budget. The changing operational requirements in light of current conflicts and future operations tempo have made the current DLMP process problematic.http://archive.org/details/improvingutility109459886Major, United States Marine CorpsCaptain, United States Marine CorpsApproved for public release; distribution is unlimited

Strong deflection limit of black hole gravitational lensing with arbitrary source distances

The gravitational field of supermassive black holes is able to strongly bend light rays emitted by nearby sources. When the deflection angle exceeds $\pi$, gravitational lensing can be analytically approximated by the so-called strong deflection limit. In this paper we remove the conventional assumption of sources very far from the black hole, considering the distance of the source as an additional parameter in the lensing problem to be treated exactly. We find expressions for critical curves, caustics and all lensing observables valid for any position of the source up to the horizon. After analyzing the spherically symmetric case we focus on the Kerr black hole, for which we present an analytical 3-dimensional description of the higher order caustic tubes.Comment: 20 pages, 8 figures, appendix added. In press on Physical Review

Radiative Models of Sagittarius A* and M87 from Relativistic MHD Simulations

Ongoing millimeter VLBI observations with the Event Horizon Telescope allow unprecedented study of the innermost portion of black hole accretion flows. Interpreting the observations requires relativistic, time-dependent physical modeling. We discuss the comparison of radiative transfer calculations from general relativistic MHD simulations of Sagittarius A* and M87 with current and future mm-VLBI observations. This comparison allows estimates of the viewing geometry and physical conditions of the Sgr A* accretion flow. The viewing geometry for M87 is already constrained from observations of its large-scale jet, but, unlike Sgr A*, there is no consensus for its millimeter emission geometry or electron population. Despite this uncertainty, as long as the emission region is compact, robust predictions for the size of its jet launching region can be made. For both sources, the black hole shadow may be detected with future observations including ALMA and/or the LMT, which would constitute the first direct evidence for a black hole event horizon.Comment: 8 pages, 2 figures, submitted to the proceedings of AHAR 2011: The Central Kiloparse