43 research outputs found
Recommended from our members
Spatial and temporal variability of snowfall over Greenland from CloudSat observations
We use the CloudSat 2006–2016 data record to estimate snowfall over the Greenland Ice Sheet (GrIS). We first evaluate CloudSat snowfall retrievals with respect to remaining ground-clutter issues. Comparing CloudSat observations to the GrIS topography (obtained from airborne altimetry measurements during IceBridge) we find that at the edges of the GrIS spurious high-snowfall retrievals caused by ground clutter occasionally affect the operational snowfall product. After correcting for this effect, the height of the lowest valid CloudSat observation is about 1200 m above the local topography as defined by IceBridge. We then use ground-based millimeter wavelength cloud radar (MMCR) observations obtained from the Integrated Characterization of Energy, Clouds, Atmospheric state, and Precipitation at Summit, Greenland (ICECAPS) experiment to devise a simple, empirical correction to account for precipitation processes occurring between the height of the observed CloudSat reflectivities and the snowfall near the surface. Using the height-corrected, clutter-cleared CloudSat reflectivities we next evaluate various Z–S relationships in terms of snowfall accumulation at Summit through comparison with weekly stake field observations of snow accumulation available since 2007. Using a set of three Z–S relationships that best agree with the observed accumulation at Summit, we then calculate the annual cycle snowfall over the entire GrIS as well as over different drainage areas and compare the derived mean values and annual cycles of snowfall to ERA-Interim reanalysis. We find the annual mean snowfall over the GrIS inferred from CloudSat to be 34±7.5 cm yr−1 liquid equivalent (where the uncertainty is determined by the range in values between the three different Z–S relationships used). In comparison, the ERA-Interim reanalysis product only yields 30 cm yr−1 liquid equivalent snowfall, where the majority of the underestimation in the reanalysis appears to occur in the summer months over the higher GrIS and appears to be related to shallow precipitation events. Comparing all available estimates of snowfall accumulation at Summit Station, we find the annually averaged liquid equivalent snowfall from the stake field to be between 20 and 24 cm yr−1, depending on the assumed snowpack density and from CloudSat 23±4.5 cm yr−1. The annual cycle at Summit is generally similar between all data sources, with the exception of ERA-Interim reanalysis, which shows the aforementioned underestimation during summer months.
</div
The Small Whiskbroom Imager for atmospheric compositioN monitorinG (SWING) and its operations from an unmanned aerial vehicle (UAV) during the AROMAT campaign
The Small Whiskbroom Imager for atmospheric compositioN monitorinG (SWING) is a compact remote sensing instrument dedicated to mapping trace gases from an unmanned aerial vehicle (UAV). SWING is based on a compact visible spectrometer and a scanning mirror to collect scattered sunlight. Its weight, size, and power consumption are respectively 920g, 27cm × 12cm × 8cm, and 6W. SWING was developed in parallel with a 2.5m flying-wing UAV. This unmanned aircraft is electrically powered, has a typical airspeed of 100km h−1, and can operate at a maximum altitude of 3km.
We present SWING-UAV experiments performed in Romania on 11 September 2014 during the Airborne ROmanian Measurements of Aerosols and Trace gases (AROMAT) campaign, which was dedicated to test newly developed instruments in the context of air quality satellite validation. The UAV was operated up to 700m above ground, in the vicinity of the large power plant of Turceni (44.67°N, 23.41°E; 116m a. s. l. ). These SWING-UAV flights were coincident with another airborne experiment using the Airborne imaging differential optical absorption spectroscopy (DOAS) instrument for Measurements of Atmospheric Pollution (AirMAP), and with ground-based DOAS, lidar, and balloon-borne in situ observations.
