Proceedings of IMECE

ABSTRACT Reduction of exhaust emissions is a major research task in diesel engine development in view o

Evaluation of a Semiempirical, Zero-Dimensional, Multizone Model to Predict Nitric Oxide Emissions in DI Diesel Engines’ Combustion Chamber

In the present study, a semiempirical, zero-dimensional multizone model, developed by the authors, is implemented on two automotive diesel engines, a heavy-duty truck engine and a light-duty passenger car engine with pilot fuel injection, for various operating conditions including variation of power/speed, EGR rate, fuel injection timing, fuel injection pressure, and boost pressure, to verify its capability for Nitric Oxide (NO) emission prediction. The model utilizes cylinder’s basic geometry and engine operating data and measured cylinder pressure to estimate the apparent combustion rate which is then discretized into burning zones according to the calculation step used. The requisite unburnt charge for the combustion in the zones is calculated using the zone equivalence ratio provided from a new empirical formula involving parameters derived from the processing of the measured cylinder pressure and typical engine operating parameters. For the calculation of NO formation, the extended Zeldovich mechanism is used. From this approach, the model is able to provide the evolution of NO formation inside each burned zone and, cumulatively, the cylinder’s NO formation history. As proven from the investigation conducted herein, the proposed model adequately predicts NO emissions and NO trends when the engine settings vary, with low computational cost. These encourage its use for engine control optimization regarding NOx abatement and real-time/model-based NOx control applications

Review of Biofuel Effect on Emissions of Various Types of Marine Propulsion and Auxiliary Engines

The International Maritime Organization aims to reduce the maritime industry’s carbon emissions by 40% in the next two decades and has introduced measures to control CO2 emissions. These have significantly increased interest regarding biofuels, which can be used immediately on existing vessels, reducing their carbon footprint. The most common variant is B30, a blend of 70% crude oil and 30% biodiesel. Concerns exist for the potential effect on engine performance and NOx emissions. Scientific works on the subject are limited for two-stroke marine engines, while some studies are available for four-stroke ones, usually auxiliaries. To increase information availability on the subject, in this work, we review the results of testing on multiple marine engine types, two-stroke propulsion and four-stroke auxiliary units using B30 and conventional fuels. The effect on emissions and fuel efficiency is examined and cross-referenced with the available literature. A small increase in specific fuel consumption was observed for B30 use that varied with engine type. The increase was on average 1% for two-stroke and 2.5% for four-stroke engines. The effect of B30 on NOx emissions was low but varied between engines. For low-speed two-stroke engines, NOx increase was on average 4% compared to crude oil, and 2.4% for four-stroke auxiliary units, albeit with higher variance. For some four-stroke units, a decrease in emissions was found. All previous results were in line with other published studies. Overall, it was found that while biofuel effect can vary considerably between applications, 30% biodiesel blends can be used with no concerns regarding emissions and fuel efficiency

Design of Container Ship Main Engine Waste Heat Recovery Supercritical CO₂ Cycles, Optimum Cycle Selection through Thermo-Economic Optimization with Genetic Algorithm and Its Exergo-Economic and Exergo-Environmental Analysis

In the present study, energy and exergy analyses of a simple supercritical, a split supercritical and a cascade supercritical CO2 cycle are conducted. The bottoming cycles are coupled with the main two-stroke diesel engine of a 6800 TEU container ship. An economic analysis is carried out to calculate the total capital cost of these installations. The functional parameters of these cycles are optimized to minimize the electricity production cost (EPC) using a genetic algorithm. Exergo-economic and exergo-environmental analyses are conducted to calculate the cost of the exergetic streams and various exergo-environmental parameters. A parametric analysis is performed for the optimum bottoming cycle to investigate the impact of ambient conditions on the energetic, exergetic, exergo-economic and exergo-environmental key performance indicators. The theoretical results of the integrated analysis showed that the installation and operation of a waste heat recovery optimized split supercritical CO2 cycle in a 6800 TEU container ship can generate almost 2 MW of additional electric power with a thermal efficiency of 14%, leading to high fuel and CO2 emission savings from auxiliary diesel generators and contributing to economically viable shipping decarbonization

Design of Container Ship Main Engine Waste Heat Recovery Supercritical CO2 Cycles, Optimum Cycle Selection through Thermo-Economic Optimization with Genetic Algorithm and Its Exergo-Economic and Exergo-Environmental Analysis

In the present study, energy and exergy analyses of a simple supercritical, a split supercritical and a cascade supercritical CO2 cycle are conducted. The bottoming cycles are coupled with the main two-stroke diesel engine of a 6800 TEU container ship. An economic analysis is carried out to calculate the total capital cost of these installations. The functional parameters of these cycles are optimized to minimize the electricity production cost (EPC) using a genetic algorithm. Exergo-economic and exergo-environmental analyses are conducted to calculate the cost of the exergetic streams and various exergo-environmental parameters. A parametric analysis is performed for the optimum bottoming cycle to investigate the impact of ambient conditions on the energetic, exergetic, exergo-economic and exergo-environmental key performance indicators. The theoretical results of the integrated analysis showed that the installation and operation of a waste heat recovery optimized split supercritical CO2 cycle in a 6800 TEU container ship can generate almost 2 MW of additional electric power with a thermal efficiency of 14%, leading to high fuel and CO2 emission savings from auxiliary diesel generators and contributing to economically viable shipping decarbonization