Static aerodynamic characteristics of a 0.035-scale model of a modified NKC-135 airplane at a Mach number of 0.28

A 0.035-scale model fo a modified NKC-135 airplane was tested in 12-foot pressure wind tunnel to determine the effects on the static aerodynamic characteristics of modifications to the basic aircraft. Modifications investigated included: nose, lower fuselage, and upper fuselage radomes; wing pylons and pods; overwing probe; and air conditioning inlets. The investigation was performed at a Mach number of 0.28 over a Reynolds number range from 6.6 to 26.2 million per meter. Angles of attack and sideslip varied from -8 deg to 20 deg and from -18 deg to 8 deg, respectively, for various combinations of flap, aileron, and rudder deflections. A limited analysis of the test results indicates that the addition of the radomes reduces lateral-directional stability and control effectiveness of the basic aircraft

TB98: Oxygen Diffusion Rate Relationships under Three Soil Conditions

The objective of this study was to determine the oxygen diffusion rate (ODR)—soil moisture relationship for three sieved, root-free soils to determine if there are basic ODR-soil characteristic differences that might influence data at different soil water contents in the presence of plant roots. Advanced knowledge of ODR-soil moisture relationships would also help scientists to evaluate the effect of variation in the water table on plant growth.https://digitalcommons.library.umaine.edu/aes_techbulletin/1105/thumbnail.jp

ICT in medicine and health care: assessing social, ethical and legal issues.

Continuous developments in information and communication technologies (ICT) have resulted in an increasing use of these technologies in the practice of medicine and in the provision of medical care. This paper presents a series of perspectives from different areas of expertise on some of the ways in which ICT has changed the social picture in respect of the practice of medicine. The aim of the paper is to provide a context for further debate, in the form of a Panel Session, where the issue of Human Choice and Computing can be discussed with reference to a set of specific scenarios. The authors of this paper represent a wide variety of disciplines including law, ethics, medicine, philosophy and computer science, thus bringing a broad perspective to begin the discussions. The aim of the session is to provoke further discussion, encouraging input from other disciplines respresented by the participants, with a view to identifying the level of human choice in a social arena which has at its heart a vulnerable community. In this environment, and in this era, the ‘social’ in social informatics has never been more important

Invest to Save: Report and Recommendations of the NSF-DELOS Working Group on Digital Archiving and Preservation

Digital archiving and preservation are important areas for research and development, but there is no agreed upon set of priorities or coherent plan for research in this area. Research projects in this area tend to be small and driven by particular institutional problems or concerns. As a consequence, proposed solutions from experimental projects and prototypes tend not to scale to millions of digital objects, nor do the results from disparate projects readily build on each other. It is also unclear whether it is worthwhile to seek general solutions or whether different strategies are needed for different types of digital objects and collections. The lack of coordination in both research and development means that there are some areas where researchers are reinventing the wheel while other areas are neglected. Digital archiving and preservation is an area that will benefit from an exercise in analysis, priority setting, and planning for future research. The WG aims to survey current research activities, identify gaps, and develop a white paper proposing future research directions in the area of digital preservation. Some of the potential areas for research include repository architectures and inter-operability among digital archives; automated tools for capture, ingest, and normalization of digital objects; and harmonization of preservation formats and metadata. There can also be opportunities for development of commercial products in the areas of mass storage systems, repositories and repository management systems, and data management software and tools.

Primary and secondary electrical space power based on advanced PEM systems

For new space ventures, power continues to be a pacing function for mission planning and experiment endurance. Although electrochemical power is a well demonstrated space power technology, current hardware limitations impact future mission viability. In order to document and augment electrochemical technology, a series of experiments for the National Aeronautics and Space Administration Lewis Research Center (NASA LeRC) are underway at the Los Alamos National Laboratory that define operational parameters on contemporary proton exchange membrane (PEM) hardware operating with hydrogen and oxygen reactants. Because of the high efficiency possible for water electrolysis, this hardware is also thought part of a secondary battery design built around stored reactants - the so-called regenerative fuel cell. An overview of stack testing at Los Alamos and of analyses related to regenerative fuel cell systems are provided in this paper. Finally, this paper describes work looking at innovative concepts that remove complexity from stack hardware with the specific intent of higher system reliability. This new concept offers the potential for unprecedented electrochemical power system energy densities

Models for subsurface drainage

April 1971.Bibliography: pages 28-30.supported by the Inland Waters Directorate, Canada Department of Environment, and the U.S. National Science Foundation, Grant GK-31521 X

Azole Drugs Are Imported By Facilitated Diffusion in Candida albicans and Other Pathogenic Fungi

Despite the wealth of knowledge regarding the mechanisms of action and the mechanisms of resistance to azole antifungals, very little is known about how the azoles are imported into pathogenic fungal cells. Here the in-vitro accumulation and import of Fluconazole (FLC) was examined in the pathogenic fungus, Candida albicans. In energized cells, FLC accumulation correlates inversely with expression of ATP-dependent efflux pumps. In de-energized cells, all strains accumulate FLC, suggesting that FLC import is not ATP-dependent. The kinetics of import in de-energized cells displays saturation kinetics with a Km of 0.64 uM and Vmax of 0.0056 pmol/min/108 cells, demonstrating that FLC import proceeds via facilitated diffusion through a transporter rather than passive diffusion. Other azoles inhibit FLC import on a mole/mole basis, suggesting that all azoles utilize the same facilitated diffusion mechanism. An analysis of related compounds indicates that competition for azole import depends on an aromatic ring and an imidazole or triazole ring together in one molecule. Import of FLC by facilitated diffusion is observed in other fungi, including Cryptococcus neoformans, Saccharomyces cerevisiae, and Candida krusei, indicating that the mechanism of transport is conserved among fungal species. FLC import was shown to vary among Candida albicans resistant clinical isolates, suggesting that altered facilitated diffusion may be a previously uncharacterized mechanism of resistance to azole drugs

Estimates in Beurling--Helson type theorems. Multidimensional case

We consider the spaces $A_p(\mathbb T^m)$ of functions $f$ on the $m$ -dimensional torus $\mathbb T^m$ such that the sequence of the Fourier coefficients $\hat{f}=\{\hat{f}(k), ~k \in \mathbb Z^m\}$ belongs to $l^p(\mathbb Z^m), ~1\leq p<2$. The norm on $A_p(\mathbb T^m)$ is defined by $\|f\|_{A_p(\mathbb T^m)}=\|\hat{f}\|_{l^p(\mathbb Z^m)}$. We study the rate of growth of the norms $\|e^{i\lambda\varphi}\|_{A_p(\mathbb T^m)}$ as $|\lambda|\rightarrow \infty, ~\lambda\in\mathbb R,$ for $C^1$ -smooth real functions $\varphi$ on $\mathbb T^m$ (the one-dimensional case was investigated by the author earlier). The lower estimates that we obtain have direct analogues for the spaces $A_p(\mathbb R^m)$

Atmospheric conditions and their effect on ball-milled magnesium diboride

Magnesium diboride bulk pellets were fabricated from pre-reacted MgB2 powder ball milled with different amounts of exposure to air. Evidence of increased electron scattering including increased resistivity, depressed Tc, and enhanced Hc2 of the milled and heat treated samples were observed as a result of increased contact with air. These and other data were consistent with alloying with carbon as a result of exposure to air. A less clear trend of decreased connectivity associated with air exposure was also observed. In making the case that exposure to air should be considered a doping process, these results may explain the wide varibability of "undoped" MgB2 properties extant in the literature.Comment: Work presented at ASC 2006 in Seattl