The spectra recorded during the SWING-UAV flights are analysed with the DOAS technique. This analysis reveals NO2 differential slant column densities (DSCDs) up to 13±0.6×1016molec cm−2. These NO2 DSCDs are converted to vertical column densities (VCDs) by estimating air mass factors. The resulting NO2 VCDs are up to 4.7±0.4×1016molec cm−2. The water vapour DSCD measurements, up to 8±0.15×1022molec cm−2, are used to estimate a volume mixing ratio of water vapour in the boundary layer of 0.013±0.002mol mol−1. These geophysical quantities are validated with the coincident measurements
Constraining industrial ammonia emissions using hyperspectral infrared imaging
Atmospheric emissions of reactive nitrogen in the form of nitrogen dioxide (NO) and ammonia (NH) worsen air quality and upon deposition, dramatically affect the environment. Recent infrared satellite measurements have revealed that NH emitted by industries are an important and underestimated emission source. Yet, to assess these emissions, current satellite sounders are severely limited by their spatial resolution. In this paper, we analyse measurement data recorded in a series of imaging surveys that were conducted over industries in the Greater Berlin area (Germany). On board the aircraft were the Telops Hyper-Cam LW, targeting NH measurements in the longwave infrared at a resolution of 4 m and the SWING+ spectrometer targeting NO
measurements in the UV–Vis at a resolution of 180 m.
Two flights were carried out over German’s largest production facility of synthetic NH
, urea and other fertilizers. In both cases, a large NH plume was observed originating from the factory. Using a Gaussian plume model to take into account plume rise and dispersion, coupled with well-established radiative transfer and inverse methods, we retrieve vertical column densities. From these, we calculate NH emission fluxes using the integrated mass enhancement and cross-sectional flux methods, yielding consistent emissions of the order of 2200 t yr−1 for both flights, assuming constant fluxes across the year. These estimates are about five times larger than those reported in the European Pollutant Release and Transfer Register (E-PRTR) for this plant. In the second campaign, a co-emitted NO
plume was measured, likely related to the production of nitric acid at the plant.
A third flight was carried out over an area comprising the cities of Staßfurt and Bernburg. Several small NH
plumes were seen, one over a production facility of mineral wool insulation, one over a sugar factory and two over the soda ash plants in Staßfurt and Bernburg. A fifth and much larger plume was seen to originate from the sedimentation basins associated with the soda ash plant in Staßfurt, indicating rapid volatilization of ammonium rich effluents. We use the different measurement campaigns to simulate measurements of Nitrosat, a potential future satellite sounder dedicated to the sounding of reactive nitrogen at a resolution of 500 m. We demonstrate that such measurements would allow accurately constraining emissions in a single overpass, overcoming a number of important drawbacks of current satellite sounders
Observations of the downwelling far-infrared atmospheric emission at the Zugspitze observatory
Retrieval of chlorophyll fluorescence from a large distance using oxygen absorption bands
The detection of solar induced chlorophyll fluorescence (SIF) in the field with spectrometers is based on the depth of the solar Fraunhofer or oxygen absorption lines in the upwelling radiance compared to that in the downwelling irradiance. This relative depth enables the differentiation of SIF from the reflected radiation. Recent studies have shown that if oxygen bands are used to retrieve SIF from tower-based measurements, then atmospheric correction is required. This study presents a band shape fitting (BSF) approach to retrieve both the relative optical path length (deepening) and SIF (infilling) from field measurements at the same time, using information in the measured spectral shape of the O2 feature. This approach is an alternative to using radiative transfer process models for estimating atmospheric transmittance. The method was applied to measurements taken from 100 m elevation above a forest, yielding plausible results for SIF in the O2A and O2B bands. The sensitivity to combined atmospheric and instrument characteristics prohibits application at much greater distances from the surface
Hyperspectral imaging of ammonia and other trace gases in the atmospheric boundary layer
info:eu-repo/semantics/nonPublishe
Examination of sun-induced fluorescence (SIF) signal on heterogeneous ecosystem platforms using ‘HyPlant’
Aircraft observations of NH3 from agricultural sources
info:eu-repo/semantics/nonPublishe