The effect of diclofenac sodium on neural tube development in the early stage of chick embryos

Background: Neural tube defects are congenital malformations of the central nervous system. Genetic predisposition and some environmental factors play an important role in the development of neural tube defects. This study aimed to investigate the effects of diclofenac sodium on the neural tube development in a chick embryo model that corresponds to the first month of vertebral deve- lopment in mammals.  Materials and methods: Seventy-five fertile, specific pathogen-free eggs were incubated for 28 h and were divided into five groups of 15 eggs each. Diclofenac sodium was administered via the sub-blastodermic route at this stage. Incubation was continued till the end of the 48th h. All eggs were then opened and embryos were dissected from embryonic membranes and evaluated morphologically and histopathologically.  Results: It was determined that the use of increasing doses of diclofenac sodium led to defects of midline closure in early chicken embryos. There were statistically significant differences in neural tube positions (open or close) among the groups. In addition; crown–rump length, somite number were significantly decreased in high dose experimental groups compared with control group.  Conclusions: This study showed that development of neurons is affected in chi- cken embryos after administration of diclofenac sodium. The exact teratogenic mechanism of diclofenac sodium is not clear; therefore it should be investigated.

Derivation of a rod theory for biphase materials with dislocations at the interface

Starting from three-dimensional elasticity we derive a rod theory for biphase materials with a prescribed dislocation at the interface. The stored energy density is assumed to be non-negative and to vanish on a set consisting of two copies of SO(3). First, we rigorously justify the assumption of dislocations at the interface. Then, we consider the typical scaling of multiphase materials and we perform an asymptotic study of the rescaled energy, as the diameter of the rod goes to zero, in the framework of $\Gamma$-convergence

Age-related changes of nasal cavity and conchae volumes and volume fractions in children: a stereological study

Background: The anatomy of the human nasal cavity (NC) is complex and its structures are closely related to the functions of the NC. Studies which assessing the mean volumes of NC and conchae are very infrequent. The purpose of current study is to investigate development of NC and conchae according to age and sex by using stereological method. Materials and methods: This retrospective volumetric study was carried out on 342 individuals (166 females and 176 males) between 0 and 18 years old with no pathological conditions or medical procedures that affected the skeletal morphology of the NC. Volumetric estimations were determined on computed tomography (CT) images using point-counting approach of stereological methods. Results: NC, inferior nasal conchae (INC) and middle nasal conchae (MNC) volume measurements that obtained using point-counting method were increased with age in both sexes until 15 years old. Regardless of gender; no significant difference was determined between the left and right values for NC, conchae volumes and choanae measurements. Generally, significant differences were determined in NC and INC volumes according to gender after they reached maximum growth period. According to age the volume ratios of INC to NC and MNC to NC were ranged from 18% to 32% and 9% to15%, respectively. Conclusions: The current study demonstrated that the point-counting method is effective in determining volume estimation of NC and is well suited for CT studies. Our results could provide volumetric indexes for the NC and conchae, which could help the physician for both patient selections for surgery, and for the assessment of any surgical technique used to treatment of nasal obstruction. (

Estimation of spleen volume and surface area of the newborns’ cadaveric spleen using stereological methods

Background: The purpose of this study was to compare different techniques for the estimation of spleen volume and surface area using magnetic resonance imaging (MRI) images, ultrasonography (USG) images and cadaveric specimen, and to evaluate errors associated with volume estimation techniques based onfluid displacement.Materials and methods: Five new born cadavers, aged 39.7 ± 1.5 weeks, weighted 2.220 ± 1.056 g, were included in the present study. Three different methods were used to assess the spleen volume. The vertical section technique was applied using cycloid test probes for estimation of spleen surface area in MRI.Results: The mean ± standard deviation of spleen volumes by fluid displacement was 4.82 ± 3.85 cm3. Volumes determined by the Cavalieri’s principle using physical section and point-counting techniques were 4.45 ± 3.47 cm3 and 4.65 ± 3.75 cm3, respectively; volumes measured by USG and cadaver using ellipsoid formula were 4.70 ± 3.02 cm3 and 5.98 ± 4.58 cm3, respectively. No significant differences were found among all methods (p > 0.05). The spleen surface area was calculated as a 32.3 ± 20.6 cm2 by physical sections using cadaver and also it was determined on axial, sagittal and coronal MR planes as 24.9 ± 15.2 cm2, 18.5 ± 5.92 cm2 and 24.3 ± 12.7 cm2, respectively.Conclusions: As a result, MR images allow an easy, reliable and reproducible volume and surface area estimation of normal and abnormal spleen using Cavalieri’sprinciple. We consider that our study may serve as a reference for similar studies to be conducted in future

