Life-cycle costing of metallic structures

Structural material selection has traditionally been based on Initial material cost. However, growing pressure on the construction industry to consider the longer-term financial and environmental implications of projects is encouraging a more holistic view. Thus, materials with higher initial costs, but which offer cost savings over the life cycle of a structure, are gaining increasing recognition. The life-cycle costs of structures of two such metallic materials, namely aluminium alloy and stainless steel, are compared with those of ordinary structural carbon steel in the present study. Two structural applications - a typical office building and a bridge - are analysed, while offshore applications are briefly discussed. The ratio of initial material cost per tonne was assumed to be 1.0:2.5:4.0 (carbon steel:aluminium alloy:stainless steel). Following a preliminary structural design to current European design standards taking due account of the material densities and structural properties (principally strength and stiffness), it was found that on an initial cost basis, carbon steel offers the most competitive solution for both the building and the bridge. However, considering the additional life-cycle costs including maintenance costs, end-of-life costs and the residual value of the structure (appropriately discounted to present values), the results indicate that carbon steel offers the most competitive life-cycle solution for the office building but delivers the most expensive life-cycle solution for the bridge. Overall, it is concluded that on a whole-life basis aluminium alloy and stainless steel may offer more competitive solutions than carbon steel for bridges and exposed areas of building structures

Renal Artery Angioplasty

Efectuámos angioplastia transiuminal percutânea (ATP) da artéria renal em 59 doentes hipertensos e houve benefício inicial na tensão arterial em 91,5% e tardio em 79,6%. Obtivemos melhores resultados nas lesões unilaterais (81,4%) do que nas bilaterais (72,7%); nas lesões fora do ostium (82,5%) do que nas do ostium (7 1,4%); nas lesões de origem fibromuscular (88,9%) do que nas de origem aterosclerótica(75%); e nos doentes com idade igual ou inferior a 55 anos (84,8%) do que em doentes com idade superior (71,4%). Estas diferenças não foram contudo significativas. Os bons resultados da ATP da artéria renal na hipertensão renovascular levam-nos a considerar esta forma de intervenção como uma alternativa do seu tratamento

National Recommendations for Infant and Young Child Feeding in the World Health Organization European Region

OBJECTIVES: Complementary feeding should provide a healthy diet with critical nutrients for growth and development. Information is limited on child and infant feeding recommendations within the World Health Organization (WHO) European Region. METHODS: The WHO Regional Office for Europe and the European Society for Paediatric Gastroenterology, Hepatology and Nutrition (ESPGHAN) performed a survey of national recommendations on infant and young child nutrition aimed at national government departments of health and national paediatric experts. Questions addressed national recommendations on breast-feeding and complementary feeding. RESULTS: Information was available from 48 of the 53 Member States. Forty-five of 48 countries (94%) have national recommendations on infant and young child feeding, of which 41 are endorsed by official public health authorities. Regarding introduction of complementary feeding, 25 countries (out of 34, 74%) recommend 6 months of age as the ideal age. The earliest age of introduction recommended varies from 4 to 5 months in (31/38 countries, 82%) to 6 months (6/38, 16%) and 7 months (1/38, 2.6%). The recommended meal composition varies widely; introduction of iron-rich foods (meat, fish, eggs) at the age of 6 months is recommended in 30 out of 43 countries, whereas 13 (30%) recommend later introduction. CONCLUSIONS: National infant feeding recommendations vary widely between studied countries and partly differ from international recommendations. Too early introduction of complementary feeding can reduce duration of exclusive breast-feeding (EBF). Too late introduction of iron-rich complementary foods might increase anemia risk and adversely affect child development. A review and further harmonization of national recommendations appears desirable

Improved algorithm for neuronal ensemble inference by Monte Carlo method

Neuronal ensemble inference is one of the significant problems in the study of biological neural networks. Various methods have been proposed for ensemble inference from their activity data taken experimentally. Here we focus on Bayesian inference approach for ensembles with generative model, which was proposed in recent work. However, this method requires large computational cost, and the result sometimes gets stuck in bad local maximum solution of Bayesian inference. In this work, we give improved Bayesian inference algorithm for these problems. We modify ensemble generation rule in Markov chain Monte Carlo method, and introduce the idea of simulated annealing for hyperparameter control. We also compare the performance of ensemble inference between our algorithm and the original one.Comment: 14 pages, 3 figure

Mortality among over 6 million internal and international migrants in Brazil: a study using the 100 Million Brazilian Cohort

Background: To understand if migrants living in poverty in low and middle-income countries (LMICs) have mortality advantages over the non-migrant population, we investigated mortality risk patterns among internal and international migrants in Brazil over their life course. / Methods: We linked socio-economic and mortality data from 1st January 2011 to 31st December 2018 in the 100 Million Brazilian Cohort and calculated all-cause and cause-specific age-standardised mortality rates according to individuals' migration status for men and women. Using Cox regression models, we estimated the age- and sex-adjusted mortality hazard ratios (HR) for internal migrants (i.e., Brazilian-born individuals living in a different Brazilian state than their birth) compared to Brazilian-born non-migrants; and for international migrants (i.e., people born in another country) compared to Brazilian-born individuals. / Findings: The study followed up 45,051,476 individuals, of whom 6,057,814 were internal migrants, and 277,230 were international migrants. Internal migrants had similar all-cause mortality compared to Brazilian non-migrants (aHR = 0.99, 95% CI = 0.98–0.99), marginally higher mortality for ischaemic heart diseases (aHR = 1.04, 95% CI = 1.03–1.05) and higher for stroke (aHR = 1.11, 95% CI = 1.09–1.13). Compared to Brazilian-born individuals, international migrants had 18% lower all-cause mortality (aHR = 0.82, 95% CI = 0.80–0.84), with up to 50% lower mortality from interpersonal violence among men (aHR = 0.50, 95% CI = 0.40–0.64), but higher mortality from avoidable causes related to maternal health (aHR = 2.17, 95% CI = 1.17–4.05). / Interpretation: Although internal migrants had similar all-cause mortality, international migrants had lower all-cause mortality compared to non-migrants. Further investigations using intersectional approaches are warranted to understand the marked variations by migration status, age, and sex for specific causes of death, such as elevated maternal mortality and male lower interpersonal violence-related mortality among international migrants

