Morphometric study of the root anatomy in furcation area of mandibular first molars

Furcation involvement in periodontal disease has been a challenge for the dentist. OBJECTIVE: The aim of this study was to investigate root dimensions in the furcation area of 233 mandibular first molars. MATERIAL AND METHODS: Digital photomicrographs were used to obtain the following measurements on the buccal and lingual surfaces of each tooth: root trunk height (RT), horizontal interadicular distance obtained 1 mm (D1) and 2 mm (D2) below the fornix and interadicular angle (IA). RESULTS: Mean± standard deviation of buccal and lingual furcation measurements were, respectively, 1.37±0.78 mm and 2.04±0.89 mm for RT; 0.86±0.39 mm and 0.71±0.42 mm for D1; 1.50±0.48 mm and 1.38±0.48 mm for D2; 41.68±13.20º and 37.78±13.18º for IA. Statistically significant differences were found between all measured parameters for buccal and lingual sides (p<0.05, paired t test). CONCLUSIONS: In conclusion, the lingual furcation of mandibular first molars presented narrower entrance and longer root trunk than the buccal furcation, suggesting more limitation for instrumentation and worse prognosis to lingual furcation involvements in comparison to buccal lesions

Dental and periodontal complications of lip and tongue piercing: Prevalence and influencing factors

Background: The aim of this study was to compare the prevalence of lip and tongue piercing complications and explore the effect of ornament time wear period, habits, ornament morphology and periodontal biotype on the development of complications. Methods: One hundred and ten subjects with 110 lip and 51 tongue piercings were assessed for abnormal toothwear and/or tooth chipping/cracking (dental defects), gingival recession, clinical attachment loss and probing depth of teeth adjacent to the pierced site. Piercing habits (biting, rolling, stroking, sucking) were recorded. Results: Wear time and habits significantly affected the prevalence of dental defects and gingival recession. Pierced site significantly affected dental defects prevalence, with greater prevalence for tongue than lip piercing. Wear time significantly affected attachment loss and probing depth. Attachment loss and probing depth did not significantly differ between tongue and lip piercings. Gingival recession was significantly associated with ornament height closure and stem length of tongue ornaments. Periodontal biotype was not significantly associated with gingival recession, attachment loss and probing depth. Conclusions: Dental defects prevalence is greater for tongue than lip piercing. Gingival recession is similar for tongue and lip piercing. Longer wear time of tongue and lip piercing is associated with greater prevalence of dental defects and gingival recession, as well as greater attachment loss and probing depth of teeth adjacent to pierced sites. Ornament morphology affects gingival recession prevalence. © 2012 Australian Dental Association

Smoking cessation and response to periodontal treatment

Smoking has detrimental oral effects. The aim of this study was to review the literature related to the impact of smoking cessation on periodontal health, periodontal disease and periodontal treatment outcome as well as to review the smoking cessation strategies and the dentist&apos;s role in the smoking cessation effort. Smoking cessation seems to have a positive effect on the periodontium, to decrease the risk for incidence and progression of periodontitis and to lead to a non-significant trend for greater mean probing depth reductions after non-surgical treatment over a 12-month period. Smoking cessation effect on the periodontium should be further investigated. Dentists should inform their patients on the harmful effect of smoking and the beneficial effect of smoking cessation on oral health. They should advise, motivate and support their patients to quit smoking. Smoking-control strategies should be incorporated in dental practise. The dentist&apos;s role in the smoking cessation effort is important. Guidelines on smoking-control strategies applied in the dental office are required. © 2017 Australian Dental Associatio

Factors related to the clinical application of orthodontic mini-implants

Orthodontic mini-implants use has been increased. The purpose of this review was to analyze the factors related to the clinical application of orthodontic mini-implants. For the present study, the electronic databases PubMed, MEDLINE, Cochrane, and Google Scholar were searched for available data. The literature search was performed on the articles published from 2003 up to 2017. International peer-reviewed journal articles related to factors which are associated with the clinical application of orthodontic mini-implants were searched. Successful application of mini-implants depends on proper selection of insertion site, proper selection of mini-implant (length, diameter, tapering), proper insertion (site, predrilling, angle, primary stability, injury, and absence of adjacent anatomic structures), absence of inflammation, and proper orthodontic loading. Insertion site and mini-implant characteristics are selected based mainly on cortical bone thickness, bone density, available bone, adjacent anatomic structures, and soft-tissue thickness. Sites of high cortical bone thickness, high cancellous bone density, sufficient available bone, and thin attached gingiva are ideal for mini-implant insertion. Extremely thick cortical bone requires attention. In thick cortical bone, shorter mini-implants can be selected. For sites of low cortical bone thickness and low cancellous bone density, longer and wider mini-implants are indicated. Very thin cortical bone and very low cancellous bone density negatively affect the prognosis of mini-implants. Very narrow implants entail fracture risk. Predrilling is preferred at high bone quality sites, whereas it is used with caution or even be avoided at low bone quality sites. Angled placement might be considered to increase bone-to-implant contact and reduce root injury risk. Loading time depends on insertion torque. Successful application of mini-implants is based on proper insertion site and mini-implant characteristics selection, proper insertion, absence of inflammation, and proper orthodontic loading. Careful assessment of all the factors that might compromise mini-implant success is important for their clinical application. © 2018 Journal of International Oral Health

