211 research outputs found
Multidimensional analysis of data obtained in experiments with X-ray emulsion chambers and extensive air showers
Nonparametric statistical methods are used to carry out the quantitative comparison of the model and the experimental data. The same methods enable one to select the events initiated by the heavy nuclei and to calculate the portion of the corresponding events. For this purpose it is necessary to have the data on artificial events describing the experiment sufficiently well established. At present, the model with the small scaling violation in the fragmentation region is the closest to the experiments. Therefore, the treatment of gamma families obtained in the Pamir' experiment is being carried out at present with the application of these models
Formation of laser plasma channels in a stationary gas
The formation of plasma channels with nonuniformity of about +- 3.5% has been
demonstrated. The channels had a density of 1.2x10^19 cm-3 with a radius of 15
um and with length >= 2.5 mm. The channels were formed by 0.3 J, 100 ps laser
pulses in a nonflowing gas, contained in a cylindrical chamber. The laser beam
passed through the chamber along its axis via pinholes in the chamber walls. A
plasma channel with an electron density on the order of 10^18 - 10^19 cm-3 was
formed in pure He, N2, Ar, and Xe. A uniform channel forms at proper time
delays and in optimal pressure ranges, which depend on the sort of gas. The
influence of the interaction of the laser beam with the gas leaking out of the
chamber through the pinholes was found insignificant. However, the formation of
an ablative plasma on the walls of the pinholes by the wings of the radial
profile of the laser beam plays an important role in the plasma channel
formation and its uniformity. A low current glow discharge initiated in the
chamber slightly improves the uniformity of the plasma channel, while a high
current arc discharge leads to the formation of overdense plasma near the front
pinhole and further refraction of the laser beam. The obtained results show the
feasibility of creating uniform plasma channels in non-flowing gas targets.Comment: 15 pages, 7 figures, submitted to Physics of Plasma
Recommended from our members
Secondary Electron Emission from Dielectric Materials of a Hall Thruster with Segmented Electrodes
The discharge parameters in Hall thrusters depend strongly on the yield of secondary electron emission from channel walls. Comparative measurements of the yield of secondary electron emission at low energies of primary electrons were performed for several dielectric materials used in Hall thrusters with segmented electrodes. The measurements showed that at low energies of primary electrons the actual energetic dependencies of the total yield of secondary electron emission could differ from fits, which are usually used in theoretical models. The observed differences might be caused by electron backscattering, which is dominant at lower energies and depends strongly on surface properties. Fits based on power or linear laws are relevant at higher energies of primary electrons, where the bulk material properties play a decisive role
On a possibility of inelasticity partial coefficient K sub gamma determination in pi C and pi Pb interactions at 10 to the 14th power eV (experiment PAMIR 1)
The investigation of hadron-nuclear interactions in Pamir experiment is carried out by means of X-ray emulsion chambers of two types: carbon (C) and lead (Pb). While comparing the results from the chambers of both types it was found a discrepancy in n sub h and E sub h(1)R values. The observed discrepancy in C and Pb chambers is connected with the difference in values of effective coefficients of energy transfer to the soft component K sub eff for C and Pb chambers
Operation of ferroelectric plasma sources in a gas discharge mode
Ferroelectric plasma sources in vacuum are known as sources of ablative plasma, formed due to surface discharge. In this paper, observations of a gas discharge mode of operation of the ferroelectric plasma sources (FPS) are reported. The gas discharge appears at pressures between approximately 20 and approximately 80 Torr. At pressures of 1-20 Torr, there is a transition from vacuum surface discharge to the gas discharge, when both modes coexist and the surface discharges sustain the gas discharge. At pressures between 20 and 80 Torr, the surface discharges are suppressed, and FPS operate in pure gas discharge mode, with the formation of almost uniform plasma along the entire surface of the ceramics between strips. The density of the expanding plasma is estimated to be about 1013 cm-3 at a distance of 5.5 mm from the surface. The power consumption of the discharge is comparatively low, making it useful for various applications. This paper also presents direct measurements of the yield of secondary electron emission from ferroelectric ceramics, which, at low energies of primary electrons, is high and dependent on the polarization of the ferroelectric materia
Recommended from our members
Operation of a Segmented Hall Thruster with Low-sputtering Carbon-velvet Electrodes
Carbon fiber velvet material provides exceptional sputtering resistance properties exceeding those for graphite and carbon composite materials. A 2 kW Hall thruster with segmented electrodes made of this material was operated in the discharge voltage range of 200–700 V. The arcing between the floating velvet electrodes and the plasma was visually observed, especially, during the initial conditioning time, which lasted for about 1 h. The comparison of voltage versus current and plume characteristics of the Hall thruster with and without segmented electrodes indicates that the magnetic insulation of the segmented thruster improves with the discharge voltage at a fixed magnetic field. The observations reported here also extend the regimes wherein the segmented Hall thruster can have a narrower plume than that of the conventional nonsegmented thruster
Secondary electron emission from dielectric materials of a Hall thruster with segmented electrodes
The discharge parameters in Hall thrusters depend strongly on the yield of secondary electron emission from channel walls. Comparative measurements of the yield of secondary electron emission at low energies of primary electrons were performed for several dielectric materials used in Hall thrusters with segmented electrodes. The measurements showed that at low energies of primary electrons the actual energetic dependencies of the total yield of secondary electron emission could differ from fits, which are usually used in theoretical models. The observed differences might be caused by electron backscattering, which is dominant at lower energies and depends strongly on surface properties. Fits based on power or linear laws are relevant at higher energies of primary electrons, where the bulk material properties play a decisive role
Inhomogeneous magnetism in La-doped CaMnO3. (I) Nanometric-scale spin clusters and long-range spin canting
Neutron measurements on Ca{1-x}La{x}MnO3 (0.00 <= x <= 0.20) reveal the
development of a liquid-like spatial distribution of magnetic droplets of
average size ~10 Angstroms, the concentration of which is proportional to x
(one cluster per ~60 doped electrons). In addition, a long-range ordered
ferromagnetic component is observed for ~0.05 < x < ~0.14. This component is
perpendicularly coupled to the simple G-type antiferromagnetic (G-AFM)
structure of the undoped compound, which is a signature of a G-AFM + FM
spin-canted state. The possible relationship between cluster formation and the
stabilization of a long-range spin-canting for intermediate doping is
discussed.Comment: Submitted to Physical Review
- …