Potential of Lignins as Antioxidant Additive in Active Biodegradable Packaging Materials

Lien vers la version éditeur: http://link.springer.com/article/10.1007/s10924-013-0570-6Due to their polyphenolic structure lignins bear a number of interesting functional properties, such as antioxidant activity. Natural antioxidants are very much looked for in the aim of protection of light or oxygen sensitive goods and are being used in active packaging. Poly(lactide) (PLA)-lignin films were prepared by twin screw extrusion followed by thermo-compression using two different commercial sources of alkali lignins obtained from gramineous plants. A good dispersion of lignin in the matrix was observed. Mechanical properties of the compounded material were merely diminished and oxygen barrier properties slightly enhanced. The chromatographic study of the lignins revealed that the low molecular weight fraction of both lignins increased during the polymer processing. The migration of low molecular weight compounds in an ethanol/water solution simulating fatty foodstuff was performed and the antioxidant activity of the extract was analysed. It was found that the activity increases with increasing severity of the heat treatment because of the generation of free phenolic monomers during processing. These results open an interesting way for application of lignins as an active compound in packaging materials. Lignins do not impair the mechanical and barrier performance of the polymer and the plastics processing even allows for the generation of active substances

Crystallization behavior of poly(lactide)/poly(β-hydroxybutyrate)/talc composites.

The authors thank Dr. Patrice Lefrançois (CNAM) for SEM observations. They are also grateful to Pr. Jack R. Plimmer USDA, Agricultural Research Service, USA for his discussions during this work.The morphology and miscibility of commercial poly(lactide) (PLA)/poly(b-hydroxybutyrate) (PHB, from 5 to 20 wt %) blends prepared by melt extrusion method, were investigated using differential scanning calorimetry (DSC) and Fourier transform infra-red spectroscopy (FTIR) observations. The results show that for all the studied blend contents, PLA/PHB blends are immiscible. The effects of PHB and talc on the nonisothermal cold crystallization kinetics of PLA were examined using a differential scanning calorimetry (DSC) at different heating rates. PHB acted as a nucleating agent on PLA and the addition of talc to the blend yielded further improve-ment, since significant increase in the enthalpy peak was observed for samples containing 10 wt % PHB and talc (from 0.5 to 5 phr). The crystallization kinetics were then examined using the Avrami–Jeziorny and Liu–Mo approach. The simultaneous presence of PHB and talc induced a decrease of the crystallization half time. The evolution of activation energies determined with Kissinger’s equation suggests that blending with PHB and incorporating talc promote nonisothermal cold crystallization of PLA. The synergistic nucleating effect of PHB and talc was also observed on isothermal crystallization of PLA from the melt

Impact of crystallinity of poly(lactide) on helium and oxygen barrier properties

The helium and oxygen gas barrier properties of poly(lactide) were investigated as a function of stereochemistry and crystallinity degree. Poly(l-lactide) and poly(d,l-lactide) films were obtained by extrusion and thermally cold crystallized in either α′- or α-crystalline form with increasing crystallinity degree. Annealing of the films at low temperatures yielded to α′-crystals as well as the creation of a rigid amorphous fraction in the amorphous phase. Unexpectedly, the quantity of the rigid amorphous fraction was highest in poly(l-lactide) crystallized under α′-form. Unexpectedly, the gas permeability increased with increasing quantity of α′-crystals in poly(l-lactide) and remained constant with increasing quantity of α′-crystals in poly(d,l-lactide). A gain in gas barrier properties was obtained upon crystallization at higher temperatures yielding α-crystals. The analysis of the oxygen transport parameters, in particular the diffusion and the solubility coefficient showed that the diffusion was accelerated upon crystallization, while the solubility coefficient decreased in an expected manner which led to conclude that it remained constant in the amorphous phase. The acceleration of the diffusion seems to be correlated to the occurrence of the rigid amorphous fraction, which holds larger free volume. To conclude, for optimization of poly(lactide) gas barrier properties by focussing on the decrease of the diffusion coefficient it can be suggested to work with poly(d,l-lactide) and to aim a crystallization in α-form avoiding the formation of a rigid amorphous fraction

