Output Stabilizability

In this report, we provide algebraic tests to determine whether a linear Single-Input-Single-Output (SISO) system, is stabilizable with a constant output feedback

Correction: A low cost azomethine-based hole transporting material for perovskite photovoltaics

No abstract available

Post transition metal substituted Keggin POMs as thin film chemiresistive sensors for H2O and CO2 detection

Chemiresitive sensing allows the affordable and facile detection of small molecules such as H2O and CO2. Herein, we report a novel class of earth abundant post transition metal substituted Keggin polyoxometalates (POMs) for chemiresistive sensing applications, with conductivies up to 0.01 S cm-1 under 100% CO2 and 65% Relative Humidity (RH)

Few-mode metal-free perovskite optical fiber with second-order optical nonlinearity

Semiconductor core optical fibers are highly desirable for fiber-based photonic and optoelectronic applications as they can combine strong optical nonlinearities, tight light confinement, wide transmission bands, and electronic functionality within a single platform. Perovskites have emerged as particularly exciting materials for semiconductor photonics as they have strong optical nonlinearities and tunable optoelectronic bandgaps. However, lead-based perovskites contain toxic elements and are, therefore, not environmentally friendly. Furthermore, in fiber form, their core-size is prohibitively large, making them unsuitable for nonlinear optics and applications that require single-mode guidance, such as telecommunications. Here, we report a metal-free perovskite core optical fiber where lead has been substituted for an ammonium cation in the perovskite structure. The core material has a wide bandgap greater than 5 eV, a high laser damage threshold, and a core diameter that can be produced as small as 5 \ub5m. At this core size, the fiber supports just six modes, and the fundamental mode can readily be excited and isolated. Moreover, the metal-free perovskite has a second-order susceptibility that is absent in the archetypal lead-based perovskites and many other semiconductor core materials, such as silicon and germanium. The second-order susceptibility is important for many nonlinear optics applications, such as second-harmonic generation and quantum optics

Untangling free carrier and exciton dynamics in layered hybrid perovskites using ultrafast optical and terahertz spectroscopy

\ua9 2024 The Author(s). Published by IOP Publishing Ltd.Layered hybrid perovskites (LPKs) are promising as alternatives or additives to 3D metal halide perovskites for optoelectronic applications including photovoltaic cells, LEDs and lasers due to their increased stability. However, high exciton binding energies in these materials mean that excitons are the majority species under the operating conditions of many devices. Although the efficiency of devices that incorporate LPKs has been increasing, much is still unknown about the interplay of excitons and free charge-carriers in these materials, which is vital information for understanding how optoelectronic properties dictate device efficiency. In this work, we employ optical pump/THz probe spectroscopy (OPTP) and visible transient absorption spectroscopy (TAS) to analyse the optoelectronic properties and charge-carrier dynamics of phenylethylammonium lead iodide (PEA)2PbI4. By combining these techniques, we are able to disentangle the contributions from excitons and free charge-carriers. We observe fast cooling of free charge-carriers and exciton formation on a timescale of ∼400 fs followed by slower bimolecular recombination of residual free charge-carriers with a rate constant k 2 ∼ 109 cm3s−1. Excitons recombine via two monomolecular processes with lifetimes t 1 ∼ 11 ps and t2 ∼ 83 ps. Furthermore, we detect signatures of exciton-phonon coupling in the transient absorption kinetic traces. These findings provide new insight into the interplay between free charge-carriers and excitons as well as a possible mechanism to further understand the charge-carrier dynamics in LPKs

The balancing act between high electronic and low ionic transport influenced by perovskite grain boundaries

\ua9 2024 The Royal Society of Chemistry.A better understanding of the materials\u27 fundamental physical processes is necessary to push hybrid perovskite photovoltaic devices towards their theoretical limits. The role of the perovskite grain boundaries is essential to optimise the system thoroughly. The influence of the perovskite grain size and crystal orientation on physical properties and their resulting photovoltaic performance is examined. We develop a novel, straightforward synthesis approach that yields crystals of a similar size but allows the tuning of their orientation to either the (200) or (002) facet alignment parallel to the substrate by manipulating dimethyl sulfoxide (DMSO) and tetrahydrothiophene-1-oxide (THTO) ratios. This decouples crystal orientation from grain size, allowing the study of charge carrier mobility, found to be improved with larger grain sizes, highlighting the importance of minimising crystal disorder to achieve efficient devices. However, devices incorporating crystals with the (200) facet exhibit an s-shape in the current density-voltage curve when standard scan rates are used, which typically signals an energetic interfacial barrier. Using the drift-diffusion simulations, we attribute this to slower-moving ions (mobility of 0.37 7 10-10 cm2 V-1 s-1) in combination with a lower density of mobile ions. This counterintuitive result highlights that reducing ion migration does not necessarily minimise hysteresis

