GPU-accelerated large-eddy simulation of ship-ice interactions

This paper reports on the applicability of the Lattice Boltzmann based free surface flow solver elbe to the simulation of complex ship-ice interactions in marine engineering. In order to model the dynamics of these colliding rigid multi-body systems, elbe is coupled to the ODE physics engine. First, basic validations of the ODE collision and friction models are presented, particularly focusing on interacting triangle meshes that later will serve to describe the ice floes. Then, the basic methodology and initial validation of the fluid-structure coupling of elbe and ODE is presented. Finally, performance is addressed: As elbe uses graphics processing units (GPUs) to accelerate the numerical calculations, the coupled numerical tool allows for investigations of ship-ice interactions in very competitive computational time and on off-the-shelf desktop hardware

Differential thermal analysis and solution growth of intermetallic compounds

To obtain single crystals by solution growth, an exposed primary solidification surface in the appropriate, but often unknown, equilibrium alloy phase diagram is required. Furthermore, an appropriate crucible material is needed, necessary to hold the molten alloy during growth, without being attacked by it. Recently, we have used the comparison of realistic simulations with experimental differential thermal analysis (DTA) curves to address both these problems. We have found: 1) complex DTA curves can be interpreted to determine an appropriate heat treatment and starting composition for solution growth, without having to determine the underlying phase diagrams in detail. 2) DTA can facilitate identification of appropriate crucible materials. DTA can thus be used to make the procedure to obtain single crystals of a desired phase by solution growth more efficient. We will use some of the systems for which we have recently obtained single-crystalline samples using the combination of DTA and solution growth as examples. These systems are TbAl, Pr$_7$Ni$_2$Si$_5$, and YMn$_4$Al$_8$.Comment: 17 pages, 8 figure

The effect of periprosthetic bone loss on the failure risk of tibial total knee arthroplasty

The effect of long-term periprosthetic bone loss on the process of aseptic loosening of tibial total knee arthroplasty (TKA) is subject to debate. Contradicting studies can be found in literature, reporting either bone resorption or bone formation before failure of the tibial tray. The aim of the current study was to investigate the effects of bone resorption on failure of tibial TKA, by simulating clinical postoperative bone density changes in finite element analysis (FEA) models and FEA models were created of two tibiae representing cases with good and poor initial bone quality which were subjected to a walking configuration and subsequently to a traumatic stumbling load. Bone failure was simulated using a crushable foam model incorporating progressive yielding. Repetitive loading under a level walking load did not result in failure of the periprosthetic bone in neither the good nor poor bone quality tibia at the baseline bone densities. When applying a stumble load, a collapse of the tibial reconstruction was noticed in the poor bone quality model. Incorporating postoperative bone loss led to a significant increase of the failure risk, particularly for the poor bone quality model in which subsidence of the tibial component was substantial. Our results suggest bone loss can lead to an increased risk of a collapse of the tibial component, particularly in case of poor bone quality at the time of surgery. The study also examined the probability of medial or lateral subsidence of the implant and aimed to improve clinical implications. The FEA model simulated plastic deformation of the bone and implant subsidence, with further validation required via mechanical experiments.</p

A small sealed Ta crucible for thermal analysis of volatile metallic samples

Differential thermal analysis on metallic alloys containing volatile elements can be highly problematic. Here we show how measurements can be performed in commercial, small-sample, equipment without modification. This is achieved by using a sealed Ta crucible, easily fabricated from Ta tubing and sealed in a standard arc furnace. The crucible performance is demonstrated by measurements on a mixture of Mg and MgB$_2$, after heating up to 1470$^{\circ}{\rm C}$. We also show data, measured on an alloy with composition Gd$_{40}$Mg$_{60}$, that clearly shows both the liquidus and a peritectic, and is consistent with published phase diagram data

UK Breastfeeding Helpline support: An investigation of influences upon satisfaction

