Characteristics of CuCrTiAl alloy after plastic deformation

The development of the automotive industry leads to the search for newer construction materials, but also those used in the production process. Although many types of joints are used in vehicles, resistance welds remain the dominant one. The commonly used alloy for welding caps (CuCrZr) is already well known and therefore newer alloys and technologies for their production are sought to increase service life, and thus reduce production costs. Precipitation hardening CuCrTiAl alloy was analysed in this article. After casting, CuCrTiAl alloy was subjected to cold and hot deformation and then tested for its usability. The obtained results confirmed the potential of this alloy to make electrodes for resistance welding

Characteristics of CuCrTiAl alloy after plastic deformation

The development of the automotive industry leads to the search for newer construction materials, but also those used in the production process. Although many types of joints are used in vehicles, resistance welds remain the dominant one. The commonly used alloy for welding caps (CuCrZr) is already well known and therefore newer alloys and technologies for their production are sought to increase service life, and thus reduce production costs. Precipitation hardening CuCrTiAl alloy was analysed in this article. After casting, CuCrTiAl alloy was subjected to cold and hot deformation and then tested for its usability. The obtained results confirmed the potential of this alloy to make electrodes for resistance welding

Influence of the speed of downward semi-continuous casting on the crystal size and mechanical properties of recycled copper

In this study, the influence of the speed of downward semi-continuous casting on the crystal size and mechanical properties of recycled copper after casting and cold deformation was investigated. It was shown that the increase in the casting speed from 0,09 m / min to 0,22 m / min resulted in refinement of the macrostructure and reduction of the crystal cross-sectional area from 3,221 mm2 to 1,2 mm2, which resulted in an increase in microhardness after casting by 8 %, while in the state after cold working, an increase in microhardness by 3 % and ultimate tensile strength by 2,5 %

Influence of the speed of downward semi-continuous casting on the crystal size and mechanical properties of recycled copper

In this study, the influence of the speed of downward semi-continuous casting on the crystal size and mechanical properties of recycled copper after casting and cold deformation was investigated. It was shown that the increase in the casting speed from 0,09 m / min to 0,22 m / min resulted in refinement of the macrostructure and reduction of the crystal cross-sectional area from 3,221 mm2 to 1,2 mm2, which resulted in an increase in microhardness after casting by 8 %, while in the state after cold working, an increase in microhardness by 3 % and ultimate tensile strength by 2,5 %

Ferromagnetism and Electronic Structure of (Ga,Mn)As:Bi and (Ga,Mn)As Epitaxial Layers

The photoreflectance (PR) spectroscopy was applied to study the band-structure in GaAs:Bi, (Ga,Mn)As and (Ga,Mn)As:Bi layers with the 4% of Mn and 1 % of Bi content and, as a reference, undoped GaAs layer. All films were grown by low temperature (LT) MBE on semi-insulating (001) GaAs substrates. Photoreflec-tance studies were supported by Raman spectroscopy and high resolution X-ray diffractometry (XRD) measurements. Magnetic properties of the films were characterized with a superconducting quantum in-terference device (SQUID) magnetometer. Our findings were interpreted in terms of the model, which as-sumes that the mobile holes residing in the valence band of GaAs and the Fermi level position determined by the concentration of valence-band holes. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/3533

The kernel and the injectivity of the EPRL map

In this paper we prove injectivity of the EPRL map for |\gamma|<1, filling the gap of our previous paper.Comment: 17 pages, 3 figure