Welfare effects of subsidizing a dead-end network of less polluting vehicles

This article shows that in the presence of environmental externalities, it may be welfare enhancing to overcome a technological lock-in by a dead- end technology through governmental intervention. It is socially desirable to subsidize a dead-end technology if its environmental externality is small relative to the one of the established technology, if the installed base and/or the strength of the network effect is small and if future generations matter. Applying our results to the private transport sector, governments promoting alternatives to gasoline-driven vehicles have to be aware of these opposing welfare effects.environmental externalities; network effects; private transport; technological change

Welfare effects of subsidizing a dead-end network of less polluting vehicles

This article shows that in the presence of environmental externalities, it may be welfare enhancing to overcome a technological lock-in by a deadend technology through governmental intervention. It is socially desirable to subsidize a dead-end technology if its environmental externality is small relative to the one of the established technology, if the installed base and/or the strength of the network effect is small and if future generations matter. Applying our results to the private transport sector, governments promoting alternatives to gasoline-driven vehicles have to be aware of these opposing welfare effects. --environmental externalities,network effects,private transport,technological change

Governmental platform intermediation to promote alternative fuel vehicles

Many governments promote green technological innovation within the automobile sector as a means of combating climate change. Most of these innovations are driven by alternative fuels. Buyer's premiums and governmental investment in service infrastructure are widely used. This paper investigates the question regarding whether market intervention is adequate by considering the two-sided market character of the automobile market. This study shows that network effects, competition effects triggered by more automobile users and decreasing marginal utilities of further service stations determine the welfare-efficient extent of governmental intervention. The results of the analysis indicate that governmental promotion of service infrastructure is reasonable, although governments should be cautious about buyer's premiums

Agentenbasierter Handel auf Spotmärkten am Beispiel eines Energiemarktszenarios

Der drohende Klimawandel mit der Forderung den CO2 Ausstoß zu minimieren und der geplante Atomausstieg werfen zahlreiche neue Fragestellungen auf. Daher liegt der Focus der vorliegenden Arbeit auf dem Verkauf und Kauf von dezentral erzeugtem Strom aus alternativen Energiequellen. Durch die vorliegende Arbeit sollen privaten Käufern und Verkäufern in einem Spotmarkt für dezentral erzeugten Strom, verschiedene Unterstützungsmöglichkeiten zur Verfügung gestellt werden

Welfare effects of subsidizing a dead-end network of less polluting vehicles

This article shows that in the presence of environmental externalities, it may be welfare enhancing to overcome a technological lock-in by a dead- end technology through governmental intervention. It is socially desirable to subsidize a dead-end technology if its environmental externality is small relative to the one of the established technology, if the installed base and/or the strength of the network effect is small and if future generations matter. Applying our results to the private transport sector, governments promoting alternatives to gasoline-driven vehicles have to be aware of these opposing welfare effects

Welfare effects of subsidizing a dead-end network of less polluting vehicles

This article shows that in the presence of environmental externalities, it may be welfare enhancing to overcome a technological lock-in by a dead- end technology through governmental intervention. It is socially desirable to subsidize a dead-end technology if its environmental externality is small relative to the one of the established technology, if the installed base and/or the strength of the network effect is small and if future generations matter. Applying our results to the private transport sector, governments promoting alternatives to gasoline-driven vehicles have to be aware of these opposing welfare effects

Impact of different water activities (aw) adjusted by solutes on high pressure high temperature inactivation of Bacillus amyloliquefaciens spores

Much research has been conducted to comprehend the mechanisms of high pressure (HP) inactivation of spores in aqueous systems but for food model systems these information are scarce. In these systems spores can interact with ingredients which then could possibly lead to retarded or reduced inactivation, which can cause a problem for the sterilization process. The protective mechanism of a reduced aw-value is still unclear. HP processing might prove valuable to overcome protective effects of solutes and achieve shorter process times for sterilization under HP. To gain insight into the underlying mechanisms five aw-values (0.9, 0.92, 0.94, 0.96, 1) were adjusted with two different solutes (NaCl, sucrose). Solutions were inoculated with spores of Bacillus amyloliquefaciens and treated at 105, 110, and 115°C at 600 MPa. Further a thermal inactivation was conducted at the same temperatures for a comparison with the HP data. Afterward, the influence of HP high temperature treatment on the inactivation, the dipicolinic acid (DPA)-release and membrane constitution was assessed by plate count, HPLC and flow cytometry (FCM). The results show that during HP treatments sucrose and salt both have a protective effect, in which the influence of sucrose on the retarded inactivation is higher. The threshold water activities (aw), which is 0.94, here salt and sucrose have a significant influence on the inactivation. The comparison of thermal (105–115°C) and HP and high temperature (600 MPa, 105–115°C) treated samples showed that the time needed to achieve a 4–5 log10 inactivation is reduced from 45 (aw = 1) to 75 (aw = 0.9) min at 105°C to 3 (aw = 1) to 15 (aw = 0.9) minutes at 600 MPa and 105°C. The release of DPA is the rate limiting step of the inactivation and therefore monitoring the release is of great interest. The DPA-release is slowed down in high concentrated solutions (e.g., sucrose, salt) in comparison to aw 1. Since there is a difference in the way the solutes protect the spore it could be seen as an inner spore membrane effect. Maybe as shown for vegetative microorganism the solutes can interact with membranes, e.g., the inner spore membrane. Flow cytometry (FCM) measurement data show a similar trend

