74 research outputs found
Osteoinduction and osteoimmunology: Emerging concepts.
The recognition and importance of immune cells during bone regeneration, including around bone biomaterials, has led to the development of an entire field termed "osteoimmunology," which focuses on the connection and interplay between the skeletal system and immune cells. Most studies have focused on the "osteogenic" capacity of various types of bone biomaterials, and much less focus has been placed on immune cells despite being the first cell type in contact with implantable devices. Thus, the amount of literature generated to date on this topic makes it challenging to extract needed information. This review article serves as a guide highlighting advancements made in the field of osteoimmunology emphasizing the role of the osteoimmunomodulatory properties of biomaterials and their impact on osteoinduction. First, the various immune cell types involved in bone biomaterial integration are discussed, including the prominent role of osteal macrophages (OsteoMacs) during bone regeneration. Thereafter, key biomaterial properties, including topography, wettability, surface charge, and adsorption of cytokines, growth factors, ions, and other bioactive molecules, are discussed in terms of their impact on immune responses. These findings highlight and recognize the importance of the immune system and osteoimmunology, leading to a shift in the traditional models used to understand and evaluate biomaterials for bone regeneration
The effect of connective tissue graft or a collagen matrix on epithelial differentiation around teeth and dental implants: a preclinical study in minipigs
This study aimed to histologically evaluate the healing at 8 weeks after coronally advanced flap (CAF) with either a superficial (SCTG) or deep palatal connective tissue graft (DCTG), or a collagen matrix (CM) to cover recession defects at teeth and implants.One mandibular side of 6 miniature pigs received each 3 titanium implants 12 weeks after extraction. Eight weeks later, recession defects were created around implants and contralateral premolars and 4 weeks later randomly subjected to CAF + SCTG, CAF + DCTG, or CAF + CM. After 8 weeks, block biopsies were histologically analyzed.For the primary outcome, i.e., keratinization of the epithelium, all teeth and implants exhibited a keratinized epithelium with no histological differences among them also not in terms of statistically significant differences in length (SCTG 0.86 ± 0.92 mm, DCTG 1.13 ± 0.62 mm, and Cm, 1.44 ± 0.76 mm). Pocket formation was histologically seen at all teeth, around most implants with SCTG and DCTG, however not in the CM implant group. The connective tissue grafts showed hardly signs of degradation, whereas the CM was partly degraded and integrated in connective tissue. The mean gain in gingival height was similar in all experimental groups (SCTG 3.89 ± 0.80 mm, DCTG 4.01 ± 1.40 mm, CM 4.21 ± 0.64 mm). Statistically significant differences were found in the height of the junctional epithelium between the control teeth and the connective tissue groups (p = 0.009 and 0.044).In this animal model, the use of either a superficial or deep connective tissue graft or a collagen membrane did not seem to have any impact on the epithelial keratinization around both teeth and implants. All procedures (CAF + SCTG/DCTG/CM) resulted in a long JE that was even longer at implants.Deep/superficial palatal connective tissue graft yielded similar keratinization around teeth/implants. Given the absence of pocket formation and inflammatory processes at implants when using a CM, CAF + CM might bear potential clinical benefits
Histological evaluation following treatment of recession-type defects with coronally advanced flap and a novel human recombinant amelogenin.
OBJECTIVES
To histologically evaluate the effects of a novel human recombinant amelogenin (rAmelX) on periodontal wound healing / regeneration in recession-type defects.
MATERIALS AND METHODS
A total of 17 gingival recession-type defects were surgically created in the maxilla of three minipigs. The defects were randomly treated with a coronally advanced flap (CAF) and either rAmelX (test), or a CAF and placebo (control). At three months following reconstructive surgery, the animals were euthanized, and the healing outcomes histologically evaluated.
