Three dimensional in-vitro models for studying cancer angiogenesis

Introduction Hydrogels prepared from star-shaped poly(ethylene glycol) (PEG) and maleimide-functionalized heparin provide a potential matrix for use in developing three dimensional (3D) models. We have previously demonstrated that these hydrogels support the cultivation of human umbilical vein endothelial cells (HUVECs). We extend this body of work to study the ability to create an extracellular matrix (ECM)-like model to study breast and prostate cancer cell growth in 3D. Also, we investigate the ability to produce a tri-culture mimicking tumour angiogenesis with cancer spheroids, HUVECs and mesenchymal stem cells (MSCs). Materials and Methods The breast cancer cell lines, MCF-7 and MDA-MB-231, and prostate cancer cell lines, LNCaP and PC3, were seeded into starPEG-heparin hydrogels and grown for 14 Days to analyze the effects of varying hydrogel stiffness on spheroid development. Resulting hydrogel constructs were analyzed via proliferation assays, light microscopy, and immunostaining. Cancer cell lines were then seeded into starPEG-heparin hydrogels functionalized with growth factors as spheroids with HUVECs and MSCs and grown as a tri-culture. Cultures were analyzed via immunostaining and observed using confocal microscopy. Results Cultures prepared in MMP-cleavable starPEG-heparin hydrogels display spheroid formation in contrast to adherent growth on tissue culture plastic. Small differences were visualized in cancer spheroid growth between different gel stiffness across the range of cell lines. Cancer cell lines were able to be co-cultivated with HUVECs and MSC. Interaction was visualized between tumours and HUVECs via confocal microscopy. Further studies intend to further optimize and mimic the ECM environment of in-situ tumour angiogenesis. Discussion Our results confirm the suitability of hydrogels constructed from starPEG-heparin for HUVEC and MSC co-cultivation with cancer cell lines to study cell-cell and cell-matrix interactions in a 3D environment. This represents a step forward in the development of 3D culture models to study the pathomechanisms of breast and prostate cancer

In vivo characterization of 3D-printed polycaprolactone-hydroxyapatite scaffolds with Voronoi design to advance the concept of scaffold-guided bone regeneration

Three-dimensional (3D)-printed medical-grade polycaprolactone (mPCL) composite scaffolds have been the first to enable the concept of scaffold-guided bone regeneration (SGBR) from bench to bedside. However, advances in 3D printing technologies now promise next-generation scaffolds such as those with Voronoi tessellation. We hypothesized that the combination of a Voronoi design, applied for the first time to 3D-printed mPCL and ceramic fillers (here hydroxyapatite, HA), would allow slow degradation and high osteogenicity needed to regenerate bone tissue and enhance regenerative properties when mixed with xenograft material. We tested this hypothesis in vitro and in vivo using 3D-printed composite mPCL-HA scaffolds (wt 96%:4%) with the Voronoi design using an ISO 13485 certified additive manufacturing platform. The resulting scaffold porosity was 73% and minimal in vitro degradation (mass loss <1%) was observed over the period of 6 months. After loading the scaffolds with different types of fresh sheep xenograft and ectopic implantation in rats for 8 weeks, highly vascularized tissue without extensive fibrous encapsulation was found in all mPCL-HA Voronoi scaffolds and endochondral bone formation was observed, with no adverse host-tissue reactions. This study supports the use of mPCL-HA Voronoi scaffolds for further testing in future large preclinical animal studies prior to clinical trials to ultimately successfully advance the SGBR concept

Assessment of static and perfusion methods for decellularization of PCL membrane-supported periodontal ligament cell sheet constructs

Decellularization aims to harness the regenerative properties of native extracellular matrix. The objective of this study was to evaluate different methods of decellularization of periodontal ligament cell sheets whilst maintaining their structural and biological integrity.Human periodontal ligament cell sheets were placed onto melt electrospun polycaprolactone (PCL) membranes that reinforced the cell sheets during the various decellularization protocols. These cell sheet constructs (CSCs) were decellularized under static/perfusion conditions using a) 20 mM ammonium hydroxide (NH4OH)/Triton X-100, 0.5% v/v; and b) sodium dodecyl sulfate (SDS, 0.2% v/v), both +/- DNase besides Freeze-thaw (F/T) cycling method. CSCs were assessed using a collagen quantification assay, immunostaining and scanning electron microscopy. Residual fibroblast growth factor (bFGF), vascular endothelial growth factor (VEGF) and hepatocyte growth factor (HGF) were assessed with Bio-plex assays.DNA removal without DNase was higher under static conditions. However, after DNase treatment, there were no differences between the different decellularization methods with virtually 100% DNA removal. DNA elimination in F/T was less efficient even after DNase treatment. Collagen content was preserved with all techniques, except with SDS treatment. Structural integrity was preserved after NH4OH/Triton X-100 and F/T treatment, while SDS altered the extracellular matrix structure. Growth factor amounts were reduced after decellularization with all methods, with the greatest reduction (to virtually undetectable amounts) following SDS treatment, while NH4OH/Triton X-100 and DNase treatment resulted in approximately 10% retention.This study showed that treatment with NH4OH/Triton X-100 and DNase solution was the most efficient method for DNA removal and the preservation of extracellular matrix integrity and growth factors retention