Impact of crystallinity of poly(lactide) on helium and oxygen barrier properties

The helium and oxygen gas barrier properties of poly(lactide) were investigated as a function of stereochemistry and crystallinity degree. Poly(l-lactide) and poly(d,l-lactide) films were obtained by extrusion and thermally cold crystallized in either α′- or α-crystalline form with increasing crystallinity degree. Annealing of the films at low temperatures yielded to α′-crystals as well as the creation of a rigid amorphous fraction in the amorphous phase. Unexpectedly, the quantity of the rigid amorphous fraction was highest in poly(l-lactide) crystallized under α′-form. Unexpectedly, the gas permeability increased with increasing quantity of α′-crystals in poly(l-lactide) and remained constant with increasing quantity of α′-crystals in poly(d,l-lactide). A gain in gas barrier properties was obtained upon crystallization at higher temperatures yielding α-crystals. The analysis of the oxygen transport parameters, in particular the diffusion and the solubility coefficient showed that the diffusion was accelerated upon crystallization, while the solubility coefficient decreased in an expected manner which led to conclude that it remained constant in the amorphous phase. The acceleration of the diffusion seems to be correlated to the occurrence of the rigid amorphous fraction, which holds larger free volume. To conclude, for optimization of poly(lactide) gas barrier properties by focussing on the decrease of the diffusion coefficient it can be suggested to work with poly(d,l-lactide) and to aim a crystallization in α-form avoiding the formation of a rigid amorphous fraction

The mediating effect of operational capabilities on operational performance

Purpose – Collaboration and operational capabilities are two strengths for managing supply chains to achieveoperational performance. In this context, this study aims to analyze the mediating effect of operationalcapabilities on the relationship between collaborative supply chain management and operational performance.Design/methodology/approach – The study design consisted of a theoretical framework to estimate themediation paths by latent variable structural modeling methods. A survey of 138 respondents from Braziliancapital goods companies was conducted.Findings – The study revealed that operational capabilities partially mediate the relationship betweencollaborative supply chain management and operational performance. The findings provide importantguidance for managers to strengthen the relationship with suppliers to continuously improve operationalcapability.Research limitations/implications – As the sample size was made up of 138 respondents, it wasimpossible to revalidate the theoretical–empirical model. New data need to be collected to re-evaluate thestructural model and expand them to other economic segments.Practical implications – By examining the theoretical insights and empirical findings, the study expandedknowledge about collaborative management and the understanding of the importance of operationalcapabilities in the relationship between collaborative management and operational performance formanagement practices.Originality/value – The study developed a theoretical–empirical measurement model, reliable andstatistically validated, to test the mediating effect of operational capabilities in the relationship betweencollaborative management and operational performance

Effect of crystallization on barrier properties of formulated polylactide

Polylactide (PLA), a biodegradable polymer obtained from biomass, was formulated with a nucleating agent, talc, and a plasticizer, acetyl tributyl citrate, and cold crystallized in α and α′ form. The barrier properties of crystallized PLA were investigated as a function of the formulation and the crystalline form, thanks to three molecules with increasing polymer interactions, i.e. helium, oxygen and ethyl acetate (EA). Contrary to expectation, the oxygen diffusion coefficient in neat and formulated PLA did not decrease with crystallization. Even an increase of the diffusion coefficient was noticed for the most interacting probe, EA, in formulated PLA. Conditioning of neat and formulated PLA in an atmosphere containing EA vapour caused a modification of the material structure by plasticization and induced crystallization even at small EA activities. The plasticizing effect caused the glass transition temperature Tg to shift to below ambient temperature. In the case of neat PLA induced crystallization in solely the α form was obtained, and in the case of formulated PLA a blend of α and α′ forms was observed. Copyright © 2011 Society of Chemical Industr

