Geologically constrained evolutionary geomechanical modelling of diapir and basin evolution: a case study from the Tarfaya basin, West African coast

We systematically incorporate burial history, sea floor geometry and tectonic loads from a sequential kinematic restoration model into a 2D evolutionary geomechanical model that simulates the formation of the Sandia salt diapir, Tarfaya basin, NW African Coast. We use a poro-elastoplastic description for the sediment behaviour and a viscoplastic description for the salt. Sedimentation is coupled with salt flow and regional shortening to determine the sediment porosity and strength and to capture the interaction between salt and sediments. We find that temporal and spatial variation in sedimentation rate is a key control on the kinematic evolution of the salt system. Incorporation of sedimentation rates from the kinematic restoration at a location east of Sandia leads to a final geomechanical model geometry very similar to that observed in seismic reflection data. We also find that changes in the variation of shortening rates can significantly affect the present-day stress state above salt. Overall, incorporating kinematic restoration data into evolutionary models provides insights into the key parameters that control the evolution of geologic systems. Furthermore, it enables more realistic evolutionary geomechanical models, which, in turn, provide insights into sediment stress and porosity

A comprehensive study of geothermal heating and cooling systems

The final publication is available at Elsevier via https://doi.org/10.1016/j.scs.2018.09.036� 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/Geothermal heat is an energy source that is local, reliable, resilient, environmentally-friendly, and sustainable. This natural energy is produced from the heat within the earth, and has different applications, such as heating and cooling of buildings, generating electricity, providing warm/cold water for agricultural products in greenhouses, and balneological use. Geothermal energy is not dependent on weather or climate and can supply heat and electricity almost continuously throughout the year. It may even be possible to use geothermal projects as �thermal batteries�, wherein waste or collected heat is stored for future use, even seasonal use, making geothermal energy �renewable� at a time scale of years. Extensive research has been carried out on different technologies and applications of geothermal energy, but comprehensive assessment of geothermal heating and cooling systems is relevant because of changing understanding, scale of application, and technology evolution. This study presents a general overview of geothermal heating and cooling systems. We provide an introduction to energy and the environment as well as the relationship between them; a brief history of geothermal energy; a discussion of district energy systems; a review of geothermal heating and cooling systems; a survey of geothermal energy distribution systems; an overview of ground source heat pumps; and, a discussion of ground heat exchangers. Recognition and accommodation of several factors addressed and discussed in our review will enhance the design and implementation of any geothermal heating or cooling system

Patient, informal caregiver and care provider acceptance of a hospital in the home program in Ontario, Canada

<p>Abstract</p> <p>Background</p> <p>Hospital in the home programs have been implemented in several countries and have been shown to be safe substitutions (alternatives) to in-patient hospitalization. These programs may offer a solution to the increasing demands made on tertiary care facilities and to surge capacity. We investigated the acceptance of this type of care provision with nurse practitioners as the designated principal home care providers in a family medicine program in a large Canadian urban setting.</p> <p>Methods</p> <p>Patients requiring hospitalization to the family medicine service ward, for any diagnosis, who met selection criteria, were invited to enter the hospital in the home program as an alternative to admission. Participants in the hospital in the home program, their caregivers, and the physicians responsible for their care were surveyed about their perceptions of the program. Nurse practitioners, who provided care, were surveyed and interviewed.</p> <p>Results</p> <p>Ten percent (104) of admissions to the ward were screened, and 37 patients participated in 44 home hospital admissions. Twenty nine patient, 17 caregiver and 38 provider surveys were completed. Most patients (88%–100%) and caregivers (92%–100%) reported high satisfaction levels with various aspects of health service delivery. However, a significant proportion in both groups stated that they would select to be treated in-hospital should the need arise again. This was usually due to fears about the safety of the program. Physicians (98%–100%) and nurse practitioners also rated the program highly. The program had virtually no negative impact on the physician workload. However nurse practitioners felt that the program did not utilize their full expertise.</p> <p>Conclusion</p> <p>Provision of hospital level care in the home is well received by patients, their caregivers and health care providers. As a new program, investment in patient education about program safety may be necessary to ensure its long term success. A small proportion of hospital admissions were screened for this program. Appropriate dissemination of program information to family physicians should help buy-in and participation. Nurse practitioners' skills may not be optimally utilized in this setting.</p

Combinatorial hydrogel library enables identification of materials that mitigate the foreign body response in primates