Increases in Soil Aggregation Following Phosphorus Additions in a Tropical Premontane Forest are Not Driven by Root and Arbuscular Mycorrhizal Fungal Abundances

Tropical ecosystems have an important role in global change scenarios, in part because they serve as a large terrestrial carbon pool. Carbon protection is mediated by soil aggregation processes, whereby biotic and abiotic factors influence the formation and stability of aggregates. Nutrient additions may affect soil structure indirectly by simultaneous shifts in biotic factors, mainly roots, and fungal hyphae, but also via impacts on abiotic soil properties. Here, we tested the hypothesis that soil aggregation will be affected by nutrient additions primarily via changes in arbuscular mycorrhizal fungal (AMF) hyphae and root length in a pristine tropical forest system. Therefore, the percentage of water-stable macroaggregates (> 250 μm) (WSA) and the soil mean weight diameter (MWD) was analyzed, as well as nutrient contents, pH, root length, and AMF abundance. Phosphorus additions significantly increased the amount of WSA, which was consistent across two different sampling times. Despite a positive effect of phosphorus additions on extra-radical AMF biomass, no relationship between WSA and extra-radical AMF nor roots was revealed by regression analyses, contrary to the proposed hypothesis. These findings emphasize the importance of analyzing soil structure in understudied tropical systems, since it might be affected by increasing nutrient deposition expected in the future

X-ray Based Visualization of the Electrolyte Filling Process of Lithium Ion Batteries

The electrolyte filling process constitutes the interface between cell assembly and formation of lithium ion batteries. Electrolyte filling is known as a quality critical and also time consuming process step. To avoid limitations in battery quality a homogeneous electrolyte distribution is necessary. Therefore, especially large sized cells are stored for hours. To accelerate filling and wetting processes the effect of materials- and process parameters on electrolyte distribution needs to be investigated. Unfortunately, in situ methods to characterize the filling and wetting state are still rare, limited in availability or even time-consuming in preparation. To overcome these drawbacks this paper introduces X-ray as an innovative method to visualize the electrolyte filling process in large scaled lithium ion batteries. Therefore, an experimental setup was developed to enable in situ X-ray measurements during the filling process of large scaled cells. Additionally, an evaluation process for the optical data was proposed. Based on these images the suitability of X-ray as visualization method is shown considering three exemplary filling parameters.BMBF, 03XP0069A, Cell-Fi - Beschleunigung der Elektrolytaufnahme durch optimierte Befüllungs- und Wettingprozess

32‐Channel self‐grounded bow‐tie transceiver array for cardiac MR at 7.0T

Purpose Design, implementation, evaluation, and application of a 32‐channel Self‐Grounded Bow‐Tie (SGBT) transceiver array for cardiac MR (CMR) at 7.0T. Methods The array consists of 32 compact SGBT building blocks. Transmission field (B1+) shimming and radiofrequency safety assessment were performed with numerical simulations and benchmarked against phantom experiments. In vivo B1+ efficiency mapping was conducted with actual flip angle imaging. The array’s applicability for accelerated high spatial resolution 2D FLASH CINE imaging of the heart was examined in a volunteer study (n = 7). Results B1+ shimming provided a uniform field distribution suitable for female and male subjects. Phantom studies demonstrated an excellent agreement between simulated and measured B1+ efficiency maps (7% mean difference). The SGBT array afforded a spatial resolution of (0.8 × 0.8 × 2.5) mm3 for 2D CINE FLASH which is by a factor of 12 superior to standardized cardiovascular MR (CMR) protocols. The density of the SGBT array supports 1D acceleration of up to R = 4 (mean signal‐to‐noise ratio (whole heart) ≥ 16.7, mean contrast‐to‐noise ratio ≥ 13.5) without impairing image quality significantly. Conclusion The compact SGBT building block facilitates a modular high‐density array that supports accelerated and high spatial resolution CMR at 7.0T. The array provides a technological basis for future clinical assessment of parallel transmission techniques.EC/H2020/743077/EU/Thermal Magnetic Resonance: A New Instrument to Define the Role of Temperature in Biological Systems and Disease for Diagnosis and Therapy/ThermalMRBMBF, 01QE1815, Verbundprojekt: Seeing is Believing: Revolution der bildgebenden Diagnostik und Therapiekontrolle des Körperstammes durch superaufgelöste Hochfeld-Magnetresonanztomographie; Teilprojekt: Industrielle Forschung und Entwicklung lokaler Radiofrequenz-Antennen für hochauflösende Hochfeld-MRT des Körperstamme