The adjunctive use of platelet-rich plasma in the therapy of periodontal intraosseous defects: A systematic review

Objective: The evidence for the efficacy of the adjunctive use of platelet-rich plasma (PRP) in periodontal intraosseous defects has not been systematically evaluated. The objective of this review was to address the focused question, &apos;What is the efficacy, with respect to clinical, radiographical and patient-centred outcomes, of combinations of PRP with other therapeutic bioactive agents/procedures, compared with the efficacy of the same agents/procedures without the adjunctive use of PRP in the therapy of periodontal intraosseous defects in patients with chronic periodontitis and without systemic diseases that could potentially influence the outcome of periodontal therapy?&apos; by performing a systematic review of randomized controlled clinical trials (RCTs) published in the dental literature in any language, up to and including September 2008. Material and Methods: Data sources principally included electronic databases, manually searched journals and contact with experts. In the first phase of study selection, the titles and abstracts, and in the second phase, full papers were screened independently and in duplicate by two reviewers. Results: In the first phase, 6124 potentially relevant titles and abstracts were examined. In the second phase, the full text of 20 publications was thoroughly evaluated. Eventually, 10 RCTs were selected. Conclusion: Diverse outcomes (positive and negative) have been reported for the efficacy of PRP combined with various therapeutic bioactive agents/procedures, reflecting the limited and heterogeneous data available and possibly suggesting that the specific selection of agents/procedures combined with PRP could be important. Additional research on the efficacy of each specific combination of PRP is necessary. © 2009 The Authors. Journal compilation © 2009 Blackwell Munksgaard

Effectiveness of an in-office arginine-calcium carbonate paste on dentine hypersensitivity in periodontitis patients: A double-blind, randomized controlled trial

Aim The aim of this single-centre, two-cell, double-blind, randomized controlled clinical study was to evaluate the effectiveness of an in-office desensitizing paste containing 8% arginine and calcium carbonate in providing relief on dentine hypersensitivity immediately after scaling and root planing and its sustained relief over a 6-week period. Materials and Methods Fifty periodontitis subjects presenting hypersensitivity were subjected to scaling and root planing and in-office application of either 8% arginine and calcium carbonate desensitizing paste (25 subjects, test group) or fluoride-free prophylaxis paste (25 subjects, control group). Air-blast hypersensitivity was assessed using Schiff and Visual Analogue (VAS) scales at baseline, post-scaling, post-application, 2, 4 and 6 weeks. Results At all evaluation times, the test group presented significant % reduction in hypersensitivity relative to post-scaling (t-test, p &lt; 0.05) (Schiff - Test: 57, 58.6, 60.2, 68; Control: 28.6, 22.2, 23, 23) (VAS - Test: 60, 55.6, 60.1, 68.4; Control: 25.9, 18.2, 20.6, 22.7) and significant % hypersensitivity difference relative to control (ancova, p &lt; 0.05) (Schiff: 38.9, 45.9, 47.4, 57.7; VAS: 49.1, 48.9, 52.6, 61). Conclusion The single in-office application of the 8% arginine-calcium carbonate desensitizing paste after scaling and root planing provided significant immediate reduction in dentine hypersensitivity, which sustained over a 6-week period. © 2014 John Wiley &amp; Sons A/S. Published by John Wiley &amp; Sons Ltd

A randomized, 3-month, parallel-group clinical trial to compare the efficacy of electric 3-dimensional toothbrushes vs manual toothbrushes in maintaining oral health in patients with fixed orthodontic appliances

