Synthese und Charakterisierung von Typ-II Halbleiternanoheterostrukturen

Im Rahmen dieser Arbeit wurden schalenartig aufgebaute Nanoheterostrukturen aus CdTe, CdS und CdSe hergestellt und insbesondere im Hinblick auf ihre optischen Eigenschaften untersucht. Eine neue Variante der CdTe Nanokristallsynthese in ODE als hochsiedendem, nicht koordinierendem Lösungsmittel wurde entwickelt. Diese weist deutliche Vorteile im Bezug auf Reproduzierbarkeit und Wachstumskinetik gegenüber der älteren Synthese in TOP/TOPO auf, da durch ein deutlich verlangsamtes Wachstum die gezielte Synthese von Nanokristallen definierter Größe deutlich erleichtert wird. Diese CdTe Nanokristalle wurden sowohl mit CdS als auch mit CdSe beschichtet. Dabei wurden für beide Arten der Beschichtung verschiedene Methoden getestet und es konnte jeweils eine Synthesemethode gefunden werden, welche Kern-Schale Nanokristalle mit geringer Polydispersität und guten optischen Eigenschaften (schmale Emissionssignale und hohe Quantenausbeuten) liefert. Weiterhin wurden Kern-Schale-Schale Nanokristalle aus CdTe/CdS/CdSe synthetisiert. Dieses System besitzt besonders interessante Eigenschaften, die sich vor allem in Form einer über die eingebettete CdS Schicht einstellbare Ladungsträgertrennung im angeregten Zustand der Nanokristalle und der damit einhergehenden verlängerten Emissionslebensdauer zeigen. Die optischen Eigenschaften (erster elektronischer Übergang) der hergestellten Kern-Schale und Kern-Schale-Schale Teilchen wurden mit theoretischen Berechnungen im Rahmen der „Effektive-Masse-Näherung“ verglichen. Dieser Vergleich ergab für die mit CdSe beschichteten Teilchen eine gute, für die mit CdS beschichteten Teilchen allerdings nur eine mäßige Übereinstimmung. Auch die transmissionselektronenmikroskopischen Aufnahmen legen nahe, dass insbesondere die Beschichtung mit CdS nicht quantitativ im Bezug auf die eingesetzte Precursormenge abläuft. Die Emissionslebensdauern der verschiedenen Systeme zeigen nichts desto trotz, dass die theoretisch zu erwartende Ladungsträgertrennung im angeregten Zustand der CdTe/CdS/CdSe Kern-Schale-Schale Nanokristalle tatsächlich eintritt. Durch Einführen der CdS Schicht konnte eine Verlängerung der Emissionslebensdauer der Nanokristalle erreicht werden. Insbesondere wurde gezeigt, dass es möglich ist, verschiedene Nanoheterostrukturen herzustellen, deren Emissionslebensdauern unterschiedlich sind, obwohl sie bei derselben Wellenlänge Licht emittieren. Diese Eigenschaft kann mit Nanokristallen aus nur einem Material nicht erreicht werden. Durch die richtige Kombination von Halbleitermaterialien ist es also möglich, neben der bereits lange bekannten Möglichkeit der Einstellbarkeit der Emissionswellenlänge von Nanokristallen nun auch die Emissionslebensdauer der Nanokristalle zu beeinflussen

Tuning the LSPR in copper chalcogenide nanoparticles by cation intercalation, cation exchange and metal growth

Localized surface plasmon resonances (LSPRs) of degenerately doped copper chalcogenide nanoparticles (NPs) (Cu2−xSe berzelianite and Cu1.1S covellite) have been modified applying different methods. The comparison of the cation exchange (Cu2−xSe) and intercalation (Cu1.1S) of Ag(I) and Cu(I) has shown that Ag(I) causes a non reversible, air stable shift of the LSPR. This was compared to the influence of Au(I) cation exchange into Cu1.1S platelets under the formation of Cu1.1S–Au2S mixed nanoplatelets. Furthermore, we show the growth of Au domains on Cu2−xSe, and discuss the interaction of the two plasmonic parts of the obtained dual plasmonic Cu2−xSe–Au hybrid particles.DFG/ DO1580/2-1DFG/DO1580/3-1Volkswagen foundation/ZN291

Nanoparticle-Based Cryogels from Colloidal Aqueous Dispersion: Synthesis, Properties and Applications