Prevalência de Obstrução numa População Exposta ao Fumo do Tabaco - Projecto PNEUMOBIL

A espirometria não atingiu ainda a divulgação que se justificaria em patologia respiratória, ou indivíduos que se encontram em risco relativamente a esta patologia, cujo diagnóstico é insuficiente, havendo um escasso conhecimento, e consequente controlo, dos custos atribuíveis a estas doenças, com destaque para a doença pulmonar obstrutiva crónica (DPOC). O PNEUMOBIL, iniciativa que visa esta divulgação entre fumadores e ex -fumadores, foi reactivado, após 10 anos de aplicação em Portugal, revelando agora, numa amostra de 5324 indivíduos, em que cerca de 50% ainda mantêm os hábitos tabágicos, sejam do sexo masculino ou feminino, que houve uma elevada prevalência de obstrução detectada por espirometria (30% e 25%, respectivamente) nas pessoas rastreadas perto de centros de saúde (grupo público) e em empresas (grupo privado). Este risco não se explica em regra por exposição ocupacional, nem se relaciona com a maioria dos sintomas respiratórios, muito frequentes nos rastreados. Apenas a dispneia (OR=1,28; p=0,02) e os episódios frequentes de expectoração (OR=1,21; p=0,008) ou de bronquite aguda (OR=1,31; p=0,05) revelam alguma relação com a obstrução. O reconhecimento prévio da DPOC é muito reduzido e a presença de obstrução não se correlaciona (p=0,204) com o assumir da condição de portador

A database for curating the associations between killer cell immunoglobulin-like receptors and diseases in worldwide populations

The killer cell immunoglobulin-like receptors (KIR) play a fundamental role in the innate immune system, through their interactions with human leucocyte antigen (HLA) molecules, leading to the modulation of activity in natural killer (NK) cells, mainly related to killing pathogen-infected cells. KIR genes are hugely polymorphic both in the number of genes an individual carries and in the number of alleles identified. We have previously developed the Allele Frequency Net Database (AFND, http://www.allelefrequencies.net), which captures worldwide frequencies of alleles, genes and haplotypes for several immune genes, including KIR genes, in healthy populations, covering >4 million individuals. Here, we report the creation of a new database within AFND, named KIR and Diseases Database (KDDB), capturing a large quantity of data derived from publications in which KIR genes, alleles, genotypes and/or haplotypes have been associated with infectious diseases (e.g. hepatitis C, HIV, malaria), autoimmune disorders (e.g. type I diabetes, rheumatoid arthritis), cancer and pregnancy-related complications. KDDB has been created through an extensive manual curation effort, extracting data on more than a thousand KIR-disease records, comprising >50 000 individuals. KDDB thus provides a new community resource for understanding not only how KIR genes are associated with disease, but also, by working in tandem with the large data sets already present in AFND, where particular genes, genotypes or haplotypes are present in worldwide populations or different ethnic groups. We anticipate that KDDB will be an important resource for researchers working in immunogenetics. Database URL: http://www.allelefrequencies.net/diseases

Exceptionally large migration length of carbon and topographically-facilitated self-limiting molecular beam epitaxial growth of graphene on hexagonal boron nitride

This is the author accepted manuscript. The final version is available from the publisher via the DOI in this record.Available online 18 December 2016We demonstrate growth of single-layer graphene (SLG) on hexagonal boron nitride (h-BN) by molecular beam epitaxy (MBE), only limited in area by the finite size of the h-BN flakes. Using atomic force microscopy and micro-Raman spectroscopy, we show that for growth over a wide range of temperatures (500◦C – 1000◦C) the deposited carbon atoms spill off the edge of the h-BN flakes. We attribute this spillage to the very high mobility of the carbon atoms on the BN basal plane, consistent with van der Waals MBE. The h-BN flakes vary in size from 30 µm to 100 µm, thus demonstrating that the migration length of carbon atoms on h-BN is greater than 100 µm. When sufficient carbon is supplied to compensate for this loss, which is largely due to this fast migration of the carbon atoms to and off the edges of the h-BN flake, we find that the best growth temperature for MBE SLG on h-BN is ∼950◦C. Self-limiting graphene growth appears to be facilitated by topographic h-BN surface features: We have thereby grown MBE self-limited SLG on an h-BN ridge. This opens up future avenues for precisely tailored fabrication of nano- and hetero-structures on pre-patterned h-BN surfaces for device applications.This work is supported by ONR (N000140610138 and Graphene MURI), AFOSR (FA9550-11-1-0010), EFRC Center for Re-Defining Photovoltaic Efficiency through Molecule Scale Control (award DE-SC0001085), NSF (CHE-0641523), NYSTAR and Spanish Government (AIC-B-2011-0806, MAT2014-54231, MAT2015-67021-R). S.W. and A.P. were supported by the US Department of Energy Office of Science, Division of Materials Science and Engineering (award DE-SC0010695)