717 research outputs found
Analysis of seismically-isolated two-block systems using a multi–rocking-body dynamic model
A novel multibody rocking model is developed to investigate the dynamic response of two stacked rigid blocks placed on a linear base isolation device. The model is used to investigate the dynamic response of a realistic statue-pedestal system subject to pulse-like ground motions. The analysis shows that, in general, base isolation increases the safety level of the rocking system. However, for large period pulses or small size blocks, the isolator can amplify the ground motion, resulting in a lower minimum overturning acceleration than for the nonisolated system. Further, the amplification or shock spectrum of a linear mass-dashpot-spring oscillator, was found to be the reciprocal of the minimum nondimensional overturning acceleration of the investigated rocking system. Novel rocking spectra are obtained by normalizing the frequency of the pulse by the frequency of the isolator. The analysis also demonstrates how the dynamic response of the two stacked blocks is equivalent to that of a single-block configuration coincident with the whole system assumed monolithic or the upper block alone, whichever is more slender
Computational Issues Associated with Automatic Calculation of Acute Myocardial Infarction Scores
Non-linear dynamic model of a two-bodies vertical spanning wall elastically restrained at the top
Understanding the out-of-plane behavior of unreinforced masonry walls is crucial in seismic assessment of existing buildings. Here, the dynamic response of a vertical spanning strip wall, connected to a flexible diaphragm at the top, is investigated. Despite the simplicity of the model, two rocking rigid bodies elastically restrained at the top, the dynamic response is highly nonlinear. This behavior is due to different phenomena: when in motion the system may assume different configurations, with the transition between them due either to impacts or crack opening caused by ground acceleration. An analytical model capable to capture the complex dynamic response of the system is implemented. The equations of motion are first derived, using variational methods, then the events that the system can undergo during motion are studied. Finally, in order to show the potential of the model, some numerical exemplifications are presented applying an earthquake record and a sine pulse to the system
Structural and Thermal Behaviour of a Timber-concrete Prefabricated Composite Wall System
Abstract Wood is the oldest building materials and still now it plays an important role in the construction sector. There are many general advantages in using timber for building purposes. First of all, it is an environmentally friendly, easily recyclable material; it has a low weight in relation to strength, which is advantageous for transport, handling and production; moreover wood has aesthetic qualities, which give great possibilities in architectural design. Lastly wooden structures have an excellent performance in case of earthquake if compared to traditional structures. In Europe the development of the timber-concrete composite structures (TCC) began during a shortage of steel for reinforcement in concrete in the beginning of XX century. TCC application was primarily a refurbishment technique for old historical buildings, during the last 50 years interest in TCC systems has increased, resulting in the construction also of new buildings. This paper presents the analysis of the structural and thermal behaviour of an timber-concrete prefabricated composite wall system, the Concrete Glulam Framed Panel (CGFP) which is a panel made of a concrete slab and a structural glulam frame. The research analyses the structural performance with quasi-static in-plane tests, focused on the in-plane strength and stiffness of individual panels, and the thermal behaviour of the system with steady state tests using an hot box apparatus. The results validate the efficacy of proposed system ensuring the resistance and the dissipative structural behaviour through the hierarchy response characterized by the wood frame, the braced reinforced concrete panel of the singular module and by the rocking effects of global system. On the other side hot-box measures demonstrated a high level of thermal resistance of the system reaching U-values around 0,20 W m -2 K -1 . Moreover experimental data permitted to calibrate a FEM model with which will be possible to study and analyse the panels in different conditions and configuration in both mechanical and thermal field
Effect of manidipine-simvastatin combination on fibrinolysis, adhesion molecules and C-reactive protein in hypertensive hypercholesterolemic patients
n/
Genome-Wide snp analysis of southern african populations provides new insights into the dispersal of bantu-Speaking groups