Cryogels have morphological features that make them interesting for several applications such as catalysis, sensing or tissue engineering. Their interconnected network and open porous structure, build up by primary particles (such as inorganic nanocrystals or polymers), provide these materials with unique physical properties and high specific surface areas. While the library of cryogels is endless, widely used in the polymer chemistry field, in this review we will summarize the structure and properties, applications and challenges of inorganic nanocrystal-based cryogels obtained by freezing and freeze-drying an aqueous nanoparticle colloid. This fast, easy and versatile gelation method will be outlined, along with the corresponding macro-, micro- and nano-structures and gel morphologies that can be obtained, for example, by changing the freezing temperature or by using one nanoparticle system or nanoparticle mixtures. Their applications towards electrocatalysis, photocatalysis and photoelectrochemical sensing will be highlighted, as well as the challenges and prospects of these materials

Probing Bidirectional Plasmon-Plasmon Coupling-Induced Hot Charge Carriers in Dual Plasmonic Au/CuS Nanocrystals

Heterostructured Au/CuS nanocrystals (NCs) exhibit localized surface plasmon resonance (LSPR) centered at two different wavelengths (551 and 1051 nm) with a slight broadening compared to respective homostructured Au and CuS NC spectra. By applying ultrafast transient absorption spectroscopy we show that a resonant excitation at the respective LSPR maxima of the heterostructured Au/CuS NCs leads to the characteristic hot charge carrier relaxation associated with both LSPRs in both cases. A comparison of the dual plasmonic heterostructure with a colloidal mixture of homostructured Au and CuS NCs shows that the coupled dual plasmonic interaction is only active in the heterostructured Au/CuS NCs. By investigating the charge carrier dynamics of the process, we find that the observed interaction is faster than phononic or thermal processes (< 100 fs). The relaxation of the generated hot charge carriers is faster for heterostructured nanocrystals and indicates that the interaction occurs as an energy transfer (we propose Landau damping or interaction via LSPR beat oscillations as possible mechanisms) or charge carrier transfer between both materials. Our results strengthen the understanding of multiplasmonic interactions in heterostructured Au/CuS NCs and will significantly advance applications where these interactions are essential, such as catalytic reactions

Composition-Controlled Laser-Induced Alloying of Colloidal Au–Cu Hetero Nanoparticles

Due to their optical properties (localized surface plasmon resonance, LSPR), colloidally dispersed metal nanoparticles are well suited for selective heating by high-energy laser radiation above their melting point without being limited by the boiling point of the solvent, which represents an excellent complement to wet-chemical nanoparticle synthesis. By combining wet-chemical synthesis and postsynthesis laser treatment, the advantages of both methods can be used to specifically control the properties of nanoparticles. Especially in the colloidal synthesis of nanoalloys consisting of two or more metals with different redox potentials, wet-chemical synthesis quickly reaches its limits in terms of composition control and homogeneity. For this reason, the direct synthesis path is divided into two parts to take the strengths of both methods. After preparing Au–Cu hetero nanoparticles by wet-chemical synthesis, nanoalloys with previous adjusted composition can be formed by postsynthesis laser treatment. The formation of these nanoalloys can be followed by different characterization methods, such as transmission electron microscopy (TEM), where the fusion of both metal domains and the formation of spherical and homogeneous Au–Cu nanoparticles can be observed. Moreover, the alloy formation can be followed by different shifts of X-ray diffraction (XRD) reflections and LSPR maxima depending on the composition

Cryogels from Pt/γ-Fe2O3 and Pd/γ-Fe2O3 NPs as Promising Electrocatalysts for Ethanol Oxidation Reaction

Cryogels from noble metal NPs have proven to be highly efficient catalysts due to their high specific surface area which increases the mass transfer channels and catalytic active sites. By using metal oxides as co-catalysts, the costs of the material can be significantly reduced, while the catalytic activity can remain the same or even improve due to synergetic effects. In this work, we synthesize different cryogel thin films supported on modified ITO substrates from Pt, Pd nanoparticles (NPs), and mixtures of these noble metals with γ-Fe2O3 NPs in a very low concentration (1 wt% of the noble metal). Structural and elemental analysis of the samples are performed, along with the measurement and analysis of their catalytic activity. The electrocatalytic activity of the cryogels towards ethanol oxidation reaction (EOR) in alkaline media was evaluated by means of cyclic voltammetry. By mixing γ-Fe2O3 NPs with Pt or Pd NPs in the cryogel structure, we observe increased tolerance against poisonous surface intermediates produced during the EOR. Moreover, we observe an increase in the catalytic activity towards EOR in the case of the 1 wt% Pd/γ-Fe2O3 cryogel, making them promising materials for the development of direct ethanol fuel cells

