Effects of Lactobacillus Reuteri E81 Added into Rations of Chukar Partridges (Alectoris Chukar) Fed Under Heat Stress Conditions on Fattening Performance and Meat Quality

BAYRAKTAR, BULENT/0000-0002-2335-9089; Kaya, Hacer/0000-0001-9024-8525; GUL, MEHMET/0000-0001-5477-1773; kamiloglu, aybike/0000-0002-6756-0331; TEKCE, EMRE/0000-0002-6690-725XWOS: 000569515700011This study investigated the effects of the addition of Lactobacillus reuteri E81 (LRE) into rations of chukar partridges (Alectoris chukar) fed under heat stress (HS) conditions on fattening performance and meat quality. This study included 256 chukar partridges aged 1 day. the study comprised an adaptation period of 7 days and a fattening period of 35 days and included 8 different groups with 32 animals in each group. Each group was further divided into four subgroups with eight animals in each subgroup. At the end of the study, the best results in terms of fattening performance in the non-HS groups were obtained in the LRE 600 ppm group and in the HS groups, SLRE 200 ppm had the best effect on average live weight and average live weight increase, whereas SLRE 400 ppm had the best effect on FCR (p<0.05). the analysis of the samples collected from chukar partridges on day 21 showed that, there was no effect on the colour parameters and Thiobarbituric acid reactive substances (TBARS) level in the LRE in the HS and non-HS groups, whereas the meat pH level decreased in the SLRE 400 ppm group (p<0.05). the analysis of the samples collected on day 42 showed that there was no effect on colour parameters in the HS and non-HS groups. TBARS level decreased at the dose of LRE 200 ppm in the non-HS group, and the meat pH level decreased in both HS and non-HS groups (p<0.05).scientific research projects commission of Bayburt University, Bayburt, Turkey [2018/02-69001-02]This study was conducted pursuant to the approval (dated 12.11.2019 and numbered 2019/15) of the Local Ethics Board for Animal Experiments of Directorate of Veterinary Control Center Research Institute. This study was funded and supported by the scientific research projects commission of Bayburt University, Bayburt, Turkey (Project code: 2018/02-69001-02). the authors declare that they have no conflict of interest

Electrospraying method for fabrication of essential oil loaded-chitosan nanoparticle delivery systems characterized by molecular, thermal, morphological and antifungal properties

Fabrication of essential oil loaded-chitosan nanoparticles using electrospraying technique appears to be a novel strategy to develop thermally stable nanoparticles possessing higher encapsulation efficiency and particle stability. This study aims to fabricate chitosan nanoparticles (CNPs) loaded with Origanum vulgare essential oil (OEO, Origanum vulgare L.) at different proportions (OEO/CH proportions of 0:1, 0.0625:1, 0.125:1, 0.25:1 and 0.5:1 mL/g) using electrospraying technique. The CNPs were characterized in term of their particle size and stability (dynamic light scattering), encapsulation efficiency (spectrophotometry), and molecular (Fourier transform infrared spectroscopy), thermal (differential scanning calorimetry/thermogravimetric analysis), morphological (scanning electron microscopy) and antifungal (agar dilution method) and fungistatic activity properties. The average particle sizes of the CNPs ranged between 290 and 483 nm with a spherical morphology. Positively charged surface characteristics were observed to increase with the increment of OEO concentration in CNPs. The encapsulation efficiency values were determined in the range of 70.1 and 79.6%. The molecular and thermal analyses exposed very decent encapsulation of OEO into thermally stable chitosan nanoparticles. Morphological analysis verified the spherical shapes of these nanoparticles. Above all, the antifungal effectiveness of OEO against the Alternaria alternata AY1 could be significantly (p < 0.05) increased by its encapsulation into chitosan nanoparticles fabricated by the electrospraying technique. Consequently, it can be stated that the electrospraying technique developed is able to fabricate thermally stable nanoparticles owning higher encapsulation efficiency and particle stability. The results and findings suggest that the electrospraying technique would be a promising method to fabricate chitosan-based nanoparticles as an antimicrobial agent to control their release in a prolonged preservative effect in cosmetic, pharmaceutical and food applications for adjustable dosage forms. Industrial relevance: The fungal agents such as Alternaria alternata cause great damages on post-harvest fresh fruits and vegetables, thus leading to a great economical lose. Therefore, a great variety of methods in struggling with disease have been previously proposed. Nowadays, the most effective leading methods to struggle against plant diseases are those applied with synthetic fungicides to minimize such lose in post-harvest fruit and vegetables. However, intensive and unconscious use of the fungicides leads the pathogens to develop resistance against these agents as well as to accumulation of chemical residues in soil, water and air and finally to formation of carcinogenic effects on human health. Nowadays, a great effort is being exerted to develop novel biodegradable and natural antimicrobial agents for struggling fungal spoilage in postharvest products. Essential oils are among the most widely used natural struggling methods. Essential oils obtained from plants have been extensively used since they are natural antimicrobial agents. However, they cannot be effectively used in spite of their extensive applications. Recently, some researches in the field of nanotechnology have demonstrated that the effectiveness of active substances could be increased by using some techniques. In this respect, we aimed at developing essential-oil-loaded-chitosan-nanoparticle delivery systems using an electrospraying deposition system to prevent fungal colonization on food and plant materials. By increasing antifungal effectiveness of essential oils by their encapsulation into nanoparticles, it will be possible to decrease the levels of regularly applied dose and reflect the obtained outcomes to the food and agriculture industry. This study is the first example of production of essential oil loaded nanoparticles using the electrospraying-hydrodynamic process and showed that encapsulation of oregano essential oil into chitosan based nanoparticles (CNPs) by using the electrospraying deposition technique considerably increased the antifungal effectiveness of the Origanum vulgare essential oil. Our results highlight the potential use of the chitosan nanoparticles (CNPs) loaded with different amounts of Origanum vulgare in food and agriculture industry as an effective fungicidal material against Alternaria alternata, suggesting that the CNPs can be promising tools to compete with synthetic fungicide counterparts and limit use of synthetic ones for struggling of food and plant pathogens. Therefore, the results of this study should be of great importance to industrial applications in terms of development of natural, but effective preservatives as alternative to synthetic ones. In this respect, the CNPs would find a great industrial application area in the food and agriculture industry which seek natural preservatives due to the recent health concerns. © 201

