The Reframing of Methodology: Revisiting a PhD Study

The paper draws on a PhD study to explore some methodological dilemmas associated with the execution of qualitative research when framed within positivist study design. The PhD was linked to an externally funded research project which evaluated the implementation of a custody-based intervention in the secure estate. While the PhD was conceived as a qualitative study, informed by interpretivist methodology and associated epistemology, the wider funded study was informed by positivist tradition and used a quantitative method. This led to dilemmas of both practical and methodological nature. The author revisits her study's methodological position to review issues raised by the research design and suggests an alternative proposal informed methodologically by critical realism which may better serve the study's interests. In doing so, the paper suggests how revisiting previous research may assist us in gaining methodological understanding and allow us to reframe our future endeavours to more useful end

An unusual case of an isolated capitellar fracture of the right elbow in a child: a case report

<p>Abstract</p> <p>Introduction</p> <p>Although elbow fractures have a high incidence in the pediatric population, fractures of the capitellum are almost exclusively observed in individuals older than 12 years of age. Due to their rarity in children, reports with large numbers of cases are lacking in the literature and the surgical treatment options are poorly defined.</p> <p>Case presentation</p> <p>We present the case of an 11-year-old Portuguese girl with a displaced fracture of the capitellum of the right elbow, a typical Hahn-Steinthal or Type 1 fracture, which was followed for one year. The treatment and outcome of this fracture are described. Our patient underwent an open reduction and internal fixation with two cannulated screws. There were no complications and normal elbow function was recovered.</p> <p>Conclusion</p> <p>The authors believe that cannulated screw fixation is a reliable method of treatment for Type 1 capitellar fracture in children because it enables good interfragmentary compression, early mobilization, faster functional elbow recovery and implant removal is rarely necessary.</p

Advanced Burner Reactors with Breed-and-Burn Thorium Blankets for Improved Economics and Resource Utilization

This paper assesses the feasibility of designing seed-and-blanket (S&amp;B) sodium-cooled fast reactor (SFR) cores to generate a significant fraction of the core power from radial thorium-fueled blankets that operate in the breed-and-burn (B&amp;B) mode. The radiation damage on the cladding material in both seed and blanket does not exceed the presently acceptable constraint of 200 displacements per atom (dpa). The S&amp;B core is designed to have an elongated seed (or driver) to maximize the fraction of neutrons that radially leak into the subcritical B&amp;B blanket and reduce the neutron loss via axial leakage. A specific objective of this study is to maximize the fraction of core power generated by the B&amp;B blanket that is proportional to the neutron leakage rate from the seed to the blanket. Since the blanket feed fuel is very inexpensive and requires no reprocessing and remote fuel fabrication, a larger fraction of power from the blanket will result in a lower fuel cycle cost per unit of electricity generated by the SFR core. It is found possible to design the seed of the S&amp;B core to have a lower transuranics (TRU) conversion ratio (CR) than a conventional advanced burner reactor (ABR) core without deteriorating core safety. This is due to the unique synergism between a low CR seed and the B&amp;B thorium blanket. The benefits of the synergism are maximized when using an annular seed surrounded by inner and outer thorium blankets. Two high-performance S&amp;B cores are designed to benefit from the annular seed concept: (1) an ultra-long-cycle core having a CR = 0.5 seed and a cycle length of ∼7 effective full-power years (EFPYs) and (2) a high-transmutation core having a TRU CR of 0.0. The TRU transmutation rate of the latter core is comparable to that of the reference ABR with a CR of 0.5, and the thorium blanket can generate close to 60% of the core power. Because of the high blanket power fraction along with the high discharge burnup of the CR = 0 seed, the reprocessing capacity per unit of core power required by this S&amp;B core is only approximately 1/6th that of the reference ABR core with a TRU CR of 0.5. Although the seed fuel CR is nearly zero, the burnup reactivity swing is low enough to enable a cycle length of more than 4 EFPYs. This is attributed to a combination of reactivity gain in the thorium blankets over the cycle and the relatively high heavy metal inventory. Moreover, despite the very low leakage, the S&amp;B cores feature a less positive coolant reactivity coefficient and large enough negative Doppler coefficient even when using nonfertile fuel for the seed, because of the unique physics properties of the U and Th in the thorium blankets. With the long cycles, the S&amp;B SFR is expected to have a higher capacity factor, and therefore a lower cost of electricity, than conventional ABRs. The discharge burnup of the thorium blanket fuel is typically 70 MWd/kg such that the thorium fuel utilization is approximately 12 times that of natural uranium in light water reactors. A sensitivity study is subsequently undertaken to quantify the trade-off between the core performances and several design variables: amount of zirconium in the inert matrix seed fuel, active core height, coolant pressure drop, and radiation damage constraint. The effect of the criterion used for quantifying acceptable radiation damage is evaluated as well. It is concluded that a viable S&amp;B core can be designed without significant deviation from typical SFR core design practices

Synergic effects between N-heterocyclic carbene and chelating benzylidene-ether ligands toward the initiation step of Hoveyda-Grubbs type Ru complexes

Synergic effects between ancillary N-heterocyclic carbenes [(1,3-bis(2,4,6-trimethylphenyl)-1,3-imidazoline-2-ylidene or 1,3-bis(2,6-diisopropylphenyl)-1,3-imidazoline-2-ylidene] and chelating benzylidene ether ligands were investigated by studying initiation rates and kinetic profiles of Hoveyda-Grubbs (HG) type Ru complexes. A newly designed Ru-benzylidene-oxazinone precatalyst 4 was compared with Grela and Blechert complexes bearing modified isopropyloxy chelating leaving groups and with the standard HG complex to understand how the ancillary and the leaving ligands interact and influence the catalytic activity