The foreign body response is an immune-mediated reaction that can lead to the failure of implanted medical devices and discomfort for the recipient. There is a critical need for biomaterials that overcome this key challenge in the development of medical devices. Here we use a combinatorial approach for covalent chemical modification to generate a large library of variants of one of the most widely used hydrogel biomaterials, alginate. We evaluated the materials in vivo and identified three triazole-containing analogs that substantially reduce foreign body reactions in both rodents and, for at least 6 months, in non-human primates. The distribution of the triazole modification creates a unique hydrogel surface that inhibits recognition by macrophages and fibrous deposition. In addition to the utility of the compounds reported here, our approach may enable the discovery of other materials that mitigate the foreign body response.Leona M. and Harry B. Helmsley Charitable Trust (3-SRA-2014-285-M-R)United States. National Institutes of Health (EB000244)United States. National Institutes of Health (EB000351)United States. National Institutes of Health (DE013023)United States. National Institutes of Health (CA151884)United States. National Institutes of Health (P41EB015871-27)National Cancer Institute (U.S.) (P30-CA14051

The Geomechanics of CO2 Storage in Deep Sedimentary Formations

This paper provides a review of the geomechanics and modeling of geomechanics associated with geologic carbon storage (GCS), focusing on storage in deep sedimentary formations, in particular saline aquifers. The paper first introduces the concept of storage in deep sedimentary formations, the geomechanical processes and issues related with such an operation, and the relevant geomechanical modeling tools. This is followed by a more detailed review of geomechanical aspects, including reservoir stress-strain and microseismicity, well integrity, caprock sealing performance, and the potential for fault reactivation and notable (felt) seismic events. Geomechanical observations at current GCS field deployments, mainly at the In Salah CO2 storage project in Algeria, are also integrated into the review. The In Salah project, with its injection into a relatively thin, low-permeability sandstone is an excellent analogue to the saline aquifers that might be used for large scale GCS in parts of Northwest Europe, the U.S. Midwest, and China. Some of the lessons learned at In Salah related to geomechanics are discussed, including how monitoring of geomechanical responses is used for detecting subsurface geomechanical changes and tracking fluid movements, and how such monitoring and geomechanical analyses have led to preventative changes in the injection parameters. Recently, the importance of geomechanics has become more widely recognized among GCS stakeholders, especially with respect to the potential for triggering notable (felt) seismic events and how such events could impact the long-term integrity of a CO{sub 2} repository (as well as how it could impact the public perception of GCS). As described in the paper, to date, no notable seismic event has been reported from any of the current CO{sub 2} storage projects, although some unfelt microseismic activities have been detected by geophones. However, potential future commercial GCS operations from large power plants will require injection at a much larger scale. For such largescale injections, a staged, learn-as-you-go approach is recommended, involving a gradual increase of injection rates combined with continuous monitoring of geomechanical changes, as well as siting beneath a multiple layered overburden for multiple flow barrier protection, should an unexpected deep fault reactivation occur

Analysis of Deformation Measurements for Reservoir Managemen

If reservoir deformation measurements can be analyzed to give consistent and coherent information on the volume changes and shear distortions taking place in the reservoir, data may be used for reservoir management and optimization of production and injection operations. Deformations may be measured at surface or at depth using a variety of technologies with different costs, ease of data collection, precision, areal coverage, and so on. The two most common techniques are the precision laser level survey, and the installation of geophysical tilt meters. Design of a suitable monitoring network for specific cases requires forward modeling using solutions that vary from spatial numerical integration of simple Green's functions to a full nonhomogeneous three-dimensional finite element model. Rigorous deformation analysis falls into two categories: direct inversion and optimization of a forward model through error minimization. Three approaches are discussed: a direct inversion based on a nucleus-of-strain formulation, a multiparameter optimization of a single source function for hydraulic fracture analysis, and a displacement discontinuity forward optimization technique using a limitedpopulation of elements. Interpretation cannot be done in isolation: other data sources, including the project history, must be integrated to maximize the utility of the deformation analyses. As a final step, the data are used to help refine mathematical stress-flow reservoir models, which in turn become better predictors of deformation as well as oil production

Evaluation of slurry injection technology for management of drilling wastes.

Each year, thousands of new oil and gas wells are drilled in the United States and around the world. The drilling process generates millions of barrels of drilling waste each year, primarily used drilling fluids (also known as muds) and drill cuttings. The drilling wastes from most onshore U.S. wells are disposed of by removing the liquids from the drilling or reserve pits and then burying the remaining solids in place (called pit burial). This practice has low cost and the approval of most regulatory agencies. However, there are some environmental settings in which pit burial is not allowed, such as areas with high water tables. In the U.S. offshore environment, many water-based and synthetic-based muds and cuttings can be discharged to the ocean if discharge permit requirements are met, but oil-based muds cannot be discharged at all. At some offshore facilities, drilling wastes must be either hauled back to shore for disposal or disposed of onsite through an injection process