Background Incentive or reward schemes are becoming increasingly popular to motivate healthy lifestyle behaviours. In this paper, insights from a qualitative and descriptive study to investigate the uptake, impact and meanings of a breastfeeding incentive intervention integrated into an existing peer support programme (Star Buddies) are reported. The Star Buddies service employs breastfeeding peer supporters to support women across the ante-natal, intra-partum and post-partum period. Methods In a disadvantaged area of North West England, women initiating breastfeeding were recruited by peer supporters on the postnatal ward or soon after hospital discharge to participate in an 8 week incentive (gifts and vouchers) and breastfeeding peer supporter intervention. In-depth interviews were conducted with 26 women participants who engaged with the incentive intervention, and a focus group was held with the 4 community peer supporters who delivered the intervention. Descriptive analysis of routinely collected data for peer supporter contacts and breastfeeding outcomes before and after the incentive intervention triangulated and retrospectively provided the context for the qualitative thematic analysis. Results A global theme emerged of 'incentives as connectors', with two sub-themes of 'facilitating connections' and 'facilitating relationships and wellbeing'. The incentives were linked to discussion themes and gift giving facilitated peer supporter access for proactive weekly home visits to support women. Regular face to face contacts enabled meaningful relationships and new connections within and between the women, families, peer supporters and care providers to be formed and sustained. Participants in the incentive scheme received more home visits and total contact time with peer supporters compared to women before the incentive intervention. Full participation levels and breastfeeding rates at 6-8 weeks were similar for women before and after the incentive intervention. Conclusion The findings suggest that whilst the provision of incentives might not influence women's intentions or motivations to breastfeed, the connections forged provided psycho-social benefits for both programme users and peer supporters

Strain shielding in trabecular bone at the tibial cement-bone interface

Item does not contain fulltextAseptic loosening of the tibial component remains the leading cause for revision surgery in total knee arthroplasty (TKA). Understanding the mechanisms leading to loss of fixation can offer insight into preventative measures to ensure a longer survival rate. In cemented TKA, loosening occurs at the cement-trabecular interface probably due to a stress-shielding effect of the stiffer implant material in comparison with bone. Using finite element models of lab-prepared tibial cement-trabeculae interface specimens (n=4) based on micro-CT images, this study aims to investigate the micromechanics of the interlock between cement and trabecular bone. Finite element micromotion between cement and trabeculae and bone strain were compared in the interdigitated trabeculae as well as strain in the bone distal to the interface. Lab-prepared specimens and their FE models were assumed to represent the immediate post-operative situation. The cement layer was removed in the FE models while retaining the loading conditions, which resulted in FE models that represented the pre-operative situation. Results showed that micromotion and bone strain decrease when interdigitation depth increases. Bone-cement micromotion and bone strain at the distal interdigitated region showed a dependence on bone volume fraction. Comparing the immediate post-operative and pre-operative situations, trabeculae embedded deep within the cement generally showed the highest level of strain-shielding. Strain shielding of interdigitated bone, in terms of reduction in compressive strains, was found to be between 35 and 61 % for the four specimens. Strain adaptive remodeling could thus be a plausible mechanism responsible for loss of interdigitated bone

Computational tibial bone remodeling over a population after total knee arthroplasty:A comparative study

Periprosthetic bone loss is an important factor in tibial implant failure mechanisms in total knee arthroplasty (TKA). The purpose of this study was to validate computational postoperative bone response using longitudinal clinical DEXA densities. Computational remodeling outcome over a population was obtained by incorporating the strain‐adaptive remodeling theory in finite element (FE) simulations of 26 different tibiae. Physiological loading conditions were applied, and bone mineral density (BMD) in three different regions of interest (ROIs) was considered over a postoperative time of 15 years. BMD outcome was compared directly to previously reported clinical BMD data of a comparable TKA cohort. Similar trends between computational and clinical bone remodeling over time were observed in the two proximal ROIs, with most rapid bone loss taking place in the initial months after TKA and BMD starting to level in the following years. The extent of absolute proximal BMD change was underestimated in the FE population compared with the clinical subject group, which might be the result of significantly higher initial clinical baseline BMD values. Large differences in remodeling response were found in the distal ROI, in which resorption was measured clinically, but a large BMD increase was predicted by the FE models. Multiple computational limitations, related to the FE mesh, loading conditions, and strain‐adaptive algorithm, likely contributed to the extensive local bone formation. Further research incorporating subject‐specific comparisons using follow‐up CT scans and more extensive physiological knee loading is recommended to optimize bone remodeling more distal to the tibial baseplate