Applicability of abrasive waterjet cutting to irradiated graphite decommissioning

Characterization, dismantling and pre-disposal management of irradiated graphite (i-graphite) have an important role in safe decommissioning of several nuclear facilities which used this material as moderator and reflector. In addition to common radiation protection issues, easily volatizing long-lived radionuclides and stored Wigner energy could be released during imprudent retrieval and processing of i-graphite. With this regard, among all cutting technologies, abrasive waterjet (AWJ) can successfully achieve all of the thermo-mechanical and radiation protection objectives. In this work, factorial experiments were designed and systematically conducted to characterize the AWJ processing parameters and the machining capability. Moreover, the limitation of dust production and secondary waste generation has been addressed since they are important aspects for radiation protection and radioactive waste management. The promising results obtained on non-irradiated nuclear graphite blocks demonstrate the applicability of AWJ as a valid technology for optimizing the retrieval, storage, and disposal of such radioactive waste. These activities would benefit from the points of view of safety, management, and costs

Thermal stability and high-temperature behavior of the natural borate colemanite: An aggregate in radiation-shielding concretes

Colemanite is a natural borate that can be used as an aggregate in neutron-radiation shielding concretes. In this study, we report its thermal behavior, up to 500 degrees C, by describing: 1) its dehydration mechanisms and 2) its thermo-elastic parameters. The thermal expansion of colemanite is significantly anisotropic. The refined volume thermal expansion coefficient at ambient conditions is: alpha(V0) = 4.50(10).10(-5) K-1. The loss of structural H2O occurs at least from similar to 240 degrees C, and at T > 325 degrees C an irreversible amorphization occurs, followed by a complete dehydration. The potential implications on the use of colemanite as concrete-aggregate are discussed. (C) 2019 Elsevier Ltd. All rights reserved

Cutting-edge R&D activities of CIRTEN in support of the Technology Park annexed to the Italian National Repository of radioactive waste

R&D activities taking place at the institutions belonging to Consorzio Interuniversitario per la Ricerca TEcnologica Nucleare are here presented and discussed. A special focus is on Technology Park annexed to the Italian National Repository of radioactive waste

Pilot scale validation campaign of gel dosimetry for pre-treatment quality assurance in stereotactic radiotherapy

Purpose: Complex stereotactic radiotherapy treatment plans require prior verification. A gel dosimetry system was developed and tested to serve as a high-resolution 3D dosimeter for Quality Assurance (QA) purposes.Materials and Methods: A modified version of a polyacrylamide polymer gel dosimeter based on chemical response inhibition was employed. Different sample geometries (cuvettes and phantoms) were manufactured for calibration and QA acquisitions. Irradiations were performed with a Varian Trilogy linac, and analyses of irradiated gel dosimeters were performed via MRI with a 1.5 T Philips Achieva at 1 mm3 or 2 mm3 isotropic spatial resolution. To assess reliability of polymer gel data, 54 stereotactic clinical treatment plans were delivered both on dosimetric gel phantoms and on the Delta4 dosimeter. Results from the two devices were evaluated through a global gamma index over a range of acceptance criteria and compared with each other.Results: A quantitative and tunable control of dosimetric gel response sensitivity was achieved through chemical inhibition. An optimized MRI analysis protocol allowed to acquire high resolution phantom dose data in time -frames of approximate to 1 h. Conversion of gel dosimeter data into absorbed dose was achieved through internal calibration. Polymer gel dosimeters (2 mm3 resolution) and Delta4 presented an agreement within 4.8 % and 2.7 % at the 3 %/1 mm and 2 %/2 mm gamma criteria, respectively.Conclusions: Gel dosimeters appear as promising tools for high resolution 3D QA. Added complexity of the gel dosimetry protocol may be justifiable in case of small target volumes and steep dose gradients

Notulae to the Italian alien vascular flora: 2

In this contribution, new data concerning the Italian distribution of alien vascular flora are presented. It includes new records, exclusions and confirmations for Italy or for Italian administrative regions for taxa in the genera Ageratum, Aster, Buddleja, Cedrus, Centranthus, Cephalotaxus, Clerodendrum, Cotoneaster, Cyperus, Honorius, Lantana, Ligustrum, Morus, Muscari, Oenothera, Opuntia, Platycladus, Plumbago, Pseudotsuga, Sedum, Sporobolus, Stachys, Ulmus and Yucca. A nomen novum, Stachys talbotii, is proposed as a replacement name for Sideritis purpurea

Notulae to the Italian alien vascular flora: 2

In this contribution, new data concerning the Italian distribution of alien vascular flora are presented. It includes new records, exclusions and confirmations for Italy or for Italian administrative regions for taxa in the genera Ageratum, Aster, Buddleja, Cedrus, Centranthus, Cephalotaxus, Clerodendrum, Cotoneaster, Cyperus, Honorius, Lantana, Ligustrum, Morus, Muscari, Oenothera, Opuntia, Platycladus, Plumbago, Pseudotsuga, Sedum, Sporobolus, Stachys, Ulmus and Yucca. A nomen novum, Stachys talbotii, is proposed as a replacement name for Sideritis purpurea

Cutting-edge R&D activities of CIRTEN in support of the Technology Park annexed to the Italian National Repository of radioactive waste

R&D activities taking place at the institutions belonging to Consorzio Interuniversitario per la Ricerca TEcnologica Nucleare are here presented and discussed. A special focus is on Technology Park annexed to the Italian National Repository of radioactive waste

Notulae to the Italian native vascular flora: 8.

In this contribution, new data concerning the distribution of native vascular flora in Italy are presented. It includes new records, confirmations, exclusions, and status changes to the Italian administrative regions for taxa in the genera Ajuga, Chamaemelum, Clematis, Convolvulus, Cytisus, Deschampsia, Eleocharis, Epipactis, Euphorbia, Groenlandia, Hedera, Hieracium, Hydrocharis, Jacobaea, Juncus, Klasea, Lagurus, Leersia, Linum, Nerium, Onopordum, Persicaria, Phlomis, Polypogon, Potamogeton, Securigera, Sedum, Soleirolia, Stachys, Umbilicus, Valerianella, and Vinca. Nomenclatural and distribution updates, published elsewhere, and corrigenda are provided as Suppl. material 1