Effect of crystallization on barrier properties of formulated polylactide

Polylactide (PLA), a biodegradable polymer obtained from biomass, was formulated with a nucleating agent, talc, and a plasticizer, acetyl tributyl citrate, and cold crystallized in α and α′ form. The barrier properties of crystallized PLA were investigated as a function of the formulation and the crystalline form, thanks to three molecules with increasing polymer interactions, i.e. helium, oxygen and ethyl acetate (EA). Contrary to expectation, the oxygen diffusion coefficient in neat and formulated PLA did not decrease with crystallization. Even an increase of the diffusion coefficient was noticed for the most interacting probe, EA, in formulated PLA. Conditioning of neat and formulated PLA in an atmosphere containing EA vapour caused a modification of the material structure by plasticization and induced crystallization even at small EA activities. The plasticizing effect caused the glass transition temperature Tg to shift to below ambient temperature. In the case of neat PLA induced crystallization in solely the α form was obtained, and in the case of formulated PLA a blend of α and α′ forms was observed. Copyright © 2011 Society of Chemical Industr

Colaboração Através das Alianças e seu Impacto no Desempenho Operacional

O estudo buscou entender a colaboração na cadeia de suprimentos através das alianças de longo prazo e seu impacto no desempenho da empresa compradora. A pesquisa foi dividida em duas fases. Na primeira, de natureza descritiva, desenvolveu-se um questionário estruturado, fundamentado em autores da cadeia de suprimentos e alianças de longo prazo. A segunda fase objetivou aprofundar as percepções sobre colaboração, comparando com os resultados da primeira fase. Foram realizadas entrevistas em profundidade com gerentes de compras responsáveis pela aquisição de materiais e serviços. Os resultados evidenciaram que a redução de custo, o atendimento ao prazo de entrega e a capacidade de resposta são fatores relevantes para o desempenho. O estudo mostrou a importância da colaboração por meio das alianças de longo prazo e seus resultados em empresas instaladas no Brasil. 

Solubility factors as screening tools of biodegradable toughening agents of polylactide

Changes in the thermomechanical properties of polylactide (PLA) plasticized by two biodegradable and biobased molecules, Polysorb ID37 (PID37) and squalene, were compared to formulations with petroleum-based plasticizers, namely, acetyl tributyl citrate, poly(ethylene glycol) 400, and dioctyl adipate (DOA). The solubility parameters of the additives were calculated and were related to the plasticization behaviors. PID37 proved to be miscible with PLA because of its polar functions and short alkyl groups. It decreased the PLA glass-transition temperature (Tg) and increased in ductility when Tg approached room temperature. Squalene had a low miscibility because of the absence of polar groups. Tg was not depressed. Ductility improvements were nevertheless reached because the immiscible inclusions efficiently induced crazing by the distribution of stress concentration points all over the material; this delayed failure. The maximum elongations at break were 60% for squalene, 400% for DOA, and 500% for PID37. The solubility factors were, thus, an efficient prediction tool for the plasticizing behavio

Analysis of the Structure-Properties Relationships of Different Multiphase Systems Based on Plasticized Poly(Lactic Acid)

Poly(lactic acid) is one of the most promising biobased and biodegradable polymers for food packaging, an application which requires good mechanical and barrier properties. In order to improve the mechanical properties, in particular the flexibility, PLA plasticization is required. However, plasticization induces generally a decrease in the barrier properties. Acetyl tributyl citrate (ATBC) and poly(ethylene glycol) 300 (PEG), highly recommended as plasticizers for PLA, were added up to 17 wt% in P(D,L)LA. In the case of PEG, a phase separation was observed for plasticizer contents higher than 5 wt%. Contrary to PEG, the Tg decrease due to ATBC addition, modelled with Fox’s law, and the absence of phase separation, up to 17 wt% of plasticizer, confirm the miscibility of PLA and ATBC. Contents equal or higher than 13 wt% of ATBC yielded a substantial improvement of the elongation at break, becoming higher than 300%. The effect of PLA plasticization on the barrier properties was assessed by different molecules, with increasing interaction with the formulated material, such as helium, an inert gas, and oxygen and water vapour. In comparison to the neat sample, barrier properties against helium were maintained when PLA was plasticized with up to 17 wt% of ATBC. The oxygen permeability coefficient and the water vapour transmission rate doubled for mixtures with 17 wt% ATBC in PLA, but increased five-fold in the PEG plasticized samples. This result is most likely caused by increased solubility of oxygen and water in the PEG phase due to their mutual miscibility. To conclude, ATBC increases efficiently the elongation at break of PLA while maintaining the permeability coefficient of helium and keeping the barrier properties against oxygen and water vapour in the same order of magnitude