Exploring taboo issues in professional sport through a fictional approach

While the need to consider life course issues in elite sport research and practice is increasingly recognised, some experiences still seem to be considered too dangerous to explore. Consequently, stories of these experiences are silenced and the ethical and moral questions they pose fail to be acknowledged, understood or debated. This paper presents an ethnographic fiction through which we explore a sensitive set of experiences that were uncovered during our research with professional sportspeople. Through a multi‐layered reconstruction, the story reveals the complex, but significant, relationships that exist between identity, cultural narratives and embodied experiences. After the telling we consider how the story has stimulated reflective practice among students, researchers and practitioners. While there are risks involved in writing and sharing taboo stories, the feedback we have received suggests that storytelling can be an effective pedagogical tool in education and professional development

2008 FORUM Questions

What qualities of the helping person are needed for care in the context of fear?Are the strategies of care different when fear is all around us

Fluidized Bed Steam Reforming of INEEL SBW Using THORsm Mineralizing Technology

Sodium bearing waste (SBW) disposition is one of the U.S. Department of Energy (DOE) Idaho Operation Office’s (NE-ID) and State of Idaho’s top priorities at the Idaho National Engineering and Environmental Laboratory (INEEL). Many studies have resulted in the identification of five treatment alternatives that form a short list of perhaps the most appropriate technologies for the DOE to select from. The alternatives are (a) calcination with maximum achievable control technology (MACT) upgrade, (b) steam reforming, (c) cesium ion exchange (CsIX) with immobilization, (d) direct evaporation, and (e) vitrification. Each alternative has undergone some degree of applied technical development and preliminary process design over the past four years. DOE desired further experimental data, with regard to steam reforming technology, to make informed decisions concerning selection of treatment technology for SBW. Mineralizing steam reforming technology, offered by THOR Treatment Technologies, LLC would produce a denitrated, granular mineral waste form using a high-temperature fluidized bed process. A pilot scale demonstration of the technology was performed in a 15-cm-diameter reactor vessel September 27 through October 1, 2004. The pilot scale equipment is owned by the DOE, and located at the Science and Technology Applications Research (STAR) Center in Idaho Falls, ID. Flowsheet chemistry and operational parameters were defined through a collaborative effort involving Idaho National Engineering and Environmental Laboratory, Savannah River National Laboratory (SRNL), and THOR Treatment Technologies personnel. Personnel from Science Applications International Corporation, owners of the STAR Center, operated the pilot plant. The pilot scale test was terminated as planned after achieving a total of 100 hrs of cumulative/continuous processing operation. About 230 kg of SBW surrogate were processed that resulted in about 88 kg of solid product, a mass reduction of about 62%. The process achieved about a 90% turnover of the starting bed. Samples of mineralized solid product materials were analyzed for chemical/physical properties. Results of product performance testing conducted by SRNL will be reported separately by SRNL

Fluidized Bed Steam Reforming of Hanford LAW Using THORsm Mineralizing Technology

The U.S. Department of Energy (DOE) documented, in 2002, a plan for accelerating cleanup of the Hanford Site, located in southeastern Washington State, by at least 35 years. A key element of the plan was acceleration of the tank waste program and completion of ''tank waste treatment by 2028 by increasing the capacity of the planned Waste Treatment Plant (WTP) and using supplemental technologies for waste treatment and immobilization.'' The plan identified steam reforming technology as a candidate for supplemental treatment of as much as 70% of the low-activity waste (LAW). Mineralizing steam reforming technology, offered by THOR Treatment Technologies, LLC would produce a denitrated, granular mineral waste form using a high-temperature fluidized bed process. A pilot scale demonstration of the technology was completed in a 15-cm-diameter reactor vessel. The pilot scale facility was equipped with a highly efficient cyclone separator and heated sintered metal filters for particulate removal, a thermal oxidizer for reduced gas species and NOx destruction, and a packed activated carbon bed for residual volatile species capture. The pilot scale equipment is owned by the DOE, but located at the Science and Technology Applications Research (STAR) Center in Idaho Falls, ID. Pilot scale testing was performed August 2–5, 2004. Flowsheet chemistry and operational parameters were defined through a collaborative effort involving Idaho National Engineering and Environmental Laboratory, Savannah River National Laboratory (SRNL), and THOR Treatment Technologies personnel. Science Application International Corporation, owners of the STAR Center, personnel performed actual pilot scale operation. The pilot scale test achieved a total of 68.7 hrs of cumulative/continuous processing operation before termination in response to a bed de-fluidization condition. 178 kg of LAW surrogate were processed that resulted in 148 kg of solid product, a mass reduction of about 17%. The process achieved essentially complete bed turnover within approximately 40 hours. Samples of mineralized solid product materials were analyzed for chemical/physical properties. SRNL will report separately the results of product performance testing that were accomplished

Atmospheric phase correction using CARMA-PACS: high angular resolution observations of the FU Orionis star PP 13S*

