33,560 research outputs found
FE modelling of bond interaction of FRP bars to concrete
In this paper a computational modelling approach is used to investigate the bond behaviour of fibre-reinforced plastic (FRP) bars in concrete. Two finite element packages (ANSYS and ABAQUS) are used to model the bond interaction of FRP reinforcing bars in cubes and beams. The main purpose of this work is to develop additional understanding of how FRP bars ‘cooperate’ with concrete to sustain the pullout load. Two modelling approaches are presented. In the first approach, a spring describing the behaviour of short embedment lengths in pullout tests was used for predicting the behaviour of longer embedment lengths. In the second approach, spring characteristics obtained from an experimentally determined bond stress against anchorage length envelope are used in FE modelling of beams. Both approaches showed good agreement between analytical and experimental results. However, further development on the analytical modelling of the bond interaction is required, in order to consider the effect of all parameters that influence bond
General covariant geometric momentum, gauge potential and a Dirac fermion on a two-dimensional sphere
For a particle that is constrained on an ()-dimensional ()
curved surface, the Cartesian components of its momentum in -dimensional
flat space is believed to offer a proper form of momentum for the particle on
the surface, which is called the geometric momentum as it depends on the mean
curvature. Once the momentum is made general covariance, the spin connection
part can be interpreted as a gauge potential. The present study consists in two
parts, the first is a discussion of the general framework for the general
covariant geometric momentum. The second is devoted to a study of a Dirac
fermion on a two-dimensional sphere and we show that there is the generalized
total angular momentum whose three cartesian components form the
algebra, obtained before by consideration of dynamics of the particle, and we
demonstrate that there is no curvature-induced geometric potential for the
fermion.Comment: 8 pages, no figure. Presentation improve
Topology optimization of a novel fuselage structure in the conceptual design phase
Purpose: In recent years, innovative aircraft designs have been investigated by researchers to address the environmental and economic issues for the purpose of green aviation. To keep air transport competitive and safe, it is necessary to maximize design efficiencies of the aircrafts in terms of weight and cost. The purpose of this paper is to focus on the research which has led to the development of a novel lattice fuselage design of a forward-swept wing aircraft in the conceptual phase by topology optimization technique. Design/methodology/approach: In this paper, the fuselage structure is modelled with two different types of elements – 1D beam and 2D shell – for the validation purpose. Then, the finite element analysis coupled with topology optimization is performed to determine the structural layouts indicating the efficient distributed reinforcements. Following that, the optimal fuselage designs are obtained by comparison of the results of 1D and 2D models. Findings: The topological results reveal the need for horizontal stiffeners to be concentrated near the upper and lower extremities of the fuselage cross section and a lattice pattern of criss-cross stiffeners should be well-placed along the sides of the fuselage and near the regions of window locations. The slight influence of windows on the optimal reinforcement layout is observed. To form clear criss-cross stiffeners, modelling the fuselage with 1D beam elements is suggested, whereas the less computational time is required for the optimization of the fuselage modelled using 2D shell elements. Originality/value: The authors propose a novel lattice fuselage design in use of topology optimization technique as a powerful design tool. Two types of structural elements are examined to obtain the clear reinforcement detailing, which is also in agreement with the design of the DLR (German Aerospace Center) demonstrator. The optimal lattice layout of the stiffeners is distinctive to the conventional semi-monocoque fuselage design and this definitely provides valuable insights into the more efficient utilization of composite materials for novel aircraft designs
- …