Introduction: The aim of this single-blinded, parallel-group, randomized clinical trial was to compare the efficacy of electric 3-dimensional (3D) toothbrushes and manual toothbrushes in removing plaque and reducing gingival inflammation in orthodontic patients. Methods: Eighty adolescents with fixed orthodontic appliances in both arches were randomized at a 1:1 ratio, with an equal number of both sexes, in this examiner blinded, parallel clinical trial. Eligibility criteria included subjects aged between 12 and 16 years, good general health, nonextraction orthodontic treatment, and plaque-induced gingivitis, excluding patients with active caries or periodontitis, tooth agenesis, syndromes, disabilities, and craniofacial deformities, ≥2 cervical and/or proximal fillings, dental prostheses or dental implants, and subjects smoking or using antibiotics or medication predisposing to gingival enlargement. Patients were assigned to use either an electric 3D orthodontic toothbrush (Oral-B Pro-1000 with Oral-B Ortho head; Procter &amp; Gamble, Cincinnati, Ohio) or a manual toothbrush (Oral-B Orthodontic brush; Procter &amp; Gamble) and instructed to brush twice daily for 2 minutes. The main outcomes were: (1) plaque removal, assessed with the Modified Silness and Löe plaque index and the Modified Full Mouth Plaque Score, and (2) gingival inflammation reduction, assessed with the Modified Silness and Löe Gingival Index and the Modified Simplified Gingival Index. Measurements were taken at baseline, 1, 2, and 3 months. Randomization was achieved with 2 random sequences, one for each brush, written and sealed in opaque numbered envelopes. Blinding was possible for outcome assessment only. Results: Considerable variability was observed among patients in the values of all dependent variables. There was no difference between interventions over time for any of the outcomes, and the main effects for treatment and time were also not statistically significant. For Modified Silness and Löe plaque index, the interaction was 0.001 (95% confidence interval, −0.011 to 0.013; P = 0.89). Conclusions: No difference in plaque removal efficacy and gingival inflammation reduction was found between the electric 3D and manual toothbrushes in adolescents with fixed orthodontic appliances. Therefore, orthodontists should focus on enhancing their patients’ dental awareness and oral hygiene, along with professional prophylaxis and other oral hygiene aids, independently of the brush used. Registration: This trial was registered at ClinicalTrials.gov (Identifier: NCT02699931). Protocol: The protocol was not published before trial commencement. Funding: Electric and manual toothbrushes and toothpastes for all participants were provided by Procter &amp; Gamble (Oral-B). Miscellaneous costs were covered by the participating departments. © 2021 American Association of Orthodontist

The use of lasers in dental materials: A review

Lasers have been well integrated in clinical dentistry for the last two decades, providing clinical alternatives in the management of both soft and hard tissues with an expanding use in the field of dental materials. One of their main advantages is that they can deliver very low to very high concentrated power at an exact point on any substrate by all possible means. The aim of this review is to thoroughly analyze the use of lasers in the processing of dental materials and to enlighten the new trends in laser technology focused on dental material management. New approaches for the elaboration of dental materials that require high energy levels and delicate processing, such as metals, ceramics, and resins are provided, while time consuming laboratory procedures, such as cutting restorative materials, welding, and sintering are facilitated. In addition, surface characteristics of titanium alloys and high strength ceramics can be altered. Finally, the potential of lasers to increase the adhesion of zirconia ceramics to different substrates has been tested for all laser devices, including a new ultrafast generation of lasers. © 2021 by the authors. Licensee MDPI, Basel, Switzerland

Time- and dose-dependent mitogenic effect of basic fibroblast growth factor combined with different bone graft materials: An in vitro study

Objectives: In periodontal regeneration, the growth factor concentrations and the delivery system used are of great importance. In an attempt to assess the mitogenic effect of basic fibroblast growth factor (bFGF) on periodontal ligament (PDL) cells combined with different bone replacement materials, two allografts of cortical (DFDBA) and cancellous (DFBA) bone and an anorganic bovine material with a synthetic peptide (ABM P-15) were used. The purpose of this study was to evaluate the in vitro mitogenic effect of different doses of bFGF alone or in combination with DFDBA, DFBA and ABM P-15 on human PDL cells in a time-dependent mode. Material and methods: PDL cell cultures were derived from the mid-root of four maxillary premolars. Cells were grown and reached confluence. On day 2 of quiescence, new medium was added along with (1) 1, 5, 10 and 25 ng/ml of bFGF alone, (2) 10 mg of DFDBA, DFBA and ABM P-15 alone and (3) their combination. The mitogenic effect was determined at 24 and 48 h of culture by using a hemocytometer chamber. The cells were counted under a phase contrast microscope. Results: The results revealed that bFGF at the highest concentrations and after 48 h exerted a significant mitogenic effect on PDL cells, and also DFDBA and DFBA supported cell proliferation. Furthermore, DFDBA and DFBA enriched with bFGF had a significant mitogenic effect after 48 h of culture. ABM P-15 with 10 and 25 ng/ml of bFGF up-regulated PDL cell proliferation after 48 h of incubation. Conclusions: The findings of this study demonstrate the beneficial role of bFGF combined with DFDBA and DFBA as carriers in periodontal repair. Copyright © Blackwell Munksgaard 2006