Transfer molding of PMR-15 polyimide resin

Transfer molding is an economically viable method of producing small shapes of PMR-15 polyimide. It is shown that with regard to flexural, compressive, and tribological properties transfer-molded PMR-15 polyimide is essentially equivalent to PMR-15 polyimide produced by the more common method of compression molding. Minor variations in anisotropy are predictable effects of molding design and secondary finishing operations

Turkey production in Missouri

"Reprinted December, 1939

An integrated CFD/experimental analysis of aerodynamic forces and moments

Aerodynamic analysis using computational fluid dynamics (CFD) is most fruitful when it is combined with a thorough program of wind tunnel testing. The understanding of aerodynamic phenomena is enhanced by the synergistic use of both analysis methods. A technique is described for an integrated approach to determining the forces and moments acting on a wind tunnel model by using a combination of experimentally measured pressures and CFD predictions. The CFD code used was FLO57 (an Euler solver) and the wind tunnel model was a heavily instrumented delta wing with 62.5 deg of leading-edge sweep. A thorough comparison of the CFD results and the experimental data is presented for surface pressure distributions and longitudinal forces and moments. The experimental pressures were also integrated over the surface of the model and the resulting forces and moments are compared to the CFD and wind tunnel results. The accurate determination of various drag increments via the combined use of the CFD and experimental pressures is presented in detail

Validation of the Harvard Lyman-α in situ water vapor instrument: Implications for the mechanisms that control stratospheric water vapor

Building on previously published details of the laboratory calibrations of the Harvard Lyman-α photofragment fluorescence hygrometer (HWV) on the NASA ER-2 and WB-57 aircraft, we describe here the validation process for HWV, which includes laboratory calibrations and intercomparisons with other Harvard water vapor instruments at water vapor mixing ratios from 0 to 10 ppmv, followed by in-flight intercomparisons with the same Harvard hygrometers. The observed agreement exhibited in the laboratory and during intercomparisons helps corroborate the accuracy of HWV. In light of the validated accuracy of HWV, we present and evaluate a series of intercomparisons with satellite and balloon borne water vapor instruments made from the upper troposphere to the lower stratosphere in the tropics and midlatitudes. Whether on the NASA ER-2 or WB-57 aircraft, HWV has consistently measured about 1–1.5 ppmv higher than the balloon-borne NOAA/ESRL/GMD frost point hygrometer (CMDL), the NOAA Cryogenic Frost point Hygrometer (CFH), and the Microwave Limb Sounder (MLS) on the Aura satellite in regions of the atmosphere where water vapor is <10 ppmv. Comparisons in the tropics with the Halogen Occultation Experiment (HALOE) on the Upper Atmosphere Research Satellite show large variable differences near the tropopause that converge to ~10% above 460 K, with HWV higher. Results we show from the Aqua Validation and Intercomparison Experiment (AquaVIT) at the AIDA chamber in Karlsruhe do not reflect the observed in-flight differences. We illustrate that the interpretation of the results of comparisons between modeled and measured representations of the seasonal cycle of water entering the lower tropical stratosphere is dictated by which data set is used

Stability and electronic structure of the complex K2_2PtCl6_6 structure-type hydrides

The stability and bonding of the ternary complex K$_2$PtCl$_6$ structure hydrides is discussed using first principles density functional calculations. The cohesion is dominated by ionic contributions, but ligand field effects are important, and are responsible for the 18-electron rule. Similarities to oxides are discussed in terms of the electronic structure. However, phonon calculations for Sr$_2$RuH$_6$ also show differences, particularly in the polarizability of the RuH$_6$ octahedra. Nevertheless, the yet to be made compounds Pb$_2$RuH$_6$ and Be$_2$FeH$_6$ are possible ferroelectrics. The electronic structure and magnetic properties of the decomposition product, FeBe$_2$ are reported. Implications of the results for H storage are discussed

A Statistics-Based Material Property Analysis to Support Ablation Simulation UQ Efforts

Accurate characterization of entry capsule heat shield material properties is a critical component in modeling and simulating Thermal Protection System (TPS) response in a prescribed aerothermal environment. The thermal decomposition of the TPS material during the pyrolysis and charring processes is typically poorly characterized and results in large uncertainties in material properties as inputs for ablation models. These material property uncertainties contribute to large design margins on flight systems and cloud re-construction efforts for data collected during flight and ground testing, making revision to existing models for entry systems more challenging. This work focuses on the following areas of interest to the ablation modeling community: a proper characterization of input probability density functions for material properties, an uncertainty propagation to identify how the uncertainties affect quantities of interest, a sensitivity and uncertainty contributor breakdown, and an analysis of how errors in input characterization contribute to errors in output distributions

Historical-institutionalist perspectives on the development of the EU budget system

The EU budget has only recently started to feature in theories of European integration. Studies typically adopt a historical-institutionalist framework, exploring notions such as path dependency. They have, however, generally been rather aggregated, or coarse-grained, in their approach. The EU budget has thus been treated as a single entity rather than a series of inter-linked institutions. This paper seeks to address these lacunae by adopting a fine-grained approach. This enables us to emphasize the connections that exist between EU budgetary institutions, in both time and space. We show that the initial set of budgetary institutions was unable, over time, to achieve consistently their treaty-based objectives. In response, rather than reform these institutions at potentially high political cost, additional institutions were layered on top of the extant structures. We thus demonstrate how some EU budgetary institutions have remained unchanged, whilst others have been added or changed over time

Prosthetic Knee for CURE Kenya: Design and Manufacturing

The Prosthetic Knee team is partnered with the CURE International Hospital in Kijabe, Kenya. In the region surrounding our client’s facility, there is a large number of lower-extremity amputations due to various infections and diseases. Often, these patients choose to undergo a more invasive transfemoral amputation to enable them to use a less expensive above-knee prosthesis. The goal of the project is to present the orthopedic workshop at CURE with a manufacturable prosthetic knee design in May of 2023 that provides through-knee amputee patients with a more affordable, aesthetically pleasing, and lightweight prosthetic option, thereby removing the need to undergo an additional amputation above the knee. The poster presents the overarching elements of the prosthetic design in addition to the recently integrated locking and damping components, which aid in the functionality of the knee. Funding for this work provided by The Collaboratory for Strategic Partnerships and Applied Research.https://mosaic.messiah.edu/engr2022/1013/thumbnail.jp