RESULTS
The test group yielded statistically significantly (p = 0.047) greater formation of cementum with inserting collagen fibers compared with the control group (i.e., 4.38 mm ± 0.36 mm vs. 3.48 mm ± 1.13 mm). Bone formation measured 2.15 mm ± 0.8 mm in the test group and 2.24 mm ± 1.23 mm in the control group, respectively, without a statistically significant difference (p = 0.94).
CONCLUSIONS
The present data have provided for the first-time evidence for the potential of rAmelX to promote regeneration of periodontal ligament and root cementum in recession-type defects, thus warranting further preclinical and clinical testing.
CLINICAL RELEVANCE
The present results set the basis for the potential clinical application of rAmelX in reconstructive periodontal surgery
Histological evaluation following treatment of recession-type defects with coronally advanced flap and a novel human recombinant amelogenin
ObjectivesTo histologically evaluate the effects of a novel human recombinant amelogenin (rAmelX) on periodontal wound healing / regeneration in recession-type defects.Materials and methodsA total of 17 gingival recession-type defects were surgically created in the maxilla of three minipigs. The defects were randomly treated with a coronally advanced flap (CAF) and either rAmelX (test), or a CAF and placebo (control). At three months following reconstructive surgery, the animals were euthanized, and the healing outcomes histologically evaluated.ResultsThe test group yielded statistically significantly (p = 0.047) greater formation of cementum with inserting collagen fibers compared with the control group (i.e., 4.38 mm & PLUSMN; 0.36 mm vs. 3.48 mm & PLUSMN; 1.13 mm). Bone formation measured 2.15 mm & PLUSMN; 0.8 mm in the test group and 2.24 mm & PLUSMN; 1.23 mm in the control group, respectively, without a statistically significant difference (p = 0.94).ConclusionsThe present data have provided for the first-time evidence for the potential of rAmelX to promote regeneration of periodontal ligament and root cementum in recession-type defects, thus warranting further preclinical and clinical testing
Bone conditioned media (BCM) improves osteoblast adhesion and differentiation on collagen barrier membranes
Background: The use of autogenous bone chips during guided bone regeneration procedures has remained the gold standard for bone grafting due to its excellent combination of osteoconduction, osteoinduction and osteogenesis. Recent protocols established by our group have characterized specific growth factors and cytokines released from autogenous bone that have the potential to be harvested and isolated into bone conditioned media (BCM). Due to the advantageous osteo-promotive properties of BCM, the aims of the present study was to pre-coat collagen barrier membranes with BCM and investigate its effect on osteoblast adhesion, proliferation and differentiation for possible future clinical use.
Methods: Scanning electron microscopy (SEM) was first used to qualitative assess BCM protein accumulation on the surface of collagen membranes. Thereafter, undifferentiated mouse ST2 stromal bone marrow cells were seeded onto BioGide porcine derived collagen barrier membranes (control) or barrier membranes pre-coated with BCM (test group). Control and BCM samples were compared for cell adhesion at 8 h, cell proliferation at 1, 3 and 5 days and real-time PCR at 5 days for osteoblast differentiation markers including Runx2, alkaline phosphatase (ALP), osteocalcin (OCN) and bone sialoprotein (BSP). Mineralization was further assessed with alizarin red staining at 14 days post seeding.
Results: SEM images demonstrated evidence of accumulated proteins found on the surface of collagen membranes following coating with BCM. Analysis of total cell numbers revealed that the additional pre-coating with BCM markedly increased cell attachment over 4 fold when compared to cells seeded on barrier membranes alone. No significant difference could be observed for cell proliferation at all time points. BCM significantly increased mRNA levels of osteoblast differentiation markers including ALP, OCN and BSP at 5 days post seeding. Furthermore, barrier membranes pre-coated with BCM demonstrated a 5-fold increase in alizarin red staining at 14 days.
Conclusion: The results from the present study suggest that the osteoconductive properties of porcine-derived barrier membranes could be further improved by BCM by significantly increasing cell attachment, differentiation and mineralization of osteoblasts in vitro. Future animal testing is required to fully characterize the additional benefits of BCM for guided bone regeneration
Investigating the Response of Human Neutrophils to Hydrophilic and Hydrophobic Micro-Rough Titanium Surfaces.
