Pre-terrestrial oxidation products in carbonaceous meteorites identified by Mossbauer spectroscopy

The occurrence of ferric bearing assemblages, comprising phyllosilicates, oxide hydroxides and magnetite, in carbonaceous chondrites (CC) indicates that these meteorites underwent pre-terrestrial, sub-aqueous oxidation reactions. Reported here are results of a Mossbauer spectral study of a suite of CC demonstrating that a variety of ferrous and ferric bearing phases may be distinguished in different classes of this meteorite type

Design, fabrication and test of prototype furnace for continuous growth of wide silicon ribbon

A program having the overall objective of growing wide, thin silicon dendritic web crystals quasi-continuously from a semi-automated facility is discussed. The design considerations and fabrication of the facility as well as the test and operation phase are covered; detailed engineering drawings are included as an appendix. During the test and operation phase of the program, more than eighty growth runs and numerous thermal test runs were performed. At the conclusion of the program, 2.4 cm wide web was being grown at thicknesses of 100 to 300 micrometers. As expected, the thickness and growth rate are closely related. Solar cells made from this material were tested at NASA-Lewis and found to have conversion efficiencies comparable to devices fabricated from Czochralski material

Silicon ribbon study program

The feasibility is studied of growing wide, thin silicon dendritic web for solar cell fabrication and conceptual designs are developed for the apparatus required. An analysis of the mechanisms of dendritic web growth indicated that there were no apparent fundamental limitations to the process. The analysis yielded quantitative guidelines for the thermal conditions required for this mode of crystal growth. Crucible designs were then investigated: the usual quartz crucible configurations and configurations in which silicon itself is used for the crucible. The quartz crucible design is feasible and is incorporated into a conceptual design for a laboratory scale crystal growth facility capable of semi-automated quasi-continuous operation

Hypothalamic gene expression during voluntary hypophagia in the Sprague-Dawley rat on withdrawal of the palatable liquid diet, Ensure

Copyright © 2014 Elsevier Inc. All rights reserved.Peer reviewedPostprin

Using shared goal setting to improve access and equity: a mixed methods study of the Good Goals intervention

Background: Access and equity in children’s therapy services may be improved by directing clinicians’ use of resources toward specific goals that are important to patients. A practice-change intervention (titled ‘Good Goals’) was designed to achieve this. This study investigated uptake, adoption, and possible effects of that intervention in children’s occupational therapy services. Methods: Mixed methods case studies (n = 3 services, including 46 therapists and 558 children) were conducted. The intervention was delivered over 25 weeks through face-to-face training, team workbooks, and ‘tools for change’. Data were collected before, during, and after the intervention on a range of factors using interviews, a focus group, case note analysis, routine data, document analysis, and researchers’ observations. Results: Factors related to uptake and adoptions were: mode of intervention delivery, competing demands on therapists’ time, and leadership by service manager. Service managers and therapists reported that the intervention: helped therapists establish a shared rationale for clinical decisions; increased clarity in service provision; and improved interactions with families and schools. During the study period, therapists’ behaviours changed: identifying goals, odds ratio 2.4 (95% CI 1.5 to 3.8); agreeing goals, 3.5 (2.4 to 5.1); evaluating progress, 2.0 (1.1 to 3.5). Children’s LoT decreased by two months [95% CI −8 to +4 months] across the services. Cost per therapist trained ranged from £1,003 to £1,277, depending upon service size and therapists’ salary bands. Conclusions: Good Goals is a promising quality improvement intervention that can be delivered and adopted in practice and may have benefits. Further research is required to evaluate its: (i) impact on patient outcomes, effectiveness, cost-effectiveness, and (ii) transferability to other clinical contexts

Arcuate nucleus homeostatic systems reflect blood leptin concentration but not feeding behaviour during scheduled feeding on a high-fat diet in mice

Acknowledgements T.B. was funded by a CASE studentship from the BBSRC and AstraZeneca. J.B. was a summer student from Bordeaux Sciences Agro and funded by student laboratory experience grant from the British Society of Neuroendocrinology. The authors are also grateful for funding from the Scottish Government, and from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreements 266408 (Full4Health) and 245009 (NeuroFAST).Peer reviewedPublisher PD

Large-area sheet task advanced dendritic web growth development

The thermal models used for analyzing dendritic web growth and calculating the thermal stress were reexamined to establish the validity limits imposed by the assumptions of the models. Also, the effects of thermal conduction through the gas phase were evaluated and found to be small. New growth designs, both static and dynamic, were generated using the modeling results. Residual stress effects in dendritic web were examined. In the laboratory, new techniques for the control of temperature distributions in three dimensions were developed. A new maximum undeformed web width of 5.8 cm was achieved. A 58% increase in growth velocity of 150 micrometers thickness was achieved with dynamic hardware. The area throughput goals for transient growth of 30 and 35 sq cm/min were exceeded

Large-area sheet task: Advanced dendritic-web-growth development

Thermally generated stresses in the growing web crystal were reduced. These stresses, which if too high cause the ribbon to degenerate, were reduced by a factor of three, resulting in the demonstrated growth of high-quality web crystals to widths of 5.4 cm. This progress was brought about chiefly by the application of thermal models to the development of low-stress growth configurations. A new temperature model was developed which can analyze the thermal effects of much more complex lid and top shield configurations than was possible with the old lumped shield model. Growth experiments which supplied input data such as actual shield temperature and melt levels were used to verify the modeling results. Desirable modifications in the melt level-sensing circuitry were made in the new experimental web growth furnace, and this furnace has been used to carry out growth experiments under steady-state conditions. New growth configurations were tested in long growth runs at Westinghouse AESD which produced wider, lower stress and higher quality web crystals than designs previously used

Heuristic Refinement Method for the Derivation of Protein Solution Structures: Validation on Cytochrome B562

A method is described for determining the family of protein structures compatible with solution data obtained primarily from nuclear magnetic resonance (NMR) spectroscopy. Starting with all possible conformations, the method systematically excludes conformations until the remaining structures are only those compatible with the data. The apparent computational intractability of this approach is reduced by assembling the protein in pieces, by considering the protein at several levels of abstraction, by utilizing constraint satisfaction methods to consider only a few atoms at a time, and by utilizing artificial intelligence methods of heuristic control to decide which actions will exclude the most conformations. Example results are presented for simulated NMR data from the known crystal structure of cytochrome b562 (103 residues). For 10 sample backbones an average root-mean-square deviation from the crystal of 4.1 A was found for all alpha-carbon atoms and 2.8 A for helix alpha-carbons alone. The 10 backbones define the family of all structures compatible with the data and provide nearly correct starting structures for adjustment by any of the current structure determination methods