Revealing the Correlation of the Electrochemical Properties and the Hydration of Inkjet-Printed CdSe/CdS Semiconductor Gels

The mobility of charge carriers across a semiconductor nanoparticle based 3D network (i.e. a gel) and the interfacial transfer of the charge carriers across the nanoparticle network/electrolyte boundary are elementary processes for applications in the fields of sensing and energy harvesting. The automated manufacturing of electrodes coated with porous networks can already be realized by inkjet printing. By simultaneous printing of CdSe/CdS dot-in-rod shaped nanorods (NRs) and the destabilization reagent, CdSe/CdS gel network coated electrodes can be obtained. In the presented work, the charge carrier mobility of the electrons and the holes within the porous CdSe/CdS nanorod gel network are investigated via photoelectrochemistry. Under application of linear sweep voltammograms (LSVs) and intensity modulated photocurrent spectra (IMPS) it is shown, that the electron is moving within the tip-to-tip connected CdSe/CdS NR gel structure, while the holes are trapped in the CdSe seed of the semiconductor heterostructures. Furthermore, the preparation process of gel structures is related to the elementary mechanism of hydration, which can be shown via photoelectrochemical long term studies

Structural Diversity in Cryoaerogel Synthesis

Different techniques that enable the selective microstructure design of aerogels without the use of additives are presented. For this, aerogels were prepared from platinum nanoparticle solutions using the cryoaerogelation method, and respective impacts of different freezing times, freezing media, and freezing temperatures were investigated with electron microscopy as well as inductively coupled plasma optical emission spectroscopy. The use of lower freezing temperatures, freezing media with higher heat conductivities, and longer freezing periods led to extremely different network structures with enhanced stability. In detail, materials were created in the shape of lamellar, cellular, and dendritic networks. So far, without changing the building blocks, it was not possible to create the selective morphologies of resulting aerogels in cryoaerogelation. Now, these additive-free approaches enable targeted structuring and will open up new opportunities in the future cryoaerogel design

Temperature-Sensitive Localized Surface Plasmon Resonance of α-NiS Nanoparticles

The presented work shows a synthesis route to obtain nanoparticles of the hexagonal α-NiS phase and core-shell particles where the same material is grown onto previously prepared Au seeds. In the bulk, this nickel sulfide phase is known to exhibit a metal-insulator type phase transition (MIT) at 265 K which drastically alters its electrical conductivity. Since the produced nanoparticles show a localized surface plasmon resonance (LSPR) in the visible range of the electromagnetic spectrum, the development of their optical properties depending on the temperature is investigated. This is the first time an LSPR of colloidal nanoparticles is monitored regarding such a transition. The results of UV-vis absorbance measurements show that the LSPR of the particles can be strongly and reversibly tuned by varying the temperature. It can be switched off by cooling the nanoparticles and switched on again by reheating them above the transition temperature. Additional to the phase transition, the temperature-dependent magnetic susceptibility of α-NiS and Au-NiS nanoparticles suggests the presence of different amounts of uncompensated magnetic moments in these compounds that possibly affect the optical properties and may cause the observed quantitative differences in the LSPR response of these materials

Temperature and Composition Dependent Optical Properties of CdSe/CdS Dot/Rod-Based Aerogel Networks

Employing nanocrystals (NCs) as building blocks of porous aerogel network structures allows the conversion of NC materials into macroscopic solid structures while conserving their unique nanoscopic properties. Understanding the interplay of the network formation and its influence on these properties like size-dependent emission is a key to apply techniques for the fabrication of novel nanocrystal aerogels. In this work, CdSe/CdS dot/rod NCs possessing two different CdSe core sizes were synthesized and converted into porous aerogel network structures. Temperature-dependent steady-state and time-resolved photoluminescence measurements were performed to expand the understanding of the optical and electronic properties of these network structures generated from these two different building blocks and correlate their optical with the structural properties. These investigations reveal the influence of network formation and aerogel production on the network-forming nanocrystals. Based on the two investigated NC building blocks and their aerogel networks, mixed network structures with various ratios of the two building blocks were produced and likewise optically characterized. Since the different building blocks show diverse optical response, this technique presents a straightforward way to color-tune the resulting networks simply by choosing the building block ratio in connection with their quantum yield