Various treatments have been used to change both the topography and chemistry of titanium surfaces, aiming to enhance tissue response and reduce healing times of endosseous implants. Most studies to date focused on bone healing around dental implants occurring later during the healing cascade. However, the impact of the initial inflammatory response in the surgical wound site on the success and healing time of dental implants is crucial for implant integration and success, yet it is still poorly understood. The purpose of this study was to investigate the effect of titanium surface hydrophilicity on the response of human neutrophils by monitoring oxygen radical production, which was measured as chemiluminescence activity. Materials and Methods: Neutrophils were isolated from human donors' blood buffy coats using the double sucrose gradient method. Neutrophils were exposed to both hydrophilic and hydrophobic titanium surfaces with identical topographies in the presence and absence of human serum. This resulted in six experimental groups including two different implant surfaces, with and without exposure to human serum, and two control groups including an active control with cells alone and a passive control with no cells. Two samples from each group were fixed and analyzed by SEM. Comparisons between surface treatments for differences in chemiluminescence values were performed using analysis of variance ANOVA. Results and Conclusion: In the absence of exposure to serum, there was no significant difference noted between the reaction of neutrophils to hydrophilic and hydrophobic surfaces. However, there was a significant reduction in the mean and active chemiluminescence activity of neutrophils to serum-coated hydrophilic titanium surfaces than to serum-coated hydrophobic titanium surfaces. This suggests that surface hydrophilicity promotes enhanced adsorption of serum proteins, which leads to decreased provocation of initial immune cells and reduction of local oxygen radical production during wound healing. This can help explain the faster osseointegration demonstrated by hydrophilic titanium implants
Evidence of re-osseointegration after electrolytic cleaning and regenerative therapy of peri-implantitis in humans: a case report with four implants.
OBJECTIVE
To evaluate re-osseointegration after electrolytic cleaning and regenerative therapy of dental implants with peri-implantitis in humans.
MATERIAL AND METHODS
Four dental implants that developed peri-implantitis underwent electrolytic cleaning followed by regenerative therapy with guided bone regeneration. All four implants developed recurrent peri-implantitis and were therefore explanted 6 to 13Â months later. Radiographic bone level, probing depth, and bleeding on probing were determined at the time of surgery, 6Â months later, and before implant retrieval. The peri-implant tissues were histologically and histomorphometrically analyzed.
RESULTS
All four implants demonstrated radiographic and histological bone gain, reduced probing depth, and bleeding on probing. Radiographic bone gain was 5.8 mm mesially and 4.8 mm distally for implant #1, 3.3 mm and 2.3 mm for implant #2, 3.1 mm and 0.5 mm for implant #3, and 3.5 mm and 2.8 mm for implant #4. The histometric mean and maximum vertical bone gain for implant #1 to #4 was 1.65 mm and 2.54 mm, 3.04 mm and 3.47 mm, 0.43 mm and 1.27 mm, and 4.16 mm and 5.22 mm, respectively. The percentage of re-osseointegration for implant #1 to #4 was 21.0%, 36.9%, 5.7%, and 39.0%, respectively. In one implant, the newly formed bone was deposited directly onto calculus on the implant surface.
CONCLUSIONS
We found that (1) re-osseointegration is possible on a formerly contaminated implant surface and (2) the electrolytic cleaning process seems to be effective enough at sites with calculus residues.
CLINICAL RELEVANCE
Since re-osseointegration can be achieved by electrolytic cleaning, this decontamination technique may be considered as a future treatment concept
Sequential osseointegration of a novel implant system based on 3D printing in comparison with conventional titanium implants.
OBJECTIVES
To evaluate the sequential osseointegration of a novel titanium implant system based on a 3D printing technology in comparison with conventional titanium implants.
