Flow over Hills: A Large-Eddy Simulation of the Bolund Case

Simulation of local atmospheric flows around complex topography is important for several applications in wind energy (short-term wind forecasting and turbine siting and control), local weather prediction in mountainous regions and avalanche risk assessment. However, atmospheric simulation around steep mountain topography remains challenging, and a number of different approaches are used to represent such topography in numerical models. The immersed boundary method (IBM) is particularly well-suited for efficient and numerically stable simulation of flow around steep terrain. It uses a homogenous grid and permits a fast meshing of the topography. Here, we use the IBM in conjunction with a large-eddy simulation (LES) and test it against two unique datasets. In the first comparison, the LES is used to reproduce experimental results from a wind-tunnel study of a smooth three-dimensional hill. In the second comparison, we simulate the wind field around the Bolund Hill, Denmark, and make direct comparisons with field measurements. Both cases show good agreement between the simulation results and the experimental data, with the largest disagreement observed near the surface. The source of error is investigated by performing additional simulations with a variety of spatial resolutions and surface roughness propertie

Effectiveness of Varenicline as an Aid to Smoking Cessation in Primary Care: An Observational Study

Aims: Although varenicline is commonly prescribed in primary care, information on smoking-related comorbidities and the effectiveness of varenicline in this context in Germany is scarce. This study assessed the efficacy and safety of varenicline in a large sample of patients seeking smoking cessation treatment through their general practitioners. The frequency of comorbidities was also evaluated. Methods: This was a 12-week, prospective, observational, non-comparative phase IV trial conducted in Germany. Abstinence rates at week 12 were evaluated by verbal reporting using the nicotine use inventory. Results: Overall, 1,391 subjects were enrolled; 1,177 received study medication and were evaluated for effectiveness and safety. At the end of the study, 71.1% (95% confidence interval 68.5–73.7) of subjects were abstinent. There were a total of 205 all-causality adverse events; 2.2% were classified as serious or severe. There were no fatal adverse events. At inclusion, 66.7% of participants had at least 1 concurrent comorbidity, with chronic obstructive pulmonary disease (35.5%), hypertension (29.6%) and depression (10.4%) being the most commonly reported. Conclusion: These real-world data indicate that varenicline is an effective and well-tolerated smoking cessation treatment when used in the primary care setting including patients with smoking-related comorbidities

Adsorption configurations of Co-phthalocyanine on In2O3(111)

Indium oxide offers optical transparency paired with electric conductivity, a combination required in many optoelectronic applications. The most-stable In2O3(111) surface has a large unit cell (1.43 nm lattice constant). It contains a mixture of both bulk-like and undercoordinated O and In atoms and provides an ideal playground to explore the interaction of surfaces with organic molecules of similar size as the unit cell. Non-contact atomic force microscopy (nc-AFM), scanning tunneling microscopy (STM), and density functional theory (DFT) were used to study the adsorption of Co-phthalocyanine (CoPc) on In2O3(111). Isolated CoPc molecules adsorb at two adsorption sites in a 7:3 ratio. The Co atom sits either on top of a surface oxygen ('F configuration') or indium atom ('S configuration'). This subtle change in adsorption site induces bending of the molecules, which is reflected in their electronic structure. According to DFT the lowest unoccupied molecular orbital of the undistorted gas-phase CoPc remains mostly unaffected in the F configuration but is filled by one electron in S configuration. At coverages up to one CoPc molecule per substrate unit cell, a mixture of domains with molecules in F and S configuration are found. Molecules at F sites first condense into a F-(2x2) structure and finally rearrange into a F-(1x1) symmetry with partially overlapping molecules, while S-sited molecules only assume a S-(1x1) superstructure

Frequency comb offset dynamics of SESAM modelocked thin disk lasers

We present a detailed study of the carrier-envelope offset (CEO) frequency dynamics of SESAM modelocked thin disk lasers (TDLs) pumped by kW-class highly transverse multimode pump diodes with a typical M2 value of 200-300, and give guidelines for future frequency stabilization of multi-100-W oscillators. We demonstrate CEO frequency detection with > 30 dB signal-to-noise ratio with a resolution bandwidth of 100 kHz from a SESAM modelocked Yb:YAG TDL delivering 140 W average output power with 748-fs pulses at 7-MHz pulse repetition rate. We compare with a low-power CEO frequency stabilized Yb:CALGO TDL delivering 2.1 W with 77-fs pulses at 65 MHz. For both lasers, we perform a complete noise characterization, measure the relevant transfer functions (TFs) and compare them to theoretical models. The measured TFs are used to determine the propagation of the pump noise step-by-step through the system components. From the noise propagation analysis, we identify the relative intensity noise (RIN) of the pump diode as the main contribution to the CEO frequency noise. The resulting noise levels are not excessive and do not prevent CEO frequency stabilization. More importantly, the laser cavity dynamics are shown to play an essential role in the CEO frequency dynamics. The cavity TFs of the two lasers are very different which explains why at this point a tight CEO frequency lock can be obtained with the Yb:CALGO TDL but not with the Yb:YAG TDL. For CEO stabilization laser cavities should exhibit high damping of the relaxation oscillations by nonlinear intra-cavity elements, for example by operating a SESAM in the roll-over regime. Therefore the optimum SESAM operation point is a tradeoff between enough damping and avoiding multiple pulsing instabilities. Additional cavity components could be considered for supplementary damping independent of the SESAM operation point

The financial and fiscal stress interconnectedness : the case of G5 economies

In this paper, we focus on the financial and fiscal stress transmission for the G5 economies. Using financial and fiscal stress indexes, we assess the spillovers within each economy, as well as the cross-sectional effects. Two supplementary methodologies, measuring the degree of interconnectedness, are employed. Our findings indicate that the interactions between these two kinds of distress are intensive, especially during and after the Global Financial Crisis outbreak. The above reiterates the necessity for coordinated macroprudential policies, as a means to confine the adverse effects of excessive financial and fiscal stress

Efficient Spectral Broadening in the 100-W Average Power Regime Using Gas Filled Kagome HC-PCF and Pulse Compression

We present nonlinear pulse compression of a high-power SESAM-modelocked thin-disk laser (TDL) using an Ar-filled hypocycloid-core Kagome Hollow-Core Photonic Crystal Fiber (HC-PCF). The output of the modelocked Yb:YAG TDL with 127 W average power, a pulse repetition rate of 7 MHz, and a pulse duration of 740 fs was spectrally broadened 16-fold while propagating in a Kagome HC-PCF containing 13 bar of static Argon gas. Subsequent compression tests performed using 8.4% of the full available power resulted in a pulse duration as short as 88 fs using the spectrally broadened output from the fiber. Compressing the full transmitted power through the fiber (118 W) could lead to a compressed output of >100 W of average power and >100 MW of peak power with an average power compression efficiency of 88%. This simple laser system with only one ultrafast laser oscillator and a simple single-pass fiber pulse compressor, generating both high peak power >100 MW and sub-100-fs pulses at megahertz repetition rate, is very interesting for many applications such as high harmonic generation and attosecond science with improved signal-to-noise performance