Biofabrication of customized bone grafts by combination of additive manufacturing and bioreactor knowhow

This study reports on an original concept of additive manufacturing for the fabrication of tissue engineered constructs (TEC), offering the possibility of concomitantly manufacturing a customized scaffold and a bioreactor chamber to any size and shape. As a proof of concept towards the development of anatomically relevant TECs, this concept was utilized for the design and fabrication of a highly porous sheep tibia scaffold around which a bioreactor chamber of similar shape was simultaneously built. The morphology of the bioreactor/scaffold device was investigated by micro-computed tomography and scanning electron microscopy confirming the porous architecture of the sheep tibiae as opposed to the non-porous nature of the bioreactor chamber. Additionally, this study demonstrates that both the shape, as well as the inner architecture of the device can significantly impact the perfusion of fluid within the scaffold architecture. Indeed, fluid flow modelling revealed that this was of significant importance for controlling the nutrition flow pattern within the scaffold and the bioreactor chamber, avoiding the formation of stagnant flow regions detrimental for in vitro tissue development. The bioreactor/scaffold device was dynamically seeded with human primary osteoblasts and cultured under bi-directional perfusion for two and six weeks. Primary human osteoblasts were observed homogenously distributed throughout the scaffold, and were viable for the six week culture period. This work demonstrates a novel application for additive manufacturing in the development of scaffolds and bioreactors. Given the intrinsic flexibility of the additive manufacturing technology platform developed, more complex culture systems can be fabricated which would contribute to the advances in customized and patient-specific tissue engineering strategies for a wide range of applications.This work was supported by the NHMRC, the Australian Research Council and Hans Fischer Senior Fellowship, IAS-TUM. Pedro Costa acknowledges the Portuguese Foundation for Science and Technology for his PhD grant (SFRH/BD/62452/2009)

Vascularised bone transfer: history, blood supply and contemporary problems

Background Since the description of the free fibula flap by Taylor in 1975, many flaps composed of bone have been described. This review documents the history of vascularised bone transfer and reflects on the current understanding of blood supply in an effort to define all clinically described osseous flaps. Methods A structured review of MEDLINE and Google Scholar was performed to identify all clinically described bone flaps in humans. Data regarding patterns of vascularity were collected where available from the anatomical literature. Results Vascularised bone transfer has evolved stepwise in concert with advances in reconstructive surgery techniques. This began with local flaps of the craniofacial skeleton in the late 19th century, followed by regional flaps such as the fibula flap for tibial reconstruction in the early 20th century. Prelaminated and pedicled myo-osseous flaps predominated until the advent of microsurgery and free tissue transfer in the 1960s and 1970s. Fifty-two different bone flaps were identified from 27 different bones. These flaps can be broadly classified into three types to reflect the pedicle: nutrient vessel (NV), penetrating periosteal vessel (PPV) and non-penetrating periosteal vessel (NPPV). NPPVs can be further classified according to the anatomical structure that serves as a conduit for the pedicle which may be direct-periosteal, musculoperiosteal or fascioperiosteal. Discussion The blood supply to bone is well described and is important to the reconstructive surgeon in the design of reliable vascularised bone suitable for transfer into defects requiring osseous replacement. Further study in this field could be directed at the implications of the pattern of bone flap vascularity on reconstructive outcomes, the changes in bone vascularity after osteotomy and the existence of “true” and “choke” anastomoses in cortical bone

A Validated Preclinical Animal Model for Primary Bone Tumor Research

Funding for this study was provided by the German Research Foundation (Grant DFG WA 3606/1-1 to F. Wagner and Grant HO 5056/1-1 to B.M. Holzapfel), the Australian Research Council (Future Fellowship Program) and the Technical University Munich Hans Fischer Senior Fellowship (D.W. Hutmacher), and a Research Fellowship from the National Health and Medical Research Council (#1044091 to J.-P. Lévesque

Scaffold-based bone engineering by using rapid prototyping technologies

Scaffold based bone tissue engineering aims to heal bone defects with autologous cells and scaffolds without the donor site morbidity and expense associated with harvesting autogenous bone. One such strategy involves seeding autologous osteogenic cells in vitro throughout a biodegradable scaffold to create a scaffold-cell hybrid that may be called a Tissue Engineering Construct (TEC). The chapter aims to discuss the advances in the use of scaffold based bone engineering aimed at familiarizing the reader with the principles in the context of bone engineering. The scaffold materials, their design and use in the making of tissue engineered bone construct will be discussed with special emphasis placed on composites scaffolds made by rapid prototyping systems.</p

Scaffolds in tissue engineering bone and cartilage

Musculoskeletal tissue, bone and cartilage are under extensive investigation in tissue engineering research. A number of biodegradable and bioresorbable materials, as well as scaffold designs, have been experimentally and/or clinically studied. Ideally, a scaffold should have the following characteristics: (i) three-dimensional and highly porous with an interconnected pore network for cell growth and flow transport of nutrients and metabolic waste; (ii) biocompatible and bioresorbable with a controllable degradation and resorption rate to match cell/tissue growth in vitro and/or in vivo; (iii) suitable surface chemistry for cell attachment, proliferation, and differentiation and (iv) mechanical properties to match those of the tissues at the site of implantation. This paper reviews research on the tissue engineering of bone and cartilage from the polymeric scaffold point of view.</p