The expansion of Bantu-speaking agropastoralist populations had a great impact on the genetic, linguistic, and cultural variation of sub-Saharan Africa. It isgenerally accepted that Bantulanguages originated inanarea around thepresent borderbetweenCameroon and Nigeria approximately 5,000 years ago, from where they spread South and East becoming the largest African linguistic branch. The demic consequences of this event are reflected in the relatively high genetic homogeneity observed acrossmost of sub-Saharan Africapopulations. Inthiswork, weexploredgenome-wide singlenucleotidepolymorphismdata from28populations to characterize the genetic components present in sub-Saharan African populations. Combining novel data from four SouthernAfrican populations withpreviouslypublishedresults,we reject the hypothesis that the" non-Bantu" geneticcomponent reported inSouth-Eastern Africa (Mozambique) reflects extensive gene flow between incoming agriculturalist and resident hunter-gatherer communities.We alternatively suggest that this novel component is the result of demographic dynamics associated with the Bantu dispersal
An electrochemical compatibility investigation of RTIL-based electrolytes with Si-based anodes for advanced Li-ion batteries
Silicon is amongst the most attractive anode materials for Li-ion batteries because of its high gravimetric and volumetric capacity; importantly, it is also abundant and cheap, thus sustainable. For a widespread practical deployment of Si-based electrodes, research efforts must focus on significant breakthroughs to addressing the major challenges related to their poor cycling stability. In this work, we focus on the electrolyte-electrode relationships to support the scientific community with a systematic overview of Si-based cell design strategies reporting a thorough electrochemical study of different room temperature ionic liquid (RTIL)-based electrolytes, which contain either lithium bis(fluorosulfonyl)imide (LiFSI) or lithium bis(trifluoromethylsulfonyl)imide (LiTFSI). Their galvanostatic cycling performance with mixed silicon/graphite/few-layer graphene electrodes are evaluated, with first cycle coulombic efficiency approaching 90% and areal capacity ≈2 mAh/cm2 in the limited cut-off range of 0.1–2 V vs. Li+/Li0. The investigation evidences the superior characteristics of the FSI-based RTILs with respect to the TFSI-based one, which is mostly associated with the superior SEI forming ability of FSI-based systems, even without the use of specific additives. In particular, the LiFSI-EMIFSI electrolyte composition shows the best performance in both Li-half cells and Li-ion cells in which the Si-based electrodes are coupled with 4V-class composite NMC-based cathodes
Subcutaneous Adipose Tissue Transcriptome Highlights Specific Expression Profiles in Severe Pediatric Obesity: A Pilot Study
The prevalence of pediatric obesity is rising rapidly worldwide, and "omic" approaches are helpful in investigating the molecular pathophysiology of obesity. This work aims to identify transcriptional differences in the subcutaneous adipose tissue (scAT) of children with overweight (OW), obesity (OB), or severe obesity (SV) compared with those of normal weight (NW). Periumbilical scAT biopsies were collected from 20 male children aged 1-12 years. The children were stratified into the following four groups according to their BMI z-scores: SV, OB, OW, and NW. scAT RNA-Seq analyses were performed, and a differential expression analysis was conducted using the DESeq2 R package. A pathways analysis was performed to gain biological insights into gene expression. Our data highlight the significant deregulation in both coding and non-coding transcripts in the SV group when compared with the NW, OW, and OB groups. A KEGG pathway analysis showed that coding transcripts were mainly involved in lipid metabolism. A GSEA analysis revealed the upregulation of lipid degradation and metabolism in SV vs. OB and SV vs. OW. Bioenergetic processes and the catabolism of branched-chain amino acids were upregulated in SV compared with OB, OW, and NW. In conclusion, we report for the first time that a significant transcriptional deregulation occurs in the periumbilical scAT of children with severe obesity compared with those of normal weight or those with overweight or mild obesity
Whole mitochondrial DNA sequencing in Alpine populations and the genetic history of the Neolithic Tyrolean Iceman
The Tyrolean Iceman is an extraordinarily well-preserved natural mummy that lived south of the Alpine ridge ~5,200 years before present (ybp), during the Copper Age. Despite studies that have investigated his genetic profile, the relation of the Iceman´s maternal lineage with present-day mitochondrial variation remains elusive. Studies of the Iceman have shown that his mitochondrial DNA (mtDNA) belongs to a novel lineage of haplogroup K1 (K1f) not found in extant populations. We analyzed the complete mtDNA sequences of 42 haplogroup K bearing individuals from populations of the Eastern Italian Alps – putatively in genetic continuity with the Tyrolean Iceman—and compared his mitogenome with a large dataset of worldwide K1 sequences. Our results allow a re-definition of the K1 phylogeny and indicate that the K1f haplogroup is absent or rare in present-day populations. We suggest that mtDNA Iceman´s lineage could have disappeared during demographic events starting in Europe from ~5,000 ybp. Based on the comparison of our results with published data, we propose a scenario that could explain the apparent contrast between the phylogeographic features of maternal and paternal lineages of the Tyrolean Iceman within the context of the demographic dynamics happening in Europe from 8,000 ybp.This study was financed by the Provincia Autonoma di Bolzano – Alto Adige, Ripartizione Diritto allo studio, università e ricerca scientifica, funds to VCS
- …