MATERIAL AND METHODS
Two novel titanium implants based on 3D printing were tested in the mandible of eight Beagle dogs. As a control, two different commercially available titanium implants were used. The implants were staged to accommodate healing periods of 2 and 6 weeks. The primary outcome variable was bone-to-implant contact (BIC) in non-decalcified tissue sections and micro-CT analysis.
RESULTS
Histomorphometrically, the proportions of tissues adjacent to the implant surfaces were similar for all implants, whereas the BIC percentage of new mineralized bone was greater for the control implants after both 2 and 6 weeks (p < .05). Micro-CT analysis revealed increasing osseous volume and BIC from 2 to 6 weeks. In contrast to the histomorphometry, the BIC evaluation with the micro-CT data revealed a significantly higher BIC for the two test implants compared with controls (p < .001). The analysis of the total implant surface area disclosed a value that was approximately double as high for the test compared to the control implants.
CONCLUSIONS
The novel titanium implant system based on 3D printing yielded values for osseointegration that were adequate and satisfactory. The higher percentage of new mineralized bone in the control implants is explained by the fact of a completely different three-dimensional surface area
A Living Cell Repository of the Cranio-/Orofacial Region to Advance Research and Promote Personalized Medicine
The prevalence of congenital anomalies in newborns is estimated to be as high as 6%, many of which involving the cranio-/orofacial region. Such malformations, including several syndromes, are usually identified prenatally, at birth, or rarely later in life. The lack of clinically relevant human cell models of these often very rare conditions, the societal pressure to avoid the use of animal models and the fact that the biological mechanisms between rodents and human are not necessarily identical, makes studying cranio-/orofacial anomalies challenging. To overcome these limitations, we are developing a living cell repository of healthy and diseased cells derived from the cranio-/orofacial region. Ultimately, we aim to make patient-derived cells, which retain the molecular and genetic characteristics of the original anomaly or disease in vitro, available for the scientific community. We report our efforts in establishing a human living cell bank derived from the cranio-/orofacial region of otherwise discarded tissue samples, detail our strategy, processes and quality checks. Such specific cell models have a great potential for discovery and translational research and might lead to a better understanding and management of craniofacial anomalies for the benefit of all affected individuals
Clinical and histologic evaluation of heterotopic mucosa transpositioning at teeth and dental implants.
AIM
To investigate the healing after heterotopic mucosa transpositioning at dental implants and teeth.
MATERIALS AND METHODS
One hemimandible per dog (n = 4) was allocated to receive 3 implants (test), whereby 3 premolars on the contralateral side served as controls. After osseointegration, a Z-plasty was performed on the buccal aspect of the test and control sites to heterotopically move the zone of keratinized tissue (KT) into a region with non-keratinized tissue (nKT) and vice versa. Clinical measurements were performed before (T0) and at 12 weeks following heterotopic transposition (T1). Thereafter, specimens were processed for histological analysis.
RESULTS
Clinical measurements revealed that at T1, a band of KT was reestablished at teeth (mean: 2.944 ± 1.866 mm), whereas at implants, the transpositioned nKT resulted in a mucosa without any signs of keratinization (mean: 0 mm; p < .0001). At implant sites, the probing attachment level loss was more pronounced compared to tooth sites (-1.667 ± 1.195 mm and -1.028 ± 0.878 mm, respectively; p = .0076). Histologically, the transpositioned nKT, was accompanied by the formation of KT at the tooth but not at implant sites. The supracrestal soft tissues were statistically significantly higher at tooth compared to implant sites (2.978 ± 0.483 mm and 2.497 ± 0.455 mm, p = .0083). The transpositioned KT remained mostly unaltered in its morphological characteristics.
CONCLUSIONS
The findings of this study indicate that: (a) transpositioned KT may retain its morphological characteristics; and (b) transpositioned nKM was accompanied by the formation of KT at the tooth but not at implant sites
- …