Strain engineering and one-dimensional organization of metal-insulator domains in single-crystal VO2 beams

Spatial phase inhomogeneity at the nano- to microscale is widely observed in strongly-correlated electron materials. The underlying mechanism and possibility of artificially controlling the phase inhomogeneity are still open questions of critical importance for both the phase transition physics and device applications. Lattice strain has been shown to cause the coexistence of metallic and insulating phases in the Mott insulator VO2. By continuously tuning strain over a wide range in single-crystal VO2 micro- and nanobeams, here we demonstrate the nucleation and manipulation of one-dimensionally ordered metal-insulator domain arrays along the beams. Mott transition is achieved in these beams at room temperature by active control of strain. The ability to engineer phase inhomogeneity with strain lends insight into correlated electron materials in general, and opens opportunities for designing and controlling the phase inhomogeneity of correlated electron materials for micro- and nanoscale device applications.Comment: 14 pages, 4 figures, with supplementary informatio

Asynchronous Photoexcited Electronic and Structural Relaxation in Lead-Free Perovskites

Vacancy-ordered lead-free perovskites with more-stable crystalline structures have been intensively explored as the alternatives for resolving the toxic and long-term stability issues of lead halide perovskites (LHPs). The dispersive energy bands produced by the closely packed halide octahedral sublattice in these perovskites are meanwhile anticipated to facility the mobility of charge carriers. However, these perovskites suffer from unexpectedly poor charge carrier transport. To tackle this issue, we have employed the ultrafast, elemental-specific X-ray transient absorption (XTA) spectroscopy to directly probe the photoexcited electronic and structural dynamics of a prototypical vacancy-ordered lead-free perovskite (Cs3Bi2Br9). We have discovered that the photogenerated holes quickly self-trapped at Br centers, simultaneously distorting the local lattice structure, likely forming small polarons in the configuration of Vk center (Br2– dimer). More significantly, we have found a surprisingly long-lived, structural distorted state with a lifetime of ∼59 μs, which is ∼3 orders of magnitude slower than that of the charge carrier recombination. Such long-lived structural distortion may produce a transient “background” under continuous light illumination, influencing the charge carrier transport along the lattice framework

Gene-based GWAS and -biological pathway analysis of the resilience of executive functioning

Resilience in executive functioning (EF) is characterized by high EF measured by neuropsychological test performance despite structural brain damage from neurodegenerative conditions. We previously reported single nucleotide polymorphism (SNP) genome-wide association study (GWAS) results for EF resilience. Here, we report gene- and pathway-based analyses of the same resilience phenotype, using an optimal SNP-set (Sequence) Kernel Association Test (SKAT) for gene-based analyses (conservative threshold for genome-wide significance = 0.05/18,123=2.8×10−6) and the gene-set enrichment package GSA-SNP for biological pathway analyses (False discovery rate (FDR) < 0.05). Gene-based analyses found a genome-wide significant association between RNASE13 and EF resilience (p=1.33×10−7). Genetic pathways involved with dendritic/neuron spine, presynaptic membrane, postsynaptic density etc. were enriched with association to EF resilience. Although replication of these results is necessary, our findings indicate the potential value of gene- and pathway-based analyses in research on determinants of cognitive resilience

Test of 6-kVA three-phase flux transfer-type current-limiting transformer

A 6-kVA three-phase model of the flux transfer-type current-limiting transformer was developed and tested. In this device, the winding loops of YBCO superconducting tapes couple magnetically two independent iron cores: the primary-side iron core and the secondary-side iron core. The former and the latter are equipped with copper primary and secondary windings, respectively. Because the magnetic fluxes linked to the superconducting winding loops must be kept constant, the magnetic flux is transferred by the superconducting YBCO loops between the two iron cores in order to couple magnetically the primary and secondary coils. While the YBCO loops are superconducting, 100% of the magnetic flux is transferred and the device shows the similar function as usual transformers. Once the YBCO loops become normal by a fault current in any of the windings, the power transfer between two iron cores is limited and the current in the secondary winding is limited naturally on a result of decoupling the iron cores