A closer look into two-step perovskite conversion with X-ray scattering

Recently, hybrid perovskites have gathered much interest as alternative materials for the fabrication of highly efficient and cost-competitive solar cells; however, many questions regarding perovskite crystal formation and deposition methods remain. Here we have applied a two-step protocol where a crystalline PbI2 precursor film is converted to MAPbI3–xClx perovskite upon immersion in a mixed solution of methylammonium iodide and methylammonium chloride. We have investigated both films with grazing incidence small-angle X-ray scattering to probe the inner film morphology. Our results demonstrate a strong link between lateral crystal sizes in the films before and after conversion, which we attribute to laterally confined crystal growth. Additionally, we observe an accumulation of smaller grains within the bulk in contrast with the surface. Thus, our results help to elucidate the crystallization process of perovskite films deposited via a two-step technique that is crucial for controlled film formation, improved reproducibility, and high photovoltaic performance

Reversible hydration of CH(3)NH(3)Pbl(3) in films, single crystals, and solar cells

Solar cells composed of methylammonium lead iodide perovskite (MAPI) are notorious for their sensitivity to moisture. We show that (i) hydrated crystal phases are formed when MAPI is exposed to water vapor at room temperature and (ii) these phase changes are fully reversed when the material is subsequently dried. The reversible formation of CH3NH3PbI3·H2O followed by (CH3NH3)4PbI6·2H2O (upon long exposure times) was observed using time-resolved XRD and ellipsometry of thin films prepared using “solvent engineering”, single crystals, and state-of-the-art solar cells. In contrast to water vapor, the presence of liquid water results in the irreversible decomposition of MAPI to form PbI2. MAPI changes from dark brown to transparent on hydration; the precise optical constants of CH3NH3PbI3·H2O formed on single crystals were determined, with a bandgap at 3.1 eV. Using the single-crystal optical constants and thin-film ellipsometry measurements, the time-dependent changes to MAPI films exposed to moisture were modeled. The results suggest that the monohydrate phase forms independent of the depth in the film, suggesting rapid transport of water molecules along grain boundaries. Vapor-phase hydration of an unencapsulated solar cell (initially Jsc ≈ 19 mA cm–2 and Voc ≈ 1.05 V at 1 sun) resulted in more than a 90% drop in short-circuit photocurrent and ∼200 mV loss in open-circuit potential; however, these losses were fully reversed after the device was exposed to dry nitrogen for 6 h. Hysteresis in the current–voltage characteristics was significantly increased after this dehydration, which may be related to changes in the defect density and morphology of MAPI following recrystallization from the hydrate. Based on our observations, we suggest that irreversible decomposition of MAPI in the presence of water vapor only occurs significantly once a grain has been fully converted to the monohydrate phase

D3MOBILE METROLOGY WORLD LEAGUE: TRAINING SECONDARY STUDENTS ON SMARTPHONE-BASED PHOTOGRAMMETRY

The advent of the smartphones brought with them higher processing capabilities and improved camera specifications which boosted the applications of mobile-based imagery in a range of domains. One of them is the 3-D reconstruction of objects by means of photogrammetry, which now enjoys great popularity. This fact brings potential opportunities to develop educational procedures in high schools using smartphone-based 3-D scanning techniques. On this basis, we designed a Project Based e-Learning (PBeL) initiative to introduce secondary students to the disciplines of photogrammetry through the use of their mobile phones in an attractive and challenging way for them. The paper describes the motivation behind the project "D3MOBILE Metrology World League", supported by ISPRS as part of the "Educational and Capacity Building Initiative 2020"programme. With this Science, Technology, Engineering and Mathematics (STEM) initiative, we implement a methodology with the format of an international competition, that can be adapted to daily classwork at the high school level anywhere in the world. Therefore, the championship is essentially structured around a collection of well-thought-out e-learning materials (text guidelines, video tutorials, proposed exercises, etc.), providing a more flexible access to content and instruction at any time and from any place. The methodology allows students to gain spatial skills and to practice other transversal abilities, learn the basics of photogrammetric techniques and workflows, gain experience in the 3-D modelling of simple objects and practice a range of techniques related to the science of measurementS