We present 0".15 resolution observations of the 227 GHz continuum emission from the circumstellar disk around the FU Orionis star PP 13S*. The data were obtained with the Combined Array for Research in Millimeter-wave Astronomy (CARMA) Paired Antenna Calibration System (C-PACS), which measures and corrects the atmospheric delay fluctuations on the longest baselines of the array in order to improve the sensitivity and angular resolution of the observations. A description of the C-PACS technique and the data reduction procedures are presented. C-PACS was applied to CARMA observations of PP 13S*, which led to a factor of 1.6 increase in the observed peak flux of the source, a 36% reduction in the noise of the image, and a 52% decrease in the measured size of the source major axis. The calibrated complex visibilities were fitted with a theoretical disk model to constrain the disk surface density. The total disk mass from the best-fit model corresponds to 0.06 M_⊙, which is larger than the median mass of a disk around a classical T Tauri star. The disk is optically thick at a wavelength of 1.3 mm for orbital radii less than 48 AU. At larger radii, the inferred surface density of the PP 13S* disk is an order of magnitude lower than that needed to develop a gravitational instability

Modeling Contamination Migration on the Chandra X-ray Observatory II

During its first 14 years of operation, the cold (about 60degC) optical blocking filter of the Advanced CCD Imaging Spectrometer (ACIS), aboard the Chandra Xray Observatory, has accumulated a growing layer of molecular contamination that attenuates lowenergy x rays. Over the past few years, the accumulation rate, spatial distribution, and composition may have changed, perhaps partially related to changes in the operating temperature of the ACIS housing. This evolution of the accumulation of the molecular contamination has motivated further analysis of contamination migration on the Chandra Xray Observatory, particularly within and near the ACIS cavity. To this end, the current study employs a higherfidelity geometric model of the ACIS cavity, detailed thermal modeling based upon monitored temperature data, and an accordingly refined model of the molecular transport

Parents’ experiences of health visiting for children with Down syndrome

© MA Healthcare Limited.Children with Down syndrome have an increased likelihoodof experiencing serious health conditions. Health visitors canhave an important role in monitoring and promoting healthand development for young children with Down syndrome.This study aimed to explore parents’ experiences of healthvisiting services for children with Down syndrome. Twentyfour parents of children with Down syndrome aged 0–5 yearscompleted a brief questionnaire about the number and natureof visits from health visitors in the previous 12 months andtheir support needs. Some parents commented that otherprofessionals met the needs of their child, whereas others saidthat they would like more advice and support from healthvisitors. A further exploration of broader health serviceprovision, including health visiting, for young children withDown syndrome is needed.Peer reviewedFinal Accepted Versio

Modeling Contamination Migration on the Chandra X-ray Observatory - II

During its first 14 years of operation, the cold (about -60C) optical blocking filter of the Advanced CCD Imaging Spectrometer (ACIS), aboard the Chandra X-ray Observatory, has accumulated a growing layer of molecular contamination that attenuates low-energy x rays. Over the past few years, the accumulation rate, spatial distribution, and composition have changed. This evolution has motivated further analysis of contamination migration within and near the ACIS cavity. To this end, the current study employs a higher-fidelity geometric model of the ACIS cavity, detailed thermal modeling based upon temperature data, and a refined model of the molecular transport

Introduction to COFFE: The Next-Generation HPCMP CREATE-AV CFD Solver

HPCMP CREATE-AV Conservative Field Finite Element (COFFE) is a modular, extensible, robust numerical solver for the Navier-Stokes equations that invokes modularity and extensibility from its first principles. COFFE implores a flexible, class-based hierarchy that provides a modular approach consisting of discretization, physics, parallelization, and linear algebra components. These components are developed with modern software engineering principles to ensure ease of uptake from a user's or developer's perspective. The Streamwise Upwind/Petrov-Galerkin (SU/PG) method is utilized to discretize the compressible Reynolds-Averaged Navier-Stokes (RANS) equations tightly coupled with a variety of turbulence models. The mathematics and the philosophy of the methodology that makes up COFFE are presented

Measurement of the Resonant dμtd\mu t Molecular Formation Rate in Solid HD

Measurements of muon-catalyzed dt fusion ($d\mu t \to ^4He+n+\mu^-$) in solid HD have been performed. The theory describing the energy dependent resonant molecular formation rate for the reaction $\mu t$ + HD $\to [(d\mu t)pee]^*$ is compared to experimental results in a pure solid HD target. Constraints on the rates are inferred through the use of a Monte Carlo model developed specifically for the experiment. From the time-of- flight analysis of fusion events in 16 and 37 $\mu g\cdot cm^{-2}$ targets, an average formation rate consistent with 0.897$\pm$(0.046)$_{stat}\pm$ (0.166)$_{syst}$ times the theoretical prediction was obtained.Comment: 4 pages, 5 figure