Structure and biosynthesis of two exopolysaccharides produced by Lactobacillus johnsonii FI9785

Exopolysaccharides were isolated and purified from Lactobacillus johnsonii FI9785, which has previously been shown to act as a competitive exclusion agent to control Clostridium perfringens in poultry. Structural analysis by NMR spectroscopy revealed that L. johnsonii FI9785 can produce two types of exopolysaccharide: EPS-1 is a branched dextran with the unusual feature that every backbone residue is substituted with a 2-linked glucose unit, and EPS-2 was shown to have a repeating unit with the following structure: -6)-α-Glcp-(1-3)-β-Glcp-(1-5)-β-Galf-(1-6)-α-Glcp-(1-4) -β-Gal p-(1-4)-β-Glcp-(1-. Sites on both polysaccharides were partially occupied by substituent groups: 1-phosphoglycerol and O-acetyl groups in EPS-1 and a single O-acetyl group in EPS-2. Analysis of a deletion mutant (δepsE) lacking the putative priming glycosyltransferase gene located within a predicted eps gene cluster revealed that the mutant could produce EPS-1 but not EPS-2, indicating that epsE is essential for the biosynthesis of EPS-2. Atomic force microscopy confirmed the localization of galactose residues on the exterior of wild type cells and their absence in the δepsE mutant. EPS2 was found to adopt a random coil structural conformation. Deletion of the entire 14-kb eps cluster resulted in an acapsular mutant phenotype that was not able to produce either EPS-2 or EPS-1. Alterations in the cell surface properties of the EPS-specific mutants were demonstrated by differences in binding of an anti-wild type L. johnsonii antibody. These findings provide insights into the biosynthesis and structures of novel exopolysaccharides produced by L. johnsonii FI9785, which are likely to play an important role in biofilm formation, protection against harsh environment of the gut, and colonization of the host

Effects of on bacterial translocation in thioacetamide-induced liver injury in rats

Background and study aim: The aim of the present study was to investigate the effects of Lycium barbarum (LB) on bacterial translocation (BT) frequency in thioacetamide (TAA)-induced liver injury in rats. Materials and methods: Group 1 was the control. In group 2 (TAA), rats received TAA daily for 3 days. In group 3 (TAA+LB), Lycium barbarum was administered orally 25 mg/kg for 21 days prior to the first TAA injection. In group 4 (LB), rats received only Lycium barbarum . Results: In our study, Lycium barbarum treatment did not attenuate liver damage. Lycium barbarum treatment decreased ileal E. coli counts and intestinal damage but it did not alter BT frequency. Conclusions: In conclusion, the effects of Lycium barbarum on BT may